PRODUCT WARNING AND RECALL NOTICE WINCHESTER® 9mm Luger 115 grain

Olin Winchester, LLC is recalling the following lots of 9mm Luger 115 grain Full Metal Jacket and 115 grain Jacketed Hollow Point pistol ammunition.

Symbols: Q4172, RED9, USA9JHP, USA9MMVP, USA9W, WW9B

Lot Numbers:
SC03LD44, SC03LD45, SC03LD46, SC03LD47
SC13LD1, SC13LD6, SC13LD18, SC13LD44, SC13LD45, SC13LD46, SC13LD47
SC52LD44, SC52LD45, SC52LD46, SC52LD47
SC62LD44, SC62LD45, SC62LD46, SC62LD47
SC72LD44, SC72LD45, SC72LD46, SC72LD47
SC92LD44, SC92LD45, SC92LD46, SC92LD47
SD10LD1, SD10LD3, SD10LD6, SC10LD12, SD10LD18, SD10LD46, SD10LD47
SD50LD1, SD50LD3, SD50LD6, SD50LD11, SD50LD12, SD50LD18, SD50LD46, SD50LD47
SD60LD1, SD60LD3, SD60LD6, SD60LD11, SD60LD12, SD60LD18
SD70LD1, SD70LD3, SD70LD6, SD70LD11, SD70LD12, SD70LD18
SD80LD1, SD80LD3, SD80LD6, SD80LD11, SD80LD12, SD80LD18

The Symbol designations and locations of the Lot Numbers are depicted in the photographs below.

NOTE: If ammunition of the above Symbols was purchased before March 25, 2021, it is NOT subject to the recall.

Winchester has determined the above lots of 9mm Luger 115 FMJ and JHP ammunition may contain propellant that does not properly ignite and burn when the cartridge is fired. Ammunition containing propellant that does not properly ignite and burn may result in a bullet remaining in the barrel (i.e., a bullet-in-bore obstruction). Firing a subsequent bullet into the bore obstruction could cause firearm damage, rendering the firearm inoperable and subjecting the shooter and bystanders to a risk of serious personal injury.

DO NOT USE WINCHESTER® 9MM LUGER 115 FMJ / JHP OF THE ABOVE SYMBOLS THAT HAS ANY OF THE ABOVE LOT NUMBERS. The ammunition Lot Number is stamped on the cartons of the Symbols involved as indicated here:

Q4172RED9

USA9JHPUSA9MMVP Bulk Pack

USA9MMVP Oriented Bulk PackUSA9W Oriented Bulk Pack

WW9B Five 100-Round Oriented Bulk Packs

To determine if your ammunition is subject to this notice, review the Symbol and Lot Number. If it is any of the above Symbols and Lot Numbers, immediately discontinue use and contact Winchester toll-free at 844-653-8358 for free UPS pick-up of the recalled ammunition. Upon receipt of your recalled ammunition, Winchester will ship replacement ammunition directly to you or issue you a reimbursement check.

This notice applies only to the above 9mm Luger 115 FMJ and JHP Symbols with the above Lot Numbers. Other Symbols or Lot Numbers are not subject to this recall.

If you have any questions concerning this 9mm Luger 115 FMJ / JHP pistol ammunition recall please call toll-free 844-653-8358, write to Winchester (600 Powder Mill Road, East Alton, IL 62024 Attn: 9mm Luger Recall), or visit our website at www.winchester.com.

We apologize for this inconvenience.

WINCHESTER

June 21, 2021

Posted in Alerts, Ammunition, Recall Notices | Tagged , , | Comments Off on PRODUCT WARNING AND RECALL NOTICE WINCHESTER® 9mm Luger 115 grain

Introducing the Delegate

1911s Parts & Accessories Revolvers

THE NEW NIGHTHAWK DELEGATE

The Delegate is the second installment into the Ambassador Series of Nighthawk Custom 1911 pistols. Unlike its predecessor, the Counselor, the Delegate comes chambered in 9mm or .45 ACP, and this time with a 4.25” barrel and commander frame. The Delegate is based on a steel frame and utilizes a stainless-steel mainspring housing and grip safety. We’ve maintained our popular bobbed-concealment beavertail and hammer, making it an ideal candidate for concealed carry.

CALL TODAY

The Delegate maintains the same unique look that has come to be associated with the Ambassador Series. Unique positive front cocking serrations give the Delegate a distinct look, while featuring the more traditional rear cocking serrations. Our patented Flush-Fit Magwell returns with the Delegate, which allows the same overall length of a standard commander frame, but with the magwell included. G10 scales that have been custom engineered for the Ambassador Series were created with Railscales, giving this pistol a thin grip for easy and comfortable concealability. The Delegate is completed with a hand crowned bull barrel, bull nose, and black nitride finish.

DELEGATE FEATURES

• Forged Commander Frame
• Match Grade 9mm/.45ACP Bull Barrel
• Ambassador Front and Rear Cocking Serrations
• Patented Flush-Fit Magwell
• Black Nitride Finish
• Solid Black Heinie Ledge Rear Sight
• Tritium Front Sight
• Railscales G10 Grips
• Crowned Flush-Cut Barrel
• Ultra Hi-Cut Front Strap

EASY FINANCING

Nighthawk Custom is proud to partner with Cornerstone Bank to offer you an easy and affordable financing option for your Nighthawk Custom purchase. Achieving your dream of owning a Nighthawk Custom gun has never been easier…

MILITARY / LE

To thank our country’s Military and Law Enforcement, Nighthawk Custom offers 10% off retail price to all US Military Veterans and Law Enforcement on Nighthawk Custom products.

LEARN MORE SHOP NOW


1306 W Trimble Ave, Berryville, AR 72616

Posted in pistols | Tagged , | Comments Off on Introducing the Delegate

Big Green is Back…On Shelves

Posted in Ammunition | Tagged , | Comments Off on Big Green is Back…On Shelves

Green is Mean! The New Green Optics from Holosun How The World Looks Through the New Green HE509T-GR

Green is Mean! The New Green Optics from Holosun How The World Looks Through the New Green HE509T-GR

City of Industry, Ca. (July 8, 2021) – HOLOSUN introduces the latest version of the titanium HE509T, bringing the high contrast Super Green LED to the HE509T-GR.

There are upsides and downsides to any reticle color, but HOLOSUN’s green LED is three times more efficient than red at the brightest settings and offers a higher contrast than red against more backgrounds.. Green appears brighter to the eye which can help to obtain a sight picture faster in competition, while hunting, and while on duty. Switching from red to green can take some getting used to, however, more and more shooters find that they pick up HOLOSUN’s green reticles faster reducing the time to the first shot.

The HE509T grade-5 titanium housing offers excellent protection of the multi-coated optical glass. The HE509T-GR features ShakeAwake and HOLOSUN’s Super Green LED technology which is efficient enough for 50,000 hours of battery life. Solar Failsafe, one of Holosun’s signature innovations, provides essential illumination in all ambient lighting conditions automatically adjusting to match the environment. With dual power and multi-reticle systems, 10 daylight settings, and 2 night-vision compatible settings, the HE509T-GR provides compatibility with all environments and lighting conditions. 

The HE509T-GR weighs 1.72 oz. and measures 1.61” long, 1.35” tall, and 1.21” wide. The HE509T features a side-mounted battery for easy changes without removing your optic and includes an RMR adapter plate making the 509T compatible with standard RMR interfaces.. The compact size and long list of innovative features make the HE509T a top pick in pistol optics of firearms instructors, self-defenders, and professional users.

Check it out today, and decide for yourself!

Specs:

  • · 2 MOA Dot & 32 MOA Circle Multi-Reticle System
  • · Light Wavelength of 540nm
  • · Green Reticle Color
  • · Parallax Free
  • · Unlimited Eye Relief
  • · 1x Magnification
  • · Multi-Coated Optical Glass
  • · Solar and Battery Powered
  • · CR1632 Battery
  • · 50,000 Hour Battery Life
  • · 10 DL&2 NV Brightness Settings
  • · Titanium Housing and Finish
  • · Window Size 0.66” x 0.9”
  • · Exterior Dimensions 1.60” × 1.16” × 1.13”
  • · 1.72 Oz. Weight
  • · IP67 Water Resistance

Holosun Technologies, Inc., located in City of Industry, California, is committed to

creating innovative optic and laser/IR technologies that benefit a broad range of

shooting, hunting, law enforcement and professional needs. Using the quality

manufacturing standards demanded by some of the best-known optics brands in the

world, with a wide range of affordable options, Holosun is at the forefront of

development of new sight technologies. Key innovations include Shake Awake

TechnologyTM, 50,000-hour battery life, Solar FailSafeTM, Multiple Reticle SystemTM

(MRS), Super Green LED, and IR/Laser units that utilize the most recent advancements

in laser and LED technology. At Holosun, we pride ourselves on providing cutting-edge

equipment at a competitive price that astounds the competition and the end-user.

For more information, please visit www.holosun.com

Posted in sights | Tagged , , | Comments Off on Green is Mean! The New Green Optics from Holosun How The World Looks Through the New Green HE509T-GR

Galco’s Summer Comfort!

Header Logo

PHOENIX, July 2021
Comfortable and convenient, Galco’s Summer Comfort™ IWB features a snap-on design that allows the holster to attach and detach without removing the belt. The reinforced premium steerhide retains its shape when the handgun is removed, allowing an easy return to the holster. The smooth-out leather construction rides comfortably against the body, and features full firing grip clearance for a quick and sure draw.
The Summer Comfort fits
belts up to 1 3/4″, with optional 1 ¼” and 1 ½” belt straps also sold separately.
Galco’s Summer Comfort is the perfect concealed carry holster for all seasons!
See all Galco’s
IWB holsters!

Dealer inquiries:
800-874-2526 
dealersales@galcoholsters.com

Galco International, LTD is the designer and manufacturer of Galco Holsters, the premier American-made brand of superb-quality holsters, belts and accessories. Encompassing law enforcement, military, defensive and sporting use, the Galco brand utilizes leather, nylon and Kydex to meet the demands of today’s consumers. Women’s holster handbags, tactical slings and hunting accessories round out the line. All Galco products are proudly handcrafted in the USA since 1969.

Footer Logo

Footer Logo

Galco International | 2019 West Quail Avenue, Phoenix, AZ 85027

Posted in Holsters | Tagged , , | Comments Off on Galco’s Summer Comfort!

Kestrel Instruments Supports Athletic Safety! | Kestrel Heat Stress Tracker Donation Program

Kestrel Heat Stress Tracker Donation Program

Now Accepting Applications!
Submission Deadline: August 6th, 2021

The Kestrel® Instruments Heat Stress Tracker Donation Program is back again for 2021! With exertional heat stroke as one of the three leading causes of death in sports, heat safety remains a top priority for athletic trainers and coaches. Research shows that onsite WBGT measurement is the most reliable way to monitor the environment and assess heat stress risk. The Kestrel 5400 Heat Stress Tracker offers extremely accurate WBGT monitoring for preventing heat-related illness or injury. The free Kestrel LiNK companion app makes it easy to log, manage, and export practice or game day reports.

The Kestrel 5400 Heat Stress Tracker Pro monitors critical local environmental conditions, including the recommended measurement of Wet Bulb Globe Temperature (WBGT), providing data for the most reliable assessment of heat stress risk.

QUALIFICATIONS
Submissions will be evaluated based on the applicant’s submitted goals, school needs, how Kestrel Instruments equipment will help, and existing barriers to purchasing.
WINNERS
Ten winners will be selected, and each will receive a
Kestrel 5400 Heat Stress Tracker Pro with a vane mount and tripod.
DEADLINE
Must receive entries by August 6th, 2021, at 11:59 PM EST.

The Kestrel 5400 Heat Stress Tracker is trusted by professional organizations like the NFL, MLS, USTA, and Division 1, 2, and 3 Universities.

Start Your Application!

Shop Repairs Support Contact

21 Creek Circle, Boothwyn, PA 19061

Posted in Environmental, Promotions | Tagged , , | Comments Off on Kestrel Instruments Supports Athletic Safety! | Kestrel Heat Stress Tracker Donation Program

Adept Armor Signs with Laura Burgess Marketing (LBM)

Adept Armor, a new ballistic protection design and development company focused on the commercial market, tags Laura Burgess Marketing to help create brand awareness.

Adept Armor Signs with Laura Burgess Marketing (LBM)

Adept Armor, a new ballistic protection design and development company focused on the commercial market, tags Laura Burgess Marketing to help create brand awareness.

Carrollton, Texas (July 2021) – A new armor system engineering firm, Adept Armor, has signed Laura Burgess Marketing (LBM) to represent their public relations and media efforts.

Adept Armor is a company focused on providing civilians, private security, and rescue with state-of-the-art ballistic armor protection. Using leading-edge alloys, metals, and polymers to design and produce body armor, helmets, and other protective gear, Adept Armor’s products offer superior ballistic protection in innovative materials and designs to meet modern needs.

“It is always exciting to get a ringside seat on a new company and product launch,” Laura Burgess, president of Laura Burgess Marketing, said. “Adept Armor is truly a new paradigm in body armor companies, with a focus on the civilian market and really innovative products that are founded on Adept Armor’s highly technical and experienced team’s designs.”

LBM will work with Adept Armor to launch company news, new products, and social media platforms.

Adept Armor recently launched website introduces the public to their first line of body armor featuring a multi-curved titanium alloy plate that is bonded to a high-performance polyethylene backer, creating a body armor plate that has the strength and multi-hit capability traditional in steel body armor with the lighter weight and performance abilities of ceramic-composite body armor.

Interested in armor materials, systems, test methods and current threats? Check out Adept Armor’s incredible knowledgebase of information and glossary. Learn more about Adept Armor on their new website or follow them on Facebook. 

About Adept Armor:

Adept is a materials engineering and industrial design firm that focuses on the development of body armor and infantry equipment and is pioneering the use of titanium alloys, enhanced-matrix UHMWPE materials, and titanium diboride modified ceramics in modern armor plates.

These exotic materials are not used in ways that blithely follow convention. For, in addition to Adept’s expertise in materials engineering, we place extreme importance on product design. In this, we hew to a Parametricist philosophy, which often results in designs that are as novel and unexpected as they are effective. www.adeptarmor.com

Laura Burgess Marketing

P: 603-682-3316

Laura@lauraburgess.com


About Laura Burgess Marketing:

Laura Burgess Marketing provides public relations and marketing communications to companies within the law enforcement, tactical, military, shooting sports, and outdoor markets. A family-run, woman-owned business headed by industry veteran Laura Burgess, the LBM team has over 40 years of combined experience in PR, marketing, social media, and content development. Laura Burgess Marketing’s current client list includes Big Horn Armory, Cimarron Firearms Company, EAA Corporation, GALLS, Innovative Forensic Investigations, MasterPiece Arms Inc., Sentry Products Group, Shell Shock Technologies, Steinel Ammunition, and Tasmanian Tiger®. Laura Burgess Marketing is headquartered in Saint Augustine, Florida.

Posted in Ballistic Protection | Tagged , , | Comments Off on Adept Armor Signs with Laura Burgess Marketing (LBM)

Huk’s New Capers Volley 5.5” Short Delivers Unmatched Performance and Comfort

Charleston, SC (July 8, 2021) – Huk Performance Fishing apparel is proud to introduce the new Capers Volley 5.5” Short, which delivers ultimate versatility, style, and comfort for in and off the water performance. The short’s contemporary cut and water-friendly features will be a favorite for fishing, swimming, boating, wakeboarding, and wake surfing as well as other active outdoor pursuits. From sun up to sun down, the Volley shorts will have you covered.

The Capers Volley Shorts are built with 100% polyester and stretch fabric that provides an incredibly flexible fit and complete freedom of motion in any environment. At the same time, the Capers Volley Short maintains its shape wet or dry, making for a consistent and stylish fit both on the boat or in the waves. Built for sun-soak days, the shorts are UPF rated and quick-drying so which helps to shed moisture rapidly.

Strategically located mesh-lined pockets hold gear, while a mesh liner provides support and allows the shorts to breathe. The shorts are offered in a variety of trendy colors so it will be easy to stock up on supply without breaking the bank.

Huk Capers Volley 5.5” Shorts Features

· 100% polyester

· Stretch fabric

· Quick-drying

· Sun protection

· Mesh liner

· Mesh-lined pockets



Huk Capers Volley 5.5” Shorts

· Six Colors: Fusion Coral, Ice Blue, Black, Sharkskin, Key Lime, and Sargasso Sea

· MSRP: $35 (3XL +$5)




Marolina Outdoor Inc. was founded to bring deep-seated product expertise across all outdoor categories. Our innovative designs and technologically focused products create the foundation of our authentic outdoor apparel. Huk clothing represents a fresh take and a unique understanding of angling needs, offering functional styles that appeal to anglers of all ages. NOMAD is motivated to provide quality apparel so that hunters can maximize their experiences to hunt and provide sustenance regardless of the size of the game or where their pursuits lead them.

For more information, please visit WWW.HUKGEAR.COM

Posted in Apparel | Tagged , , | Comments Off on Huk’s New Capers Volley 5.5” Short Delivers Unmatched Performance and Comfort

Your next Kimber is almost here

At Kimber, we’re committed to meeting your needs with meticulous, purpose-driven solutions. It’s how we build the finest pistols and rifles in the world. And we’re about to bring that same intense focus on quality to what will be a new firearm platform from Kimber. Get ready for a new era in concealed carry.

YOUR OPINION SHOULDN’T BE CONCEALED
You carry a unique perspective. So we want to know: what do you demand in a concealed carry pistol? Choosing the right combination of capacity, size and caliber is the first decision, and the debate only gets more heated from there. Join the ongoing discussion on Facebook and tell us what matters to you. We’re listening.

POST YOUR THOUGHTS

Kimber Mfg (888) 243-4522 | Hours: M-F, 9 a.m.-7 p.m. Eastern
200 Industrial Blvd Troy, AL 36081


Posted in pistols | Tagged | Comments Off on Your next Kimber is almost here

Add Value For Customers By Visiting U.S. LawShield® at the 2021 NSSF Retailer-Range Expo

ADD VALUE FOR CUSTOMERS BY VISITING U.S. LAWSHIELD® AT THE 2021 NSSF RETAILER-RANGE EXPO

Houston, Texas – July 8, 2021 – U.S. LawShield®, industry leader and America’s largest provider of Legal Defense for Self Defense services, invites attendees of the 2021 NSSF® Range-Retailer Business Expo™ to visit them in booth 701. Hosted by the NSSF, the Expo is set for July 12-14 in West Palm Beach, FL, at the Palm Beach Convention Center. U.S. LawShield will be on-hand to network with range operators and firearm retail businesses and teach them the importance of protection from legal battles resulting from the lawful defensive use of firearms or other weapons.

According to P.J. Hermosa, CEO of U.S. LawShield, “The opportunity to support gun ranges and retailers on the front lines of the shooting industry is an honor for us, and we’re proud sponsors of this year’s NSSF® Range-Retailer Business Expo. U.S. LawShield is eager to share our knowledge with attendees, promote the industry, and safeguard our Second Amendment rights,” he said.

“With millions of new firearms owners across the United States coupled with all the law changes this past year, it’s important to arm them with knowledge of the consequences of the defensive use of their firearm. Imparting what you learn at the Expo adds value to your customers and positions you as a trusted partner in their journey of law-abiding gun ownership,” Hermosa added.

The Expo offers three days of high-quality education and networking opportunities, along with educational tracks that benefit both established firearm ranges and retail operators, as well as entrepreneurs focused on launching new ranges or FFL retail shops. “We enjoy the intimate climate of the Expo as it allows for face-to-face interaction with the folks who directly serve law-abiding American gun owners,” said Hermosa. “Whether you’re a vendor at the Expo, considering expanding your firearms industry business, or simply attending for the great networking, U.S. LawShield offers legal knowledge and unrivaled services that deliver protection if you or a member customer is involved in a lawful act of self-defense.”

U.S. LawShield will be available throughout the Expo to discuss and answer any questions regarding the Legal Defense for Self-Defense program, the U.S. LawShield Attorney Response 365™ 24/7/365 emergency hotline, where lawyers answer every call immediately, and a variety of other educational programs.

In addition, U.S. LawShield will host a dinner reception for partners and expo guests on Monday, July 12th at the West Palm Beach Hilton. The event will offer networking opportunities, updates from U.S. LawShield and featured speakers, including Shirley Watral from the DC Project.

For more information on U.S. LawShield and its legal defense for self-defense programs, visit the website at www.uslawshield.com.

About The National Shooting Sports Foundation

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations, and publishers nationwide. For more information, visit nssf.org.

About U.S. LawShieldfor Good™ by educating our 700,000 members and 6,000+ facility partners in self-defense law, empowering them to handle critical, life-threatening situations with confidence, protecting them from potential injustices in the legal system after acts of self-defense; and challenging the status quo regarding the affordability of legal defense. Our higher purpose is to create a united community of responsible individuals who believe in liberty and the inalienable right of self-defense.

Posted in NSSF/NRA | Tagged , , | Comments Off on Add Value For Customers By Visiting U.S. LawShield® at the 2021 NSSF Retailer-Range Expo

NEW Walker Medical Pouches are Here!

Whether you’re providing first aid to yourself or someone else we understand that it’s imperative to quickly access and easily identify everything in your kit. When you don’t have time to spare, the Vertx® Walker Medical Pouches keep your gear secure, organized and easily accessible.

Vertx

4545 Malsbary Road

Cincinnati, Oh 45242

Posted in Medical | Tagged , | Comments Off on NEW Walker Medical Pouches are Here!

The New Holosun HE507K-GR X2 with Green Reticle

City of Industry, Ca. (July 6, 2021) –Holosun is releasing several new models with their Super Green LED including the 507K series. Green reticles have some advantages of being an ultra-high contrast color in both daytime and low-light use. The brilliant green reticle of the HE507K-GR X2 enables the shooter to obtain a sight picture instantly against almost any backdrop or lighting conditions.

HE507K-GR X2 is an open reflex pistol optic designed primarily for concealed applications. The HE507K has become the go-to optic for concealed carriers and professional users on backup firearms. The HE507K features HOLOSUN’s Multi-reticle System (MRS) which gives the user an option to use the 32MOA/2MOA Circle-Dot reticle, Circle only, or Dot only. With up to 50,000-hour battery life (on setting 6), is the 507K goes far beyond the industry standard for a green reticle. It also has 12 brightness settings – 10 daytime and 2-night vision-compatible – for all-around use capabilities.

When carrying this optic, there is a wide range of features worth noting. Lock Mode is one such feature. It locks out the button functionality, preventing accidental setting changes if the optic is knocked into something. This, paired with the button redesign adds to the streamlined design which is perfect for concealed carry and backup firearm applications.

The HE507K is very compact measuring just 0.95” tall, 1.60” long, and 0.98” wide. Additional features include a side-mounted battery which enables the user to replace batteries without removing the optic which can require re-zeroing every time.

Overall, this newest addition to the Holosun lineup is worth a closer look and a few glances downrange.

Specs:

  • · 2 MOA Dot & 32 MOA Circle
  • · Light Wavelength of 540nm
  • · Green Reticle Color
  • · Parallax Free
  • · Unlimited Eye Relief
  • · 1x Magnification
  • · Multi-Coated Optical Glass
  • · CR1632 Battery
  • · 50,000 Hour Battery Life
  • · 10 DL&2 NV Brightness Settings
  • · Anodized 7075 T6 Aluminum Construction
  • · Window Size 0.58” x 0.77”
  • · Exterior Dimensions 1.60” x 0.98” x 0.95”
  • · 1 Oz. Weight
  • · IP67 Water Resistance

Holosun Technologies, Inc., located in City of Industry, California, is committed to

creating innovative optic and laser/IR technologies that benefit a broad range of

shooting, hunting, law enforcement and professional needs. Using the quality

manufacturing standards demanded by some of the best-known optics brands in the

world, with a wide range of affordable options, Holosun is at the forefront of

development of new sight technologies. Key innovations include Shake Awake

TechnologyTM, 50,000-hour battery life, Solar FailSafeTM, Multiple Reticle SystemTM

(MRS), Super Green LED, and IR/Laser units that utilize the most recent advancements

in laser and LED technology. At Holosun, we pride ourselves on providing cutting-edge

equipment at a competitive price that astounds the competition and the end-user.

For more information, please visit www.holosun.com

Posted in sights | Tagged , , | Comments Off on The New Holosun HE507K-GR X2 with Green Reticle

SHOOTING SPORTS: New In-Ear Electronics

In-Ear Electronic Hearing Protection Done Right

Howard Leight introduces two NEW Impact Sport In-Ear electronic hearing protection options

WESTWOOD, Mass. (July 7, 2021) – As hunters and shooting sports enthusiasts, we need to protect our ears while taking part in the activities we love, because regardless of what, where or how we shoot, each of us has a life away from the sport that requires good hearing to live fully.

Howard LeightTM recognizes this. The brand’s nearly 30 years of service to the shooting sports industry and its passionate customers can be attributed to many factors, but has largely been driven by continual research and unrelenting technological innovation. With over 160 patents issued to date and dozens more pending, Howard Leight has a proven track record of delivering trusted safety products that perform.

According to John Jenkins, Senior Manager Quality Engineering – Howard Leight, quality and technology continue to drive Howard Leight’s future. “We pride ourselves on the quality of our products and the technology we have pioneered over the years,” he says. “But despite the longevity our products enjoy, we’re not relenting. Ongoing research, development and innovation will continue as hallmarks of the Howard Leight brand. We pledge to offer new technologies and styles in both hearing and eye protection, but regardless of what our line looks like, it will always be comprised of well-designed, reliable, stylish, long-lasting products. That’s what we’ve done consistently, and it’s what our customers expect.”

This legacy and promise are exemplified in two all-new models of in-ear electronic hearing protection for shooting sports enthusiasts in 2021. Howard Leight ImpactTM Sport In-Ear – Hear-Through Protection with Amplification and Howard Leight Impact Sport In-Ear – Hear-Through Protection with Bluetooth® are in-ear electronic hearing protection done right, offering a superior combination of features at prices any hunter or shooter can afford. Both feature a high Noise Reduction Rating (NRR) of 29dB, a rechargeable 200 mAh lithium battery, hear-through volume control, automatic attenuation of dangerous sounds over 85dB, a highly comfortable fit, and great retail prices of just $120 and $165, respectively.

Impact Sport In-Ear – Hear-Through Protection with Amplification

NEW Howard Leight Impact Sport In-Ear – Hear-Through Protection with Amplification in stealthy olive drab green is designed for hunters and shooting sports participants who want comfortable, lightweight, high-NRR in-ear hearing protection that still allows them to easily hear –even amplify – what’s going on around them, but don’t want or need Bluetooth connectivity.

Featuring a highly-competitive NRR of 29dB, Impact Sport In-Ear – Hear-Through Protection with Amplification defaults to a safe 85dB sound level when powered on. This allows natural hearing of ambient sounds below 85dB, including conversation, range commands and crucial environmental sounds while hunting. Howard Leight technology inside attenuates gunfire and all other dangerous sounds over 85dB automatically on this default setting. Howard Leight Hear-through Enhancement technology provides an additional eight, progressively louder volume increments to optimize hearing of ambient sounds in any environment while providing up to 6X sound enhancement override.

Impact Sport In-Ear – Hear-Through Protection with Amplification comes with three pairs of foam ear tips (small, medium and large) and flexible, moldable ear hooks for a customized and secure fit on any wearer. And forget about tiny, fiddly batteries that need to be replaced; Impact Sport In-Ear is powered by a rechargeable 200 mAh lithium battery that delivers up to 50 hours of run time on a full, two-hour charge. A USB-C charging port, charging cable and compact, thoughtfully designed carrying case complete the package. MSRP for Impact Sport In-Ear – Hear-Through Protection with Amplification is just $120.

Howard Leight Impact Sport In-Ear – Hear-Through Protection with Amplification Features

Noise Reduction Rating (NRR): 29dB
Separate Hear-Through volume control
Realistic, natural Hear-Through functions with analog circuitry
9mm dynamic range speaker
2x omni-direction in-ear microphones
Device actively listens and automatically stops amplification when loud impulse sounds exceed 85dB (when operated in power-on/default setting)
8 different volume override increments to optimize hearing in the field by providing up to 6X sound enhancement
Run time up to 50 working hours per charge
2-hour charging time
USB-C charging port and cable included
200 mAh lithium battery
Flexible, moldable ear hooks for all-day comfort
Convenient, compact carry case
3 pairs of foam ear tips (small, medium, large)
Stealthy, OD Green color
Item # R-02700 / UPC: 033552027003
MSRP $120

Impact Sport In-Ear – Hear-Through Protection with Bluetooth

NEW Howard Leight Impact Sport In-Ear – Hear-Through Protection with Bluetooth is designed for hunters and shooting sports participants who want comfortable, lightweight, high-NRR in-ear hearing protection that still allows them to easily hear –even amplify – what’s going on around them, with the additional advantages of wireless Bluetooth 5.0 connectivity.

Featuring a highly-competitive NRR of 29dB, Impact Sport In-Ear – Hear-Through Protection with Bluetooth has realistic Hear-Through Audio technology that allows wearers to easily conduct conversation, hear important commands on the range and detect crucial environmental sounds when hunting. The device activity listens and automatically stops amplification when loud impulse sounds such as those from a firearms discharge exceed 85dB.

Howard Leight Impact Sport In-Ear with Bluetooth’s remarkable wireless connectivity capability is driven by Bluetooth 5.0 technology – the latest version of the Bluetooth wireless communication standard. Bluetooth 5.0 allows wearers to connect wirelessly to their Bluetooth-enabled devices, such as smartphones, tablets, and computers over Bluetooth Low Energy, which means reduced power usage and longer battery life.

Easy-to-use Bluetooth controls are integrated right into the device, and there are separate volume controls for both Bluetooth audio and the ambient sound entering the earphones via the dual, external microphones. That means wearers can stream Bluetooth audio, while also being able to hear what’s going on around them; both adjustable audio signals are controlled independently.

Impact Sport In-Ear – Hear-Through Protection with Bluetooth comes with three pairs of foam ear tips (small, medium and large) and flexible, moldable ear hooks for a customized and secure fit on any wearer. And like its non-Bluetooth companion model, Howard Leight Impact Sport In-Ear with Bluetooth is powered by a rechargeable battery, eliminating the need to constantly seek and purchase tiny replacement batteries. Impact Sport In-Ear with Bluetooth’s 200 mAh lithium battery delivers up to 10 hours of run time on a full, two-hour charge. A USB-C charging port, charging cable and compact, thoughtfully designed carrying case complete the package. MSRP for Impact Sport In-Ear – Hear-Through Protection with Bluetooth is just $165.

Howard Leight Impact Sport In-Ear – Hear-Through Protection with Bluetooth Features

  • Noise Reduction Rating (NRR): 29dB
  • Individual and simultaneous Bluetooth® V.5.0 wireless connectivity
  • Individual Bluetooth button with volume control and separate Hear-through volume control
  • Realistic, natural Hear-through functions with analog circuitry
  • 9mm dynamic range speaker
  • 2x omni-direction in-ear microphones
  • Device actively listens and automatically stops amplification when loud impulse sounds exceed 85dB
  • Run time up to 10 working hours per charge
  • 2-hour charging time
  • USB-C charging port and cable included
  • 200 mAh lithium battery
  • Flexible, moldable ear hooks for all-day comfort
  • Convenient, compact carry case
  • 3 pairs of foam ear tips (small, medium, large)
  • Black color
  • Item # R-02701 / UPC: 033552027010
  • MSRP $165

“In-ear electronic hearing protection offers shooting sports enthusiasts and hunters several distinct advantages, including effective protection, helpful amplification, minimal weight and bulk, and an unencumbered cheek weld when shouldering a firearm,” says Jenkins. “Beyond those primary advantages, customers who investigate our all-new Impact Sport In-Ear devices will quickly discover what we believe is a superior and unique combination of features, performance and value. Our entire Howard Leight Shooting Sports team is incredibly proud to launch these exciting products.”

New Howard Leight Impact Sport In-Ear models are available right now at Howard Leight Shooting Sports dealers and online at howardleight.com.

ABOUT HONEYWELL HOWARD LEIGHT

Honeywell Safety Products empower individuals and families across the globe to enjoy more and worry less. Our high-quality hearing and eye protection help people to more safely enjoy the events and activities they love. Our broad selection of comfortable and stylish protective eyewear delivers safety without compromise, many of which meet ANSI high-impact standards and offer UVA/UVB protection. Building on over 30 years of innovation, we’re continually developing new designs, materials and technologies to enhance comfort and protection for industry trade professionals, recreational and competitive shooters, DIY homeowners, and all fans of live music and sporting events. Whatever your passion, trust Howard Leight to block out the noise so you can listen to what’s important, while staying safely focused on the big moments that matter. Learn more at howardleightshootingsports.com.

Posted in Hearing Protection | Tagged , , , , | Comments Off on SHOOTING SPORTS: New In-Ear Electronics

Mid-Evil Industries Attends LEO Focused Trade Shows

July 7, 2021

(San Diego, CA) – Mid-Evil Industries, creator of innovative firearms accessories, is actively attending law enforcement focused trade shows this summer. In the month of June, Mid-Evil Industries attended both the 2021 NSA Conference & Exhibition and the 2021 TPA Annual Training Conference with Texas-based distributor TX-Tactical.
The NSA, or National Sheriffs Association, Conference was held in Phoenix, AZ from June 22-24. Exhibitors at this conference display a variety of products and equipment for sheriffs’ departments duties such as law enforcement, security, prisoner transport, jail/prison operations, and more. For more information about the NSA Conference & Exhibition, visit
NSAConference.org.
The Texas Police Association, or TPA, Annual Training Conference was held in Bryan-College Station, TX from June 28-30. The Texas Police Association, a non-profit organization, joined local law enforcement agencies from all over Texas to share in training and exhibitions. The TPA is “dedicated to advancing professionalism in law enforcement through training and ethics.” This event offers advanced training and classes to attendees and provides an opportunity for vendors to display products, equipment and services relevant to LEO agencies. For more information on the TPA and conference, visit
TexasPoliceAssociation.com.
“We are thrilled to be able to meet our law enforcement customer base in a face-to-face setting,” says Steve Azhocar of Mid-Evil Industries. “These trade shows provided a great opportunity for us to connect with the officers and departments who will be putting our products to use and see how we can help outfit them with the products they need. We are grateful to TX-Tactical for inviting us to join their booths, and we’re looking forward to the next show already.”
Pictured below are photos from the trade shows. In the first photo, Sarah Smith of TX-Tactical poses with an AR15 outfitted with the TRAMS system on one of the many different configurations available with the Overwatch Commander. This photo shows the QD Tripod mounted on another QD Tripod with Leg Extensions and Center Stabilizer. Modular parts allow the consumer to mix and match to fit their specific needs. The second photo shows an officer from the Maricopa County Sheriff’s Office trying out the Overwatch Commander with ARG and VFG grips.



For more information about Mid-Evil Industries, visit
www.mid-evil.com.


About Mid-Evil Industries:
Mid-Evil Industries is committed to providing gun enthusiasts with high quality, precision engineered weapon accessories. All our products are designed, developed and manufactured with first-rate materials for strength and endurance.


Posted in Accessories | Tagged , , , , , | Comments Off on Mid-Evil Industries Attends LEO Focused Trade Shows

Demo MDR rifles for sale

Available to ship today

We have a few demo rifles that are available for purchase. Act fast, there are currently only 10 available.

These are used MDR rifles that have been utilized for testing and development projects. They are not MDRX’s, but they are in great shape, and still have the Desert Tech Lifetime warranty.

Available MDR’s:

Both colors

223 and 308

Sign up to be contacted and reserve yours today!

Click Here To Request Purchase

And if you are looking for a red dot to install on your new MDR, here are some great options that are in stock and can ship with your rifle.

Go to Deserttech.com to take the next step in your Shooting evolution.

Desert Tech | 801.975.7272 | sales@deserttech.com  | deserttech.com

Posted in Promotions, Weapon systems | Tagged , , , | Comments Off on Demo MDR rifles for sale

Premier Body Armor Announces the New Concealable Armor Vest—Level IIIA

Vests_Concealable_Black_Front-Angle_1200x_jpg

Premier Body Armor Announces the New Concealable Armor Vest—Level IIIA

GASTONIA, N.C. – July 07, 2021 – Premier Body Armor is pleased to announce the new Concealable Armor Vest. This new covert Level IIIA vest provides robust protection in a platform that is comfortable enough to be worn all day.

“Our new Concealable Armor Vest provides excellent protection in a package that is easy to conceal,” said Jason Mammano, Vice President of Marketing and Communications at Premier Body Armor. “The Concealable Armor Vest is form fitting and cuts the bulk thin enough to disappear under a shirt. And with both Level IIIA and special threat protection, this is a great option for those who want the security provided by armor without calling attention to the one wearing it.”

The Concealable Armor Vest is designed disappear under a button-down shirt. Even its zippers have been concealed to prevent the armor from printing. Yet the vest is stylish enough to be worn as an outermost layer. The Concealable Armor Vest’s interior is finished with comfort tech fabric that is soft to the touch but is also breathable and antimicrobial.

Premier Body Armor’s new Concealable Armor Vest will stop common handgun rounds such as 9mm, .40 S&W, .45 ACP, and .44 magnum. In addition, the vest has been special threat tested and withstands 12 gauge (buckshot and slug), Liberty Civil Defense 9mm and FN 5.7×28 (SS197SR).

The Concealable Armor Vest is made in the USA and is available in sizes from Small to 2XL.


Features:

  • Water Repellant
  • Concealed zippers provide access to the  NIJ Certified Level IIIA ballistic panels in the front and back
  • A moisture management system that includes a wicking antimicrobial liner
  • Internal plate pocket that accommodates a 5”x8” IIIA trauma insert (included)
  • 6 point adjustability.  Two at the shoulder and two removable 6”x12” elastic straps that can be adjust on the front and back
  • Low Profile VELCRO ® Brand hook & loop (50% thinner than traditional hook & loop)
  • The outer carrier is Machine Washable 

About Premier Body Armor

Premier Body Armor was founded in 2013 with the goal of protecting and empowering Law Enforcement and law-abiding citizens with innovative armor solutions, Made in the USA. Built on the backbone of over 20 years of armoring experience for customers such as the United States Special Operations Command (USSOCOM), the United States Marine Corps (USMC), PBA is innovating and changing the way body armor is both perceived and utilized. Bulletproof backpack inserts, ultra-discreet vests, and more have made body armor more practical for daily use than ever before. With partnerships across industries, powerful community engagement, and top-notch customer service, Premier Body Armor is one of the top body armor manufacturers in the USA.

Premier Body Armor, 1552 Union Rd., Suite E, Gastonia, North Carolina 28054, United States

Posted in Ballistic Protection | Tagged , , | Comments Off on Premier Body Armor Announces the New Concealable Armor Vest—Level IIIA

Register Now for 2021 SOFIC On-Demand

2021 SOFIC

Were you unable to attend the 2021 Special Operations Forces Industry Conference? Don’t worry! We have you covered.

From now until September 3, 2021, you can gain access to all the releasable presentations from 2021 SOFIC for a discounted fee. After registering, you will be able to watch the speaker presentations at your convenience as well as access the related handouts.

Already Registered?
For attendees who already registered, simply log back into the
2021 SOFIC virtual platform and navigate to the “On Demand” tab on the left-hand side.

Register

Accessing these presentations from 2021 SOFIC means that you will be able to gain insights from U.S. Special Operations Command leadership—including Commanding General Richard D. Clarke, USA, and Acquisition Executive Mr. James H. Smith—and thought leaders like our industry keynote speakers, Gayle Tzemach Lemmon and Satya Nadella.

By exploring the 2021 SOFIC presentations from the comfort of your own home, you are sure to stay connected with the SOF community and obtain a better understanding of USSOCOM’s present and emerging capability gaps and needs.

Enjoy these on-demand presentations about “Expanding the Competitive Space” while they are available. And, plan ahead now to join us next year for 2022 SOFIC in Tampa, FL, from May 16 – 19!

Thank You to Our Registration Sponsor

L3HARRIS

Dates
Dates
May 17 – 21, 2021

National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201

Posted in NDIA | Tagged , | Comments Off on Register Now for 2021 SOFIC On-Demand

Streamlight Marks 13 Years Supporting Breast Cancer Research Foundation


STREAMLIGHT® MARKS 13 YEARS SUPPORTING BREAST CANCER RESEARCH FOUNDATION

Company Donated $22K in 2020 for Breast Cancer Research

EAGLEVILLE, PA, July 7, 2021 – Streamlight® Inc., a leading provider of high-performance lighting equipment, donated $22,000 to the Breast Cancer Research Foundation® (BCRF), a not-for-profit organization seeking to prevent and cure breast cancer. According to 2021 BCRF estimates, a woman is diagnosed with breast cancer every two minutes. More than 43,000 women and 500 men will die from the disease this year. Because of research conducted by organizations like BCRF, deaths from breast cancer have decreased by 41% since 1989.

Each year, Streamlight donates the proceeds from sales of the pink Nano Light® key chain light, the pink Siege® AA ultra-compact lantern, and the pink Strion® LED tactical light. For each of the lights, Streamlight donates $1.00, $2.00, and $5.00, respectively.

“Our commitment to BCRF is steadfast, as we count a number of Streamlight employees among those who are breast cancer survivors,” said Streamlight Vice President, Sales and Marketing, Michael F. Dineen. “Streamlight is proud to support BCRF, which is the highest-rated breast cancer charity in the United States.”

In 2008, the company’s management team decided to create a line of pink flashlights and donate the proceeds to BCRF. Given the tight-knit company culture, the team wanted to contribute in some way to finding new treatments for the disease.

To learn more about Streamlight’s pink products and other Lights for a Cause, please click here.

About BCRF

The Breast Cancer Research Foundation (BCRF) advances the world’s most promising research to eradicate breast cancer. Founded by Evelyn H. Lauder in 1993, BCRF has raised more than $500 million to fuel discoveries in tumor biology, genetics, prevention, treatment, survivorship and metastasis making it one of the largest non-governmental funders of breast cancer research in the world. For more information about BCRF, visit www.bcrf.org.

About Streamlight

Based in Eagleville, PA, Streamlight, Inc. has more than 45 years of experience making tough, durable, long-lasting flashlights designed to serve the specialized needs of professionals and consumers alike. Since 1973, the company has designed, manufactured and marketed high-performance flashlights, and today offers a broad array of lights, lanterns, weapon light/laser sighting devices, and scene lighting solutions for professional law enforcement, military, firefighting, industrial, automotive, and outdoor applications. Streamlight is an ISO 9001:2015 certified company. For additional information, please call 800-523-7488, visit streamlight.com

Posted in Benefits, Tactical Lighting | Tagged , , | Comments Off on Streamlight Marks 13 Years Supporting Breast Cancer Research Foundation

DESIGNED BY YOU. MADE BY US.

RESCUE TACTICAL EVERYDAY CARRY SURVIVAL OUTDOOR HUNTING CUTLERY


Benchmade Knife Company.
300 Beavercreek Rd. Oregon City, OR 97045
Contact Us: 1-833-557-2526

Posted in Knives and Tools | Tagged , , , | Comments Off on DESIGNED BY YOU. MADE BY US.

NSSF Hitting Airwaves to Urge “NO” Vote on David Chipman for ATF

For immediate release | July 7, 2021

NEWTOWN, Conn. — The National Shooting Sports Foundation® (NSSF®) is making its first-ever television commercial debut in a spot that is urging U.S. senators to oppose President Joe Biden’s nomination of David Chipman for director of the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF).

The television ad spots will appear in West Virginia and Maine.

“This is monumental for NSSF and it speaks to the importance the firearm industry places on protecting the 342,330 jobs and $63.5 billion economic impact this industry provides,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “David Chipman’s nomination is clearly a move to politicize the ATF. Voters in key states reject his nomination and those senators have been advised of those polls by NSSF. We are now taking our opposition to the public to remind their senators that Chipman’s nomination is a threat to jobs, revenue and not the least – the ability of law-abiding citizens to exercise their God-given Second Amendment rights.”

Chipman is a paid gun control lobbyist who works for Giffords gun control group and has advised antigun billionaire Michael Bloomberg’s gun control group Everytown for Gun Safety. He testified before the U.S. Senate Judiciary Committee that he would ban the most popular-selling semiautomatic centerfire rifle in America – the AR-15 – with over 20 million already in circulation, despite his inability to define it as what he terms an “assault weapon.” Chipman proposed to Congress that the ATF abuse its authority by punishing gun owners with a penalizing mandatory tax, registration, fingerprints and photo submission and notification of chief law enforcement officers. He also told senators that law-abiding gun owners are criminals in waiting and advocated they be arrested for “pre-crimes.”

Chipman’s hostility for gun owners is well-documented. He ridiculed the over 8.4 million first-time gun buyers in 2020, comparing them to “Tiger King” and mocked new gun owners by encouraging them to empty their guns and, “Hide it behind the cans of tuna and beef jerky that you’ve stored in the cabinet and only bring that out if the zombies start to appear.”

Chipman is unqualified and unworthy of a position of law enforcement authority.

View NSSF’s television ad here.

About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

Posted in NSSF/NRA | Tagged , , , | Comments Off on NSSF Hitting Airwaves to Urge “NO” Vote on David Chipman for ATF

Cimarron Firearms Celebrates “American Handgunner” 45 years with Exclusive Engraved Frontier .45LC.

Cimarron Firearms Celebrates “American Handgunner” 45 years with Exclusive Engraved Frontier .45LC.

The Cimarron Firearms Frontier .45LC beautifully engraved by Baron Technology with hand-tooled DeSantis leather holster is on the September/October 45th anniversary issue of American Handgunner magazine. The one-of-a-kind revolver and holster are part of the monthly giveaway for fans of the iconic firearms publication.

Fredericksburg, Texas (July 2021) – Cimarron Firearms, recognized as the leader in quality and authenticity in Old West replica firearms, is honored to help celebrate one of the firearms industry’s most trusted and oldest firearms magazines, American Handgunner, a bi-monthly magazine from FMG Publications.

American Handgunner, founded in 1976, celebrates 45 years of new handguns and handgun history. On the Anniversary issue cover, Cimarron Firearms Frontier .45 LC with a 4 ¾-inch barrel has been beautifully hand-engraved by one of Baron Technology’s master engravers using selective 24kt gold plating. The special anniversary edition SA Frontier is a one-of-a-kind revolver with finely figured Maple grips and comes with a leather tooled holster from premier holster maker, DeSantis Gunhide.

“No better firearm to convey our proud American firearms history than a Frontier revolver,” Mike Harvey, founder and CEO of Cimarron Firearms, said. “Congratulations to American Handgunner and their staff of dedicated writers and editors.”

“We were so proud to be invited to partner with Cimarron on this project,” remarked David Miles, president of Baron Engraving. “This special gun is a great example of our capabilities and a reflection of the efforts of so many members of our team. From the custom polishing, finishing, bluing, and selective gold plating, to the beautifully executed hand engraving by Heidi Roos, we couldn’t imagine a better way to celebrate 45 years of American Handgunner magazine. We hope the winner of this revolver enjoys it as much as we enjoyed making it shine.”

The September/October 45th anniversary issue of American Handgunner will also feature the Cimarron Firearms SA engraved Frontier revolver as part of their monthly giveaway package. One lucky winner will walk away with a unique pistol package.

For more information on Cimarron Firearms and accessories, visit www.cimarron-firearms.com.

About Cimarron Firearms:

Cimarron is the leader in quality and authenticity in replica firearms. For the past 30 years, Cimarron has worked continuously to perfect the authentic detail, fit, finish, and function of our line of frontier firearms. There is no other firearm that is near equal in value, strength, reliability, and authentic detail as is the line from Cimarron Firearms Co. 


About Baron Engraving:

Baron Engraving is the premiere custom engraving and finishing company for the firearms industry. For nearly 40 years Baron Artisans have blended old-world craftsmanship with leading engraving technologies to transform ordinary surfaces into distinguished works of art. Find out more at Baron Engraving www.BaronEngraving.com.

About American Handgunner:

American Handgunner was introduced in 1976 as the first magazine devoted entirely to handguns.

Just like a classic, it improves with age. Today it’s still the first place handgunners everywhere turn for the latest and most reliable handgun news and information.

From custom handguns, new factory models, competition, pistolsmithing, handloading and more, each issue continues to deliver the goods while staying on top of the rapidly changing world of handgunning. What’s the best home-defense gun for you? Is a laser sight worth the investment? American Handgunner can help you decide.

The print version of American Handgunner is published six times per year by FMG Publications. www.AmericanHandgunner.com

FOLLOW US

Facebook‌ Instagram‌ YouTube‌ Twitter‌

Posted in Western | Tagged , , , | Comments Off on Cimarron Firearms Celebrates “American Handgunner” 45 years with Exclusive Engraved Frontier .45LC.

Gunfighter Canyon Ranges Earn NSSF Five-Star Rating

For immediate release | July 7, 2021

Gun Fighter Canyon

NEWTOWN, Conn. – NSSF®, the firearm industry trade association, is pleased to announce that Gunfighter Canyon has been awarded its Five-Star rating, NSSF’s highest designation for range excellence. The Five-Star rating applies to Gunfighter Canyon’s facilities in both Page and Williams, Arizona.

“We are very impressed with the Gunfighter Canyon’s facilities and operations,” said Zach Snow, NSSF Director, Retail & Range Business Development. “We can see why their customers, especially those visiting the state and looking to have a fun, safe time with firearms, come away satisfied and with an experience to remember.”

Founded in 2017, Gunfighter Canyon is a veteran-owned and operated business. That in just several years Gunfighter Canyon has reached the pinnacle of NSSF’s range-rating ranking is a testament to the professionalism and attention to detail from management and staff.

At each location, Gunfighter Canyon attracts a diverse range of local and out-of-state customers to its combination range and firearm retailer facilities. Its business model is heavily focused on creating experiences for their patrons, especially since their facilities attract tourists visiting the Grand Canyon State from throughout the country and even internationally.

Both locations offer indoor ranges, and the Page facility, which is near tourist destinations Lake Powell and Antelope Canyon, offers special outdoor shooting adventures, including providing transportation and equipment.

Gunfighter Canyon puts out the welcome mat for everyone—from first-time shooters to seasoned gun owners. The ranges can accommodate normal handgun, rifle and shotgun shooting, of course, but the fun really begins when customers looking for a new experience opt to shoot fully automatic machine guns or, for those wanting to channel their inner cowboy or cowgirl, “Wild West” revolvers.

“Having our Page and Williams facilities recognized with Five-Star ratings by NSSF is a mark of achievement we’re very proud to receive,” said Nishan Campbell, Co-Founder and CEO. “These ratings and our recent expansions to meet customer growth mean we’re succeeding in what we set out to do four years ago— provide a ‘once-in-a-lifetime’ shooting experience to a customer who might not otherwise be exposed to the 2nd Amendment rights our great country offers and employing our nation’s veteran community. We are grateful for the NSSF’s leadership in our industry and for highlighting the tireless work of our Gunfighter staff. We are honored to receive this recognition.”

Gunfighter Canyon emphasizes safety and education and offers various training classes, including private training provided by instructors certified by the NRA, USCCA and various military backgrounds. With so many first-time gun owners seeking to become better target shooters or learn more about concealed carry, Gunfighter Canyon’s training classes are popular.

The on-site gun stores in both locations offer new and used firearms, plenty of ammunition and accessories. A full-time, on-site master gunsmith can assist customers with repairs and customizations of their guns, and the “Gunfigher Laboratory” specializes in Gunfighter-branded firearms, Cerakoting, stippling and laser engraving.

For regular customers, Gunfighter Canyon offers a range of memberships so patrons can get the most value from the ranges.

Like the nearby Grand Canyon, which always gets the highest ratings in guide books, Gunfighter Canyon can boast the same recognition from NSSF’s Range Rating Program.

About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearms retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

About NSSF’s Star Rating System

To achieve a 4- or 5-star rating, ranges must demonstrate excellence in all aspects of management and operations. Ranges that earn a rating are prominently featured on NSSF’s Find a Range resource at letsgoshooting.org, wheretoshoot.org and on the WhereToShoot mobile app. Does your shooting range have what it takes? Learn more about the program criteria and apply today to join the family of Star-Rated Ranges.

Posted in NSSF/NRA | Tagged , , | Comments Off on Gunfighter Canyon Ranges Earn NSSF Five-Star Rating

Shell Shock Technologies Sponsored Shooter John Vlieger Takes Home High Overall at Doc Welt 9th Annual Memorial Match

Vlieger also took home first place in the Open Division, finishing with 805.8760 match points and a time of 101.70.

Shell Shock Technologies Sponsored Shooter John Vlieger Takes Home High Overall at Doc Welt 9th Annual Memorial Match

Vlieger also took home first place in the Open Division, finishing with 805.8760 match points and a time of 101.70.

Westport, Conn. (July 2021) – Shell Shock Technologies, LLC., an early-stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry, is pleased to announce its sponsored shooter, John Vlieger, won High Overall and First Place in the Open Division at the Doc Welt 9th Annual Memorial Match, held June 26, 2021, in Clearwater, Florida. Vlieger competed against 145 competitors to finish with 805.8760 match points and a time of 101.70.

“The Doc Welt match is held in memory of Gary “Doc” Welt, and to honor his service to our country. Physically challenging courses are the norm for this obstacle-heavy match, and I’m happy to bring home the win. Even if my physical fitness is in question, my gear is not. My competition pistol fed with Shell Shock Technologies NAS3 cases functioned flawlessly through the sand, heat, and mud. Some victories mean more than others, and this match was a shining example of one that matters,” commented Vlieger.

Vlieger has fired over 100,000 rounds of ammunition with Shell Shock Technologies’ NAS3 cases since becoming sponsored in 2017 and plans to continue using it. He can be seen competing next at the 2021 Berry’s Area 1 Championship, to be held Aug. 4, 2021, by the Paul Bunyan Rifle & Sportsmen’s Club in Puyallup, Washington.

About Shell Shock Technologies NAS3 Cases:

NAS3 9mm cases are 50 percent lighter than brass cases, offer greater lubricity and will not abrade, clog, foul, wear-out, or damage breach and ejector mechanisms. The cases offer greater corrosion resistance, tensile strength (2x stronger) and elasticity than brass. NAS3 cases will not split, chip, crack or grow (stretch) and are fully reloadable (using S3 Reload dies) and can be reloaded many more times than brass cases. NAS3 cases have been tested successfully by customers to pressures over 70k psi. NAS3 cases can be picked up with a magnet. The head can be colored for branding purposes and easy load identification.

NAS3 is “Best in Class” for maintaining consistent velocity between rounds. In an independent test performed by H.P. White Laboratory (a major munitions testing facility), rounds fired using NAS3 cases achieved a velocity standard deviation of 0.093 FPS (124-grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3fps).

To learn more about Shell Shock’s revolutionary technology, visit www.shellshocktech.com.

About Shell Shock Technologies, LLC:

Founded in Westport, Connecticut, in 2015, Shell Shock Technologies, LLC is an early stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry. Shell Shock is a component manufacturer supplying shell cases to the shooting sports market, as well as to U.S. and foreign ammunition manufacturers, law enforcement, military and other government agencies. Shell Shock does not load ammunition. www.shellshocktech.com


About John Vlieger:

John Vlieger began seriously competing in action shooting sports in mid-2014 while serving with the US Army. Initially focused on Limited Division with iron sights, Vlieger found his calling in Open Division and has been pushing his limits ever since. Relocating to Lexington, KY in 2017, his efforts have redoubled to improve his skills and compete at the highest level. He has since completed over 100 state, regional, and national championship matches with tens of titles under his belt. Vlieger plans to compete in over 10 major events in 2021, culminating in the 2021 IPSC World Championship in Bangkok, Thailand.


Posted in Ammunition, competitions | Tagged , , | Comments Off on Shell Shock Technologies Sponsored Shooter John Vlieger Takes Home High Overall at Doc Welt 9th Annual Memorial Match

Bond Arms’ Backup – An Ultra-Compact, Feature-filled Personal Defense Pistol

Granbury, TX (July 6, 2021) – Bond Arms builds the smallest, most powerful personal protection pistols in the firearms industry. The Texas gun maker loaded the Backup, its powerful yet ultra-compact derringer, with concealability and personal defense features that have quickly made it one of the company’s best-selling models.

There are many reasons why the Backup is the perfect choice for a secondary weapon. The Backup weighs only 19-ounces and is a mere 4.5-inches long—ideal for all-day carrying comfort. Its 2.5-inch barrels shortens the overall length for ultra-concealability.

Bond Arms listened to their customers’ request for a concealed carry gun that doesn’t draw attention. To accomplish this, they first bead-blasted all exposed stainless parts, including the barrels, trigger, trigger guard, and hammer, creating a discrete matte finish. Next, they added a black crinkle powder coating on the frame, further muting the pistol’s appearance. Bond installed an upgraded black rubber grip that matches the frame, improves control, and indexes the gun perfectly in the shooter’s palm. Finally, Bond Arms topped the pistol with a durable and reliable front blade and a fixed rear sight for rapid target acquisition.  

The Backup is chambered for one of two popular cartridges—9mm and .45ACP—offering ammo compatibility between a primary weapon and the Backup; both cartridges have the stopping power necessary to neutralize a threat.

Like the other Bond Arms’ models, the Backup is compatible with dozens of Bond Arms’ optional barrels in different lengths and cartridges, so customers looking for a longer barrel or different cartridges, including the powerful .410 bore, can easily and quickly swap barrels. Adding a longer barrel transforms the Backup into a viable primary personal defense weapon.  

Bond Arms pioneered the modern double barrel handgun, and the Backup inherits the enhanced safety elements incorporated into all Bond Arms’ derringer models. Features like a patented rebounding and locking hammer, trigger guard, retracting firing pins, and cross-bolt safety. In addition, the Backup features a one-handed operation, the key to a fast, reliable double-barrel handgun.

Since its inception, the Bond Arm’s Backup has received much interest from customers looking for a secondary concealed carry gun. It’s the critical backup that’s ready when you need it!

Bond Arms Backup Features: 

  • · Stainless steel double-barrel and frame
  • · Compatible with all standard Bond Arms barrels
  • · Patented rebounding hammer
  • · Retracting firing pins
  • · Cross-bolt safety
  • · Spring-loaded, cammed locking lever
  • Bond Arms Backup Specifications:
  • · Cartridge: .45ACP or 9mm Luger
  • · Barrel Length: 2.5″
  • · Grip Material: Rubber
  • · Grip Size: Standard
  • · Sights: Front blade, fixed rear
  • · Length: 4.5″
  • · Weight: 19-ounces
  • · Trigger Guard
  • · Price: $540.00

BOND ARMS, INC. is located in Granbury, Texas and manufactures the award-winning Bond Arms Derringer – the finest in double barrel protection. Originally organized under the name Texas Armory, the company became incorporated as Bond Arms in 1995 with the idea that the Remington Model 95 over-under, single-action derringer could be converted from an Old West anachronism into a modern & reliable handgun. The barrel and frame were redesigned to safely fire modern calibers & the entire handgun is constructed entirely from stainless steel. This makes for a pistol that’s both strong and durable.

For more information, please visit WWW.BONDARMS.COM


Posted in pistols | Tagged , , | Comments Off on Bond Arms’ Backup – An Ultra-Compact, Feature-filled Personal Defense Pistol

FAA Levies $119K Against 9 Passengers for Alleged Unruly Behavior

FAA logo

Date: July 6, 2021

WASHINGTON – The U.S. Department of Transportation’s Federal Aviation Administration (FAA) released a new public service announcement and levied $119,000 in civil penalties against passengers for alleged violations of federal regulations as part of its Zero Tolerance efforts against unruly behavior.
As part of the FAA’s Zero Tolerance campaign, the
web video features children explaining how to behave on a plane and expressing their disgust about increased unruly passenger behavior.

Today’s cases propose civil penalties against nine passengers ranging from $7,500 to $21,500 for allegedly interfering with flight attendants who instructed passengers to obey cabin crew instructions and various federal regulations. The cases involve assaulting the flight crew and other passengers, drinking alcohol brought aboard the plane and refusing to wear facemasks.
Since Jan. 1, 2021, the FAA has received approximately 3,271 reports of unruly behavior by passengers, including about 2,475 reports of passengers refusing to comply with the federal facemask mandate. We have identified potential violations in 540 cases and have initiated enforcement action in 83 cases. During the same timeframe, the FAA has proposed more than $682,000 in fines against unruly passengers, including today’s cases.

The cases are as follows:

$21,500 against a passenger on a Dec. 27, 2020, Frontier Airlines flight from Nashville, Tenn., to Orlando, Fla. The FAA alleges the passenger drank alcohol that Frontier did not serve, which is against FAA regulations. He refused to comply with a flight attendant’s instruction to stop drinking the alcohol and wear a facemask. The FAA further alleges the passenger began fighting with the flight attendant and nearby passengers about the facemask policy. The flight attendant issued the passenger a “red card” for failing to comply with the facemask instructions, but he continued to argue with nearby passengers, ultimately striking the passenger next to him on the head. The flight attendant reseated him in another row, notified the captain of the disturbance, and requested law enforcement to meet him at the gate upon arrival.
$18,500 against a passenger on a Feb. 19, 2021, Republic Airlines flight from Indianapolis, Ind., to Philadelphia, Penn. The FAA alleges that flight attendants repeatedly told the passenger to wear her facemask properly prior to boarding and during the boarding process. The passenger and members of her travel party were also playing loud, obscene music and refusing to wear their masks during the preflight safety announcements. During a flight attendant’s cabin check, she instructed the passenger to wear her seatbelt and facemask. During taxi from the gate, the passenger threatened the passenger in front of her when they closed the window shade. A flight attendant again instructed the party to settle down and wear their facemasks, but they did not comply. They continued to play loud, obscene music and use obscene language against the flight attendants and other passengers. The crew notified the captain, and the plane returned to the gate for law enforcement to meet the passenger. When the captain left the cockpit to notify the passenger that she was being removed from the flight, she began to argue and use obscene language with the captain. As she stood up to leave the aircraft, she punched the female passenger who was seated in front of her, holding a small infant, in the back of the head.
$17,000 against a passenger on a Jan. 25, 2021, Frontier Airlines flight from St. Louis, Mo., to Las Vegas, Nev. The FAA alleges the passenger refused to wear his facemask during the boarding process despite direct instruction from flight attendants to do so. Furthermore, the flight attendant had to pause the preflight safety demonstration twice to tell him to hang up his phone, put it on airplane mode, and wear his mask. During the flight, a flight attendant instructed him a second time to wear his mask. During the final descent, the passenger unbuckled his seatbelt, stood up, and moved to a different seat closer to the front of the aircraft. He ignored crew instructions that it was unsafe to be unbuckled and move about the cabin at that time.
$13,000 against a passenger on a Jan. 29, 2021, Frontier Airlines flight from San Diego, Calif., to Las Vegas, Nev. The FAA alleges the passenger repeatedly removed her facemask and ignored crew instruction to wear it properly. The FAA further alleges that the passenger drank alcohol that Frontier didn’t serve, which is against FAA regulation.
$10,500 against a passenger on a Feb. 27, 2021, Allegiant Air flight from Provo, Utah, to Mesa, Ariz. The FAA alleges the passenger refused to wear his facemask over his mouth and nose throughout the flight. Flight attendants instructed him seven separate times to wear his facemask properly, and each time he moved it off of his nose after the flight attendant walked away. When told that he needed to cooperate and provide information to fill out a passenger disturbance report, he argued with the flight attendant, refused to provide his identification, said he would continue to pull his facemask down, and claimed that it was fine just over his mouth. After the plane landed, he approached a flight attendant from behind as she prepared to open the cabin door and touched her. He stated that she was being aggressive about the facemask policy and got very close to her while complaining about her enforcement of the policy. This behavior intimidated the flight attendant and caused her to cry. 
$10,500 against a passenger on a Jan. 23, 2021, Alaska Airlines flight from Seattle, Wash., to Ketchikan, Alaska. The FAA alleges that as the flight was preparing to depart from the gate, the passenger made a 911 call reporting that the aircraft was being hijacked. He told the 911 dispatcher that a man was holding up a flight attendant at knifepoint near the front of the aircraft and repeatedly asked the dispatcher to stop the flight. While the aircraft was taxiing to the runway, he left his seat twice to enter the lavatory despite flight attendant instructions to stay seated. Due to the 911 calls, the pilots taxied the aircraft to a cargo ramp where law enforcement met the flight. Law enforcement boarded the aircraft armed with rifles and evacuated passengers and crew. While at the cargo ramp, the passenger called the FBI and made mention of a bomb. The aircraft was temporarily taken out of service for bomb screening.  Law enforcement also screened all passengers and crew as a result of the passenger’s comments. All of the passenger’s claims were false and resulted in a multi-hour delay of the flight.
$10,500 against a passenger on a Dec. 19, 2020, Allegiant Air flight from Syracuse, N.Y., to Punta Gorda, Fla. The FAA alleges that while the fasten-seatbelt sign was on during a period of moderate turbulence, the passenger got out of his seat to use the lavatory. When flight attendants told him it was unsafe to do so, he argued that he was drinking at the airport for five hours prior to the flight. Flight attendants allowed him to use the lavatory, but upon exiting, he nearly fell on the flight attendants three times and argued with them about being allowed out of his seat. He was not wearing his facemask, and flight attendants reminded him to wear it several times. After flight attendants got him in his seat, he began vaping despite flight attendant instructions to stop. Throughout the rest of the flight he continued to vape, not wear his facemask, and get out of his seat. The captain called for law enforcement to meet the passenger at the gate.
$10,000 against a passenger on a Feb. 19, 2021, Republic Airlines flight from Indianapolis, Ind., to Philadelphia, Penn. The FAA alleges that during the boarding process, flight attendants twice asked the passenger to wear her facemask. The FAA further alleges that the passenger and her party refused to wear their facemasks, played loud music, and spoke loudly during the safety announcements. During the cabin check, a flight attendant asked her to buckle her seatbelt and wear her facemask, but she did not comply. The passenger continued to play loud, obscene music and used obscene language about the flight attendants and other passengers. Flight attendants notified the captain, who returned the flight to the gate, where law enforcement met the passenger. When the captain told the passenger that she and her party would be removed from the aircraft, she began arguing with the captain and used obscene language. This passenger was a member of the party mentioned in the second case listed in this release.
$7,500 against a passenger on a Feb. 25 2021, Southwest Airlines flight from Denver, Colo., to Los Angeles, Calif. The FAA alleges that upon boarding, flight attendants instructed the passenger twice to wear his facemask properly. He moved it below his nose and mouth both times. A Southwest Airlines customer service supervisor boarded the aircraft to speak with him about his non-compliance and provided him a facemask that would fit properly after he told flight attendants that his mask was broken. As the supervisor left, he again pulled his facemask below his nose and mouth. The supervisor returned and asked him to get off the aircraft, but the passenger refused. As a result, the airline had every passenger deplane. The non-compliant passenger was not allowed to reboard. His actions caused the flight to be delayed by 38 minutes.

The Centers for Disease Control and Prevention (CDC), the Transportation Security Administration (TSA), and the U.S. Department of Transportation (DOT) reminded the traveling public on May 14 that if you travel, you are still required to wear a mask on planes, buses, trains, and other forms of public transportation traveling into, within, or out of the United States. Masks are also required in U.S. transportation hubs such as airports and stations.
Federal law prohibits interfering with aircraft crew or physically assaulting or threatening to physically assault aircraft crew or anyone else on an aircraft. Passengers are subject to civil penalties for such misconduct, which can threaten the safety of the flight by disrupting or distracting cabin crew from their safety duties. Additionally, federal law provides for criminal fines and imprisonment of passengers who interfere with the performance of a crewmember’s duties by assaulting or intimidating that crewmember.
The FAA is strictly enforcing a
zero-tolerance policy toward passengers who cause disturbances on flights, fail to obey flight crew instructions in violation of the FAA’s regulations, or engage in conduct proscribed by federal law.
The passengers have 30 days after receiving the FAA’s enforcement letter to respond to the agency. The FAA does not identify individuals against whom it proposes civil penalties.

Posted in aviation, FAA | Tagged , , | Comments Off on FAA Levies $119K Against 9 Passengers for Alleged Unruly Behavior

Escort Shotgun’s Hard-Hitting SDX

Bentonville, AR (July 6, 2021) – The Escort SD-X is part of Hatsan’s Versatile Tactical Shotgun series.  Available in either 12 ga or .410 cal, this modern sporting shotgun is offered in all black or FDE Cerakote.  A new gas piston design is mounted around the barrel itself, eliminating the secondary tube that is typically mounted below the barrel of a semi-automatic shotgun.  This reduces the weight and bulk of the gun while minimizing felt recoil and muzzle rise. The synthetic polymer lower receiver features an alloy magazine well that ensures a smooth, durable product designed to last.  Hatsan’s patented ThermoDefend forend absorbs and dissipates heat from the barrel while offering a comfortable, controlled grip on the weapon.

An active buffer tube absorbs recoil and sports a removable buttstock with elevation-adjustable cheek rest.  The soft rubber ergonomic pistol grip is also removable and can be replaced with a wide variety of already available aftermarket options.  The cocking bolt is reversible to suit a wide variety of shooter preferences. A carry-handle rear sight and fixed front sight come equipped on each gun, but the included flip-up sights can be installed for use with mounted optics.  The forend also features 4 Picatinny rail locations to accommodate multiple accessory mounting options.

The 12-gauge models feature an 18″ barrel with removable chokes, including an extended cylinder bore choke brake that helps tame recoil with heavy shot or slugs.  Standard Full and Improved Cylinder chokes are also included, with other options available from HatsanUSA. Each gun ships with two 5-round magazines, and a 2-round magazine that can be stored in the buttstock.  The gun is chambered to accept both 2 ¾” and 3″ shells and will cycle them interchangeably with no external adjustments required by the shooter.

The .410 models feature a 20″ barrel with an integrated choke suitable for both shot and slugs.  Offering the same recoil-absorbing characteristics as the larger caliber models, this shotgun is extremely smooth.  Also shipping with two 5-round magazines, this gun features a spare 3-round magazine stored in the buttstock. The gas piston operates in the same manner, cycling both standard and magnum loads reliably.

As with all Escort shotguns, the barrels are proof tested at the factory to ensure quality and durability.  The hard chrome and/or Cerakote coatings are built to withstand the harshest conditions and look good while doing it. HatsanUSA offers a 5-year limited warranty with all Escort firearms.

SD-X Features:

  • · Modern sporting style gas-operated semi-automatic shotgun
  • · 12 ga or 410 cal, 3″ / 76mm chamber
  • · Self-regulating gas piston cycles both 2 3/4″ and 3″ shells
  • · Detachable box magazines
  • · Onboard storage for spare magazine
  • · 18″ or 20″ barrel for shot or slugs
  • · 12-gauge model features interchangeable choke tubes (F, IC, Cyl w/ Brake)
  • · Oxidation proof chrome plated steel barrel
  • · All barrels are proof tested at the factory to ensure maximum durability
  • · Reversible cocking handle for ambidextrous operation
  • · Buffer tube mounted stock with elevation adjustable cheek rest and soft rubber buttpad
  • · Soft rubber ergonomic pistol grip
  • · Durable alloy upper receiver and a light-yet-durable synthetic lower receiver
  • · Picatinny rail integrated into upper receiver and handguard
  • · Synthetic ThermoDefend handguard with ergonomic forend grip
  • · Manual safety selector switch
  • · Adjustable front and rear sights
  • · Detachable carry handle rear sight and front sight
  • · Optional flip-up front and rear sights included
  • · Mounted sling loops
  • · Tough matte black or FDE Cerakote finish
  • · MSRP: $619.99 – Black / $689.99 – FDE

SD-X12 Specifications:

  • · 12ga gas-operated, semi-automatic shotgun
  • · 18″ hard chrome plated barrel with removable chokes
  • · 37.6″ overall length
  • · 9.0 lbs.
  • · 2x 5-rd + 1x 2-rd magazines included
  • · F, IC, and CYL (brake) chokes included

SD-X410 Specifications:

  • · 410cal gas-operated, semi-automatic shotgun
  • · 20″ hard chrome plated fixed cylinder barrel
  • · 39.6″ overall length
  • · 7.8 lbs.
  • · 2x 5-rd + 1x 3-rd magazines included

HatsanUSA Inc., provides U.S. customers the opportunity to experience the exceptional quality, craftsmanship and hard-hitting performance of Escort Shotguns, Hatsan Airguns, H&N Pellets, TactAir Fill Solutions, and Optima Optics. 

For more information, please visit  WWW.ESCORTSHOTGUNSUSA.COM

‌

Posted in shotguns | Tagged , | Comments Off on Escort Shotgun’s Hard-Hitting SDX

NSSF to Challenge New York Public Nuisance Lawsuit Law

This law would allow civil lawsuits by municipalities against the firearm industry for the criminal actions by non-associated third parties.

July 6, 2021

NSSF to Challenge New York Public Nuisance Lawsuit Law

NEWTOWN, Conn. – The National Shooting Sports Foundation® (NSSF®) will challenge to overturn the law signed by New York Democratic Gov. Andrew Cuomo that would allow civil lawsuits by municipalities against the firearm industry for the criminal actions by non-associated third parties.

The law is in contravention to federal law, the Protection of Lawful Commerce in Arms Act (PLCAA), and the legal foundations of tort law.

“This law is unconstitutional, plain and simple. It is abhorrent that Governor Cuomo is rehashing a decades-old failed playbook that was rejected by courts in the 1990’s and early 2000’s,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “Governor Cuomo is, again, blameshifting for his administration’s failures to prevent crime by pointing fingers at firearm manufacturers that have been working with federal, state and local authorities for real solutions.® This law is based on the same legal understanding that would allow victims of drunk drivers to sue Ford and Budweiser for the criminal actions of an individual. This law is not legal accountability. It is political posturing.”

Gov. Cuomo signed the law after repeating the same debunked talking points churned out by President Joe Biden. Gov. Cuomo claimed the firearm industry is the only industry immune to lawsuits. That worn-out myth was discredited by The Washington Post and Fact Check.org. Politifact called them “False” in 2015 when failed presidential candidate Hillary Clinton attempted to pass along the debunked information.

Gov. Cuomo knows this history and the record of courts dismissing these lawsuits before PLCAA was passed with a broad bipartisan consensus in 2005. Gov. Cuomo, when serving as President Bill Clinton’s Secretary of Housing and Urban Development, got involved when he organized dozens of local housing authorities to bring their own lawsuits against gunmakers and threatened the industry with “death by a thousand cuts.”

This was his admission these lawsuits lacked legal foundation and amounted to harassment through litigation.

Legal Professor Victor Schwartz, who literally wrote the textbook on tort law, former law professor and law school dean and the current co-chairman of the Public Policy Group of the law firm Shook, Hardy & Bacon, recently authored an op-ed setting the record straight on PLCAA. He wrote, “The PLCAA remains a commonsense law that protects against unsound attempts to change radically a fundamental liability law principle.”

Jonathan Turley, the Shapiro Professor of Public Interest Law at George Washington University, wrote in The Hill of the PLCAA, “The bill saved the industry some litigation costs, but the industry would have prevailed in such actions anyway if they were tried. Product liability and tort actions against manufacturers have uniformly and correctly been rejected by the courts.”

To learn more of the history of PLCAA, what the law does and doesn’t do and other industries with similar protections, read NSSF’s Primer on Repealing PLCAA.

About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

Posted in NSSF/NRA | Tagged , , | Comments Off on NSSF to Challenge New York Public Nuisance Lawsuit Law

Stout FLK | A Sturdy EDC, Back in Stock

FREE STANDARD GROUND SHIPPING

KNIVES MULTI-TOOLS PACKS ILLUMINATION

Introducing Stout FLK

BACK IN STOCK

STOUT FLK

For those who want a small and sturdy EDC, Stout FLK is just the knife you need.

A collaboration between knife designer Mikkel Willumsen and SOG founder Spencer Frazer, Stout FLK easily fits in your pocket and opens with a kick.

Available in stonewash and green, or blackout, Stout FLK is a uniquely designed blade made for everyday challenges.

Limited availability, so get them now before inventory runs out!

SHOP NOW

Stout FLK Diagram

Stout FLK Specs

G10 and Stainless Steel HandleKick provides quick opening

CRYO D2 Steel
Stout Story

WHEN KNIFE DESIGNERS COLLIDE

How did the Stout FLK come together anyways? That’s what we explore in our latest story, where we interview knife designer Mikkel Willumsen and SOG founder Spencer Frazer. In this post they discuss the process of designing the Stout FLK, the challenges, and what they think about each other’s work.

READ THE WHOLE STORY

PROFESSIONAL

OUTDOOR

DAILY

Lifetime Warranty

Free Shipping

Mission Ready. Purpose Built

Engraving

Free shipping limited to the continental US.

Limited to stock on hand.

Online exclusive.

Mission-centric solutions designed to enhance capability, no matter the situation. Drawn from studying user insights, our systems confidently embrace adversity, turn obstacles into opportunities and push us in our relentless pursuit of greater potential.

SOG Knives and Tools
6521 212Th St Sw Lynnwood, WA 98036

Posted in Knives and Tools | Tagged , , | Comments Off on Stout FLK | A Sturdy EDC, Back in Stock

Galco’s Speed Master 2.0 Paddle/Belt Holster!

Header Logo

Galco’s Speed Master 2.0 Paddle/Belt Holster!

PHOENIX, July 2021
Whether you’re a fan of a certain fictional Wyoming sheriff or a gun carrier in search of a versatile and practical EDC holster, Galco’s
Speed Master 2.0™ is a great choice.
Featuring an open top design for speed, covered trigger for safety, and tension screw adjustment for security, the Speed Master 2.0 adds convenient on/off ability to the equation when set up as a paddle holster. As a bonus, the Speed Master 2.0 can also be configured as a solid and stable belt holster using the included belt slot attachment.
The Speed Master 2.0’s versatility derives from its included twin attachment methods – an adjustable belt slot and a paddle – that are quickly and easily interchangeable by the end user. A flat-headed screwdriver is the only tool needed to swap one attachment for the other, giving the gun carrier the choice of two carry methods: the convenient paddle design or the stable and traditional belt slot.
Available in black or tan for over 80 different guns, the Speed Master 2.0 is constructed of premium steerhide, and fits belts up to 1 3/4″.
See all Galco’s paddle holsters at
galcoholsters.com!



Dealer inquiries:
800-874-2526 
dealersales@galcoholsters.com

Galco International, LTD is the designer and manufacturer of Galco Holsters, the premier American-made brand of superb-quality holsters, belts and accessories. Encompassing law enforcement, military, defensive and sporting use, the Galco brand utilizes leather, nylon and Kydex to meet the demands of today’s consumers. Women’s holster handbags, tactical slings and hunting accessories round out the line. All Galco products are proudly handcrafted in the USA since 1969

Footer Logo


Footer Logo

Galco International | 2019 West Quail Avenue, Phoenix, AZ 85027

Posted in Holsters | Tagged , , , | Comments Off on Galco’s Speed Master 2.0 Paddle/Belt Holster!

ODU launches new connector series ODU AMC® Series T – three locking options in one connector for additional security


Mühldorf, July 5, 2021

Maria

Nicol Schindlbeck

Lisa Schwertlinger

Katharina Schimpfhauser
Graphic Designer
ODU GmbH & Co. KG
Tel.:
+49 8631 6156-1817

ODU launches new connector series

ODU AMC® Series T – three locking options in one connector for additional security

The “T” stands for 3-in-1 or the “Triple”. Three locking options fit on one connector or receptacle part: Push-Pull, Break-Away or Screw Lock. Additional security is provided by the built-in trapezoidal threaded locking.

The new ODU AMC® Series T connector is even more rugged, sealed, proven reliable and offers unlimited possibilities. Following the motto everything is possible, the customer chooses locking type, cable connection, size, insert and number of contacts.

Its strengths:

· high vibration resistance

· waterproof according to MIL standard 810

· Sealed mechanical area, thus completely protected against Water, dirt and dust

· Easy to handle and install

· Suitable for MIL backshell and MIL crimp contacts

The ODU AMC® Series T connectors are available in two sizes and are compatible with standard backshells.

The ODU AMC® Series T is suitable for use in military, security and communications applications. The connectors are field terminable. Thus they are time saving. Even the individual contacts can be replaced or repaired in the field. It couldn’t be simpler for the operators. In addition this connector offers protection against water, dirt and dust.

The new connector system is also suitable for civilian applications. Where “raw and rough forces” prevail, the ODU AMC® Series T is used. Heavy construction machinery and agricultural vehicles are also exposed to high impacts. Vehicle and machine operators work in the field, in the forest, off-road, and encounter situations where they have to reconnect or repair or adjust the connector. This is exactly the situation that requires reliable, durable material that is easy to handle. Vibration resistant, waterproof, with easy handling, both in repair and assembly.

The characteristics at a glance:

  • · high performance under vibration
  • · waterproof according to MIL standard 810
  • · high flexibility: 1 receptacle, 3 locking options
  • · based on the MIL 38999 standard
  • · crimp contacts according to MIL standard
  • · reverse gender
  • · high temperature range: -65°C up to +175°C
  • highly robust
  • · sealed locking area
  • · isolated mechanical area and one piece housing
  • · backshell opportunity
  • · smaller than competitive 38999 products
  • · optimized assembly process – quick & easy
  • · full mate indicator
  • · mechanical and coloured coding

https://www.odu-connectors.com/news/news/view/new-odu-amcr-t-series-3-locking-variants-in-one-connector/

ODU Group: global representation with perfect connections

The ODU Group is one of the world’s leading suppliers of connector systems, employing 2,300 people around the world. In addition to its company headquarters in Mühldorf am Inn (Germany), ODU also has an inter­national distribution network and production sites in Sibiu/Romania, Shanghai/China and Tijuana/Mexico. ODU combines all relevant areas of expertise and key technologies including design and development, machine tooling and special machine construction, injection, stamping, turning, surface technology, assembly and cable assembly. The ODU Group sells its products globally through its sales offices in China, Denmark, England, France, Germany, Hong Kong, Italy, Japan, Korea, Romania, Sweden and the US, as well as through numerous international sales partners. ODU connectors ensure a reliable transmission of power, signals, data and media for a variety of demanding applications inclu­ding medical technology, military, communications and security, automotive, industrial electronics, and testing & measurement.

Posted in Electronics | Tagged , | Comments Off on ODU launches new connector series ODU AMC® Series T – three locking options in one connector for additional security

Special Operations technology in the Maritime environment

20210704_152538

THE ADVANCED MARITIME TECHNOLOGIES

CALLED UPON BY GLOBAL SPECIAL OPERATIONS FORCES

Rigid Hull Inflatable Boats (RHIBs) are the platform of choice for Special Operations Forces (SOF) seeking to undertake an extensive list of mission sets in riverine, littoral and blue water environments. RHIBs are used to support the rapid insertion and extraction of small unit teams during maritime counter-terrorism, anti/counter-piracy and counter-narcotics operations around the World. To accomplish these tasks successfully, RHIBs require increasingly capable and integrated mission suites including various elements of command, control, communications, intelligence, surveillance, target acquisition and reconnaissance and key sensor payloads.

L3Harris’ WESCAM MX™-10MS Electro-Optical and infrared (EO/IR) sensor can quickly be integrated and operated on board RHIBs in any operational environment and is optimized to support the rising operational requirements of maritime SOF units. The WESCAM MX-10MS is ideal for use during undercover special operations, including special reconnaissance and offensive action. Examples include; covert surveillance ahead of beach landings or the identification of enemy positions ahead of a larger, conventional amphibious attack; as well as Combat Search and Rescue missions where sensor payloads on board RHIBs can be used to scan long distances for debris and survivors.

L3Harris’ maritime sensors have been the ‘eyes’ of maritime vessels for over 45 years and remain ideally positioned to support Special Operations Forces across the future operating environment.

Posted in Electronics, ISR, Thermal Imaging | Tagged , , , | Comments Off on Special Operations technology in the Maritime environment

Save on Top Selling SIG AIR Pistols, Red Dots + Targets

Celebrate Independence Day Weekend and save when you combine our top selling air pistols, the PROFORCE M18 Airsoft Pistol (6MM BB) and the P320-M17 Air Pistol (.177CAL) with the SIG AIR Reflex Sight. These combinations make it easy and affordable to practice tactical training as well as your draw, target acquisition and shooting accuracy in the comfort of you own backyard. Both pistols include full blowback metal slides, drop magazines, and can be field stripped just like their official U.S. Army M17 and M18 counterparts.

While supplies last.

PROFORCE M18 Airsoft Pistol Bundle

MSRP: $259.98

NOW: $204.98

YOU SAVE: $55

BUY NOW: PROFORCE M18 Airsoft Pistol Bundle

P320-M17 Air Pistol Bundle

MSRP: $209.98

NOW: $174.90

YOU SAVE: $35

BUY NOW: P320-M17 Air Pistol Bundle

ALSO ON SALE

SIG Airgun Reflex Target

The D. Verified Reviewer

★★★★★

“PERFECT FOR TEACHING”

WAS: $15.99

ON SALE: 12.99

BUY NOW

SIG Airgun Spinner Target

Marsen E. Verified Buyer

★★★★★

“I LOVE TO SEE THAT THING SPIN”

WAS: $15.99

ON SALE: 12.99

BUY NOW

The SIG MCX Canebrake .177 CAL air rifle keeps you on target longer with fewer reloads utilizing its 30-round SIG Rapid Pellet magazine. Based on the innovative designs of the SIG MCX Rattler Canebrake, this CO2 model is ideal for training and practice.

Robert C. Verified Reviewer

★★★★★

“AMAZING! ACCURACY IS FANTASTIC”

BUY NOW: MCX Canebrake Air Rifle

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Airsoft | Tagged , , , | Comments Off on Save on Top Selling SIG AIR Pistols, Red Dots + Targets

Two Weeks Remain to Submit an Abstract | 2021 Undersea Warfare Fall Conference

2021 Undersea Warfare Fall Conference

Present Your Abstract | July 16 Deadline

The National Defense Industrial Association’s (NDIA) Undersea Warfare Division invites authors of high-quality professional abstracts to submit their work for technical presentation at the 2021 Undersea Warfare Fall Conference, scheduled in-person for September 27 – 29, 2021, in Groton, CT. Each abstract must be UNCLASSIFIED and cleared for public release with unlimited distribution (Distribution A). Each abstract should fit into one of the following Technical Sessions:

Aviation Systems
Combat Systems & C4I
Mine Warfare
Undersea Sensors
Undersea Vehicles
Warfighter Performance

Individuals are required to submit a concise abstract of 5,000 characters or less by Friday, July 16. Authors will be notified whether their abstract has been accepted by July 30. For complete details on the abstract submission process, visit the event website or contact George Webster at gwebster@NDIA.org.

Info Submit

Sponsorship and Advertising Opportunities

Looking to gain visibility and increase your brand exposure in front of the Undersea Warfare community? Sponsorship opportunities coming soon. Contact Andrew Peters at apeters@NDIA.org to be notified once information is available.

For information on advertising opportunities, visit the event website.

Coronavirus (COVID-19) Information

The Undersea Warfare planning team continues to monitor the novel coronavirus (COVID-19) situation. Currently, the 2021 Undersea Warfare Fall Conference is scheduled to occur as published. The health and safety of our event participants, members, and partners remain our top priority. We are committed to following the guidelines and precautions as outlined by the CDC.

NDIA is fully prepared to adjust any and all plans if the situation changes. We are following—and will remain in compliance with—all city, state, and federal guidelines. If the direction from federal, state, or local official public health authorities changes, we will adhere to the new guidance, act upon it immediately, and update everyone. We are fully prepared to adjust our plans as needed.

The NDIA team recognizes the importance of convening the national security and defense communities to promote the best policies, practices, products, and technology for warfighters and others who ensure the safety and security of our nation. We thank you for your continued support and hope to see you soon.

For more information and updates from NDIA about COVID-19, please refer to the NDIA Coronavirus (COVID-19) Update Page.

More information about the event will follow, so please continue to visit the event website for updates.

Questions? Contact Meredith Mangas at mmangas@NDIA.org.

Dates

Dates

September 27 – 29, 2021

Location

Location
U.S. Naval Submarine Base New London
1 Crystal Lake Rd
Groton, CT 06340

Contact

Contact
Meredith Mangas
Associate Director, Meetings
(703) 247-9467
mmangas@NDIA.org

National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201

Posted in NDIA | Tagged , | Comments Off on Two Weeks Remain to Submit an Abstract | 2021 Undersea Warfare Fall Conference

Independence Day Specials, 2022 Courses and More

INDEPENDENCE DAY SAVINGS AT THE PRO SHOP

Come visit the SIG SAUER Pro Shop from July 2-3 and July 6-9 for Independence Day specials. This is valid for in-store purchases only.

Please note: the store is closed July 4-5.

Pro Shop Hours: Monday-Saturday 8am-7pm, Sunday 8am-6pm.

Contact proshopinfo@sigsauer.com for details.

2022 Course Schedule

Our Q1 and Q2 course schedule for next year has been added to the website! Click the link below for a full list of courses offerings and to sign up.

SEARCH COURSES

Posted in Training | Tagged , | Comments Off on Independence Day Specials, 2022 Courses and More

BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE

BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE
Easier to teach. Easier to learn. Easier to hunt.
Here’s a simpler way for hunting mentors and mentees to connect.

BARNEVELD, Wis. – Imagine you never started hunting … All those early mornings. All those moments you thought your heart would pound right out of your chest. Many people never get the chance to experience the woods waking up around them, or to cook their family meat they brought home from the field.
But you can help them discover hunting, and our friends at
Identical Draw are here to help: Introducing newhunter.org, a simpler way for hunting mentors and mentees to connect.

BECOME A MENTOR

Hang out your “Welcome Sign”
According to the team at Identical Draw, one of the most important ways hunters can become mentors is simply letting friends and family know they are open to mentoring, using resources like their Instagram bios and social media.
But for many people interested in hunting, the process of connecting with a mentor is far more challenging, and that’s what newhunter.org is trying to address. But before jumping in, it pays to get a little practice. “Just like hunting, mentors need experience to become more skilled and knowledgeable,” the Identical Draw team said, “Knowing what to say, how to react, and being there for a new hunter are all things that need to be learned.”
Share your hunting passion
Once you feel like you’re ready to mentor,
newhunter.org is the place to start. Offering new hunters the perfect way to ask questions, learn, and get into the field, the site is built to help make the connections that get new hunters going. The Identical Draw team said, “Here, new hunters and seasoned hunters can connect and join each other on a hunt. This is a free platform with the full intent of getting more new hunters outdoors, and reconnecting families with their hunting heritage.”
If you’re interested in becoming a hunting mentor, check out
this blog from Identical Draw to get started, then go to newhunter.org to connect with someone who needs your help to start hunting.
To see more from Vortex, visit
VortexOptics.com

About Vortex Optics: American owned, veteran-owned, Wisconsin-based Vortex Optics designs, engineers, produces, and distributes a complete line of premium sport optics, accessories, and apparel. Dedicated to providing unrivaled customer service and exceptional quality, Vortex® backs its products with the unconditional, transferrable, lifetime VIP Warranty. Built on over 30 years of experience in the optics industry, Vortex® has emerged as a leader in the optics market.

Vortex Optics

1 Vortex Dr

Barneveld, WI 53507-9412

Posted in Benefits, Optics | Tagged , | Comments Off on BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE

BAWIDAMANN SHENANIGANS 7.1.21 INDEPENDENCE DAY

2021 ALOHA PUA WOOBIE PRE-ORDER IS OPEN
+ FREE SHIPPING UNTIL 7.5.21

Just like the Original M1942 Frogskin Garments this Woobie is 2 sided.
There is a Jungle side and a Beach side. This is 2 blankets in one!
Put in you pre-order and save a few Bucks for a Labor Day Shipping window.
Its that time of year where we sit on top of the Woobies outside instead of laying under them while inside.  Enjoy the summer. Read a book, have a picnic.
Pick one of these multipurpose blankets up today.
More info/purchase:
CLICK HERE:

ALOHA PUA SHIRT FREE SHIPPING + WW2 ERA PIN
For Independence Day I am offering FREE SHIPPING and a Josh’s Flight Jacket WW2 Pin
as long as supplies last.
SHIRTS ARE IN! SIZE RESTOCK!
Shirts are IN! Sizes have been restocked!
HONU JUNGLE, HONU BEACH, AND HONU ATOLL
This is our third Aloha Shirt Design  “ALOHA PUA” print.
As always a limited number of pieces will be produced. Styling is inspired by the vintage Aloha shirts from the 70s with an updated fit. For 2021, Bawidamann reinterprets the M1942 Frog Skin Camo pattern using Plumeria and the majestic Honu turtle as his muse. Embedded within the print are symbols from the WW2 Pacific Theater: Samurai swords, B.A.R.s, Nambu pistols, Zippos, and grenades. Genuine coconut shell buttons.
More info/purchase:
CLICK HERE:

I ordered enough WW2 era reproduction Pins to include in everyone’s Aloha shirt Order while supplies last. There are several designs. ONE pin will be randomly thrown in with the order. These are not cheap. These are not easy to get. And they are really fun. Hand Made by Josh’s Flight Jackets out of Germany.
HOW ABOUT THAT!

ALOHA PUA PATTERN TXC HOLSTERS

GET READY THESE WILL LAUNCHING JULY 6TH
These Limited edition Holsters always add fun to your summer EDC loadout.
As always they will only be offered for a limited time.
 

TITANIUM ST MICHAEL PROTECTION PENDANTS
Bronze 2 tone pendants shown here.
PRAYER OF ST. MICHAEL THE ARCHANGEL
St. Michael the Archangel, defend us in battle. Be our protection against the wickedness and snares of the devil. May God rebuke him, we humbly pray; and do thou, O Prince of the Heavenly Hosts, cast into hell, Satan and all the evil spirits, who prowl about the world seeking the ruin of souls.
-Amen.
More info/purchase:
CLICK HERE:

Posted in Apparel | Tagged , , | Comments Off on BAWIDAMANN SHENANIGANS 7.1.21 INDEPENDENCE DAY

Wishing You A Safe And Happy Celebration!

Posted in Uncategorized | Tagged , | Comments Off on Wishing You A Safe And Happy Celebration!

Blackhawk Introduces Streamlight TLR-7A Flex and TLR1-HL Tactical Weapon Lights

BH_TLR_Light_Mounted(lowres) (002)

Blackhawk_Logo_Black_LG

Blackhawk® Introduces Streamlight®TLR-7A Flex® and TLR1-HL® Tactical Weapon Lights

VIRGINIA BEACH, Va. – June 30, 2021 – Blackhawk®, a leader in law enforcement and military equipment for over 20 years, has partnered with Streamlight® to deliver two tactical weapon lights, the TLR1-HL® and TLR-7A Flex®. Already popular among shooters, both Streamlight models are designed to fit several Blackhawk holsters, most notably the Blackhawk T-Series. In addition, the TLR1-HL is compatible with the Blackhawk Omnivore holster.

With 1,000 lumens and a 928-foot beam at the ready, the TLR1-HL is designed to provide maximum visibility when illuminating a room, alley or other wide space. Meanwhile, the TLR-7A features 500 lumens and a 459-foot beam, but also comes with an ergonomic, ambidextrous on/off switch that can be customized for either a low or high position to match a user’s grip style.

Both lights feature a rail clamp system that securely attaches the light without tools and without a user needing to put their hands in front of the muzzle. The TLR1-HL mounts directly on Glock-style and Picatinny rails, and includes keys for Glock-style, Picatinny, Beretta 90-Two, S&W 99, S&W TSW and SIG P320 setups.

Each Streamlight is designed to withstand the tests of time and field use with anodized machined aluminum and IPX7 waterproof ratings. The TLR1-HL can run up to 1.5 hours on two CR123A lithium batteries and the TLR-7A can run up to 1.5 hours on one CR123A lithium battery. A safe off feature also prevents accidental activation and saves battery life.

The lights feature a black finish and engraved Blackhawk logo, are assembled in the U.S., and feature Streamlight’s limited lifetime warranty. MSRP for the TLR1-HL is $209.95 and MSRP for the TLR-7A is $174.95.

For more information about these tactical lights or compatible holsters, visit blackhawk.com. For more support or customer service, visit streamlight.com.


About Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this obsession with quality applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide gear that won’t let you down. Because we’re not just making stuff – we’re honoring a vow.


Posted in Tactical Lighting | Tagged , , , | Comments Off on Blackhawk Introduces Streamlight TLR-7A Flex and TLR1-HL Tactical Weapon Lights

Introducing the MPA BA PMR Pro Rifle II, Now with Trigger Tech Diamond Trigger, for the 2021 Precision Rifle Series (PRS) Season, from MasterPiece Arms (MPA)

The MPA BA PMR Pro Rifle II (Precision Match Rifle) is designed specifically for the Production Class requirements of the PRS with the price threshold for the 2021 season of $2,500.

Comer, Ga. (July 2021) – MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles and Chassis Systems, has specifically designed its new MPA BA PMR Pro Rifle II (Product Match Rifle) to meet the Production Class requirements of the 2021 Precision Rifle Series (PRS) competition season. This rifle has been approved for use within this division of the PRS and includes many competition-related features while staying under the price threshold of $2,500 for this class. It is available in either a Black or Tungsten Cerakote® finish and has a ½ MOA accuracy guarantee.  The PMR Pro Rifle II now includes the Trigger Tech Diamond Trigger that features a 4 oz. – 2 lbs. pull weight range.

The MPA BA PMR Pro Rifle II utilizes the MPA BA Competition Chassis, which is machined on MPA’s CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The v-bedding system provides additional clearance for glass bedding action and straight section of the barrel. The chassis also includes a built-in inclinometer, thread protector (no muzzle brake), thumb notch, lower mounted Picatinny Rail, 20 MOA Scope Rail, EVG Grip, Ultra Bag Rider, V4 Spigot Mount, and is R.A.T. System compatible. The MPA Buttstock comes with an adjustable cheek riser and length of pull that is locked in position with a series of set screws that are embedded into the buttstock body. If the customer would like to add a muzzle brake to this rifle, it can be added as an accessory and it will not affect the Production Class status. Muzzle brake options for the MPA BA PMR Pro Rifle II include the MPA Premium Bolt Action Muzzle Brake 6.5mm and the MPA Premium Bolt Action Muzzle Brake 30 Cal.

The MPA BA PMR Pro Rifle II includes a Lothar Walther hand-lapped 416R Stainless Premium Barrel Blank with a polished barrel finish. The chamber is indicated within 0.0001” or less to the bore of the rifle and is bore and land inspected on a video borescope.

MPA BA PMR Pro Rifle II Specifications:

  • Caliber: 6mm Creedmoor, 6GT, 6.5 Creedmoor, 6.5 PRC, 6 Dasher, 6BR, 6BRA, 6XC, 6 x 47 Lapua, .308 Win, .223
  • Action: MPA/Curtis Short Action
  • Bolt: 60 Degree Bolt Throw
  • Chassis: MPA BA Competition Chassis
  • Chassis Weight: 5 lbs.
  • Rifle Weight: 12.5 lbs.
  • Barrel: Lothar Walther Hand Lapped 416R Stainless Premium Barrel Blank
  • Barrel Twist: Caliber specific
  • Barrel Length: 26” (6.5mm and 6mm)
  • Barrel Muzzle Thread: 5/8-24 TPI
  • Barrel Profile: #M24 Contour
  • Coating: Cerakote Chassis, Polished Barrel
  • Length of Pull: 13.75 – 15”
  • Trigger: Trigger Tech Diamond or Timney HIT Trigger
  • Trigger Pull: Trigger Tech Diamond: 4 oz. – 2 lbs. (Customer Choice)
  • Timney HIT Trigger: 6 oz. – 2 lbs. (Customer Choice)
  • Magazine: 10 Round AICS Type Magazine Included
  • MSRP: $2,499.00

MPA makes every effort to get the product to the customer as quickly as possible. These are hand-built precision instruments and not production components. To see MPA’s latest delivery and lead times for all Bolt Action Rifles and Chassis, visit https://masterpiecearms.com/bolt-action-rifle-and-chassis-current-delivery-times/.

For more information on MasterPiece Arms and their product line of rifles, chassis systems, and accessories, visit www.masterpiecearms.com.

About MasterPiece Arms:

MasterPiece Arms‘ main offices, located in Comer, Georgia, combine quality engineering and state-of-the-art manufacturing to design and produce firearms, such as highly successful BA Rifles and Chassis Systems. Masterpiece Arms uses high accuracy CNC machining, turning, barrel making, laser cutting, and bending in its manufacturing process controlled by their ISO9002/TS16949 Registered Quality System.

MPA engineers test and retest our weapons to provide customers with one of the most enjoyable guns available. With versatile uses, such as personal and home protection, long-range shooting, hunting, and tactical interests, MPA products are one of a kind and backed by a lifetime warranty for original owners. Learn more about MasterPiece Arms products at www.masterpiecearms.com or call 866.803.0000.


Posted in Weapon systems | Tagged , , , , , | Comments Off on Introducing the MPA BA PMR Pro Rifle II, Now with Trigger Tech Diamond Trigger, for the 2021 Precision Rifle Series (PRS) Season, from MasterPiece Arms (MPA)

Swagger Bipods: Strength & Flexibility Where it Counts

Grand Island, NE (July 1, 2021) – When Americans gather on Independence Day to celebrate liberty, one activity, in particular, will demonstrate their freedom like no other: Shooting. More practical than fireworks though less filling than BBQ and burgers, safe fun with firearms is one of the best ways any American can celebrate our unique nation’s unprecedented level of gun ownership. And there’s no better way to accurately and easily control your shooting than with Swagger bipods.

Now that ammunition is not quite as scarce as it has been, shooters don’t have to feel wasteful when they hit the range for a target shooting session with two uniquely American designs–an MSR or AR-style rifle and a Swagger Tactical Bipod. Both the SEA-12 and SFR-10 QD bipods work well for tactical use and hunting and can be easily mounted on a Picatinny rail.

The Swagger SEA12 (Extreme Angle) Bipod has overmolded flex joints which help stabilize its swagger, making it easy to stay on target. Its most effective range of adjustment is 9 to 12 inches and can even go lower by pivoting the legs forward up to 45 degrees. An extremely wide range of can and traverse makes the Swagger SEA12 perfect when you need to swing your rifle far and wide to engage targets. Click here to learn more about the new SEA12.

The Swagger SFR10 QD (Flex to Rigid, Quick Detach) Bipod provides shooters with the ability to adjust the level of “Swagger flex” – or eliminate it when you need a traditional rigid-leg bipod platform. With the most effective adjustment range of 6 to 10.5 inches, this bipod lets you go lower with the same style of adjustment found on the SEA12, allowing you to pivot the legs forward up to 45 degrees. Click here to learn more about the new SFR10 QD.

Celebrating liberty with firearms is as American as apple pie, if not more so. Swagger bipods wishes all Americans a happy Independence Day and asks them to remember the Swagger Limited Lifetime Guarantee when they go shopping for a new bipod.

SWAGGER SEA12 (EXTREME ANGLE) BIPOD FEATURES

· Mounts to Picatinny rail

· Overmolded Flex Ready joint for a more stable shooting platform

· Designed for hunting or shooting situations where extreme angles apply

· Offers extreme can and traverse

· Legs can be set at a 45º angle for a lower shooting position

· Offers plenty of clearance for magazine changes

SWAGGER SEA12 (EXTREME ANGLE) BIPOD SPECIFICATIONS

· Weight: 13.6 ounces

· Most effective range: 9 to 12 inches

· Item number: SWAG-BP-SEA12

· UPC: 857925007245

MSRP: $199.99

SWAGGER SFR10 QD (FLEX TO RIGID, QUICK DETACH) BIPOD FEATURES

· Quick Detach

· Mounts to Picatinny rail

· Designed for long-range hunting, competition shooting, and combat situations

· Adjustable flex tension allows the shooter to fine-tune flexibility to the situational need

· Easily adjustable from flexible to rigid

· Legs can be set at a 45º angle for a lower shooting position

· Offers the ability to quickly acquire & visually maintain a target in any terrain

· Provides plenty of clearance for magazine changes

SWAGGER SFR10 (FLEX TO RIGID, QUICK DETACH) SPECIFICATIONS

· Weight: 15.2 ounces

· Most effective range: 6 to 10.5 inches

· Item number: SWAG-BP-SFR10

· UPC: 857925007252

· MSRP: $249.99



Swagger Bipods are made in the USA, incorporating numerous unique high-performance features, including our patented Flex Ready Technology built into many of our products. At Swagger, we are confident our bipods will do for you what no bipod has ever done before, and back this claim with our Limited Lifetime Guarantee.

Swagger bipods are also covered by our Shoot With Confidence Guarantee. If your Swagger bipod does not give you more shooting flexibility and more shooting confidence, send the product back to us within 30 days of purchase, with proof of purchase from an authorized dealer, and we will buy it back. No questions asked.

For more information, please visit WWW.SWAGGERBIPODS.COM

Posted in Accessories | Tagged , , , | Comments Off on Swagger Bipods: Strength & Flexibility Where it Counts