FOG HORN

Uncle Mike’s Adds New Long Gun Cases and Range Gear

Posted on Thursday, 17 June, 2021 by twobirdsflyingpub

Uncle Mike’s Adds New Long Gun Cases and Range Gear

New Padded Long Gun Cases and Range Bag Now Available

VIRGINIA BEACH, Va. – June 16, 2021 – Uncle Mike’s announces the release of new pieces of range gear, including padded long gun cases and a multipurpose sportsmen’s range bag, each designed for maximum portability and protection.

For those frequently transporting firearms, the new Uncle Mike’s padded long gun cases are shaped to accommodate most scoped rifles or shotguns. Balanced, wraparound nylon handles make for a more comfortable carry, while a full-length zipper allows the case to open flat. Most importantly, these cases are built to protect. Each features thick padding to cushion long guns from bumps and bruises, and the smooth, snag-resistant lining means it’s easier to get the firearm in and out of the case.

Options include black and forest green scoped rifle cases, available in sizes to fit up to 40″, 44″ or 48″ rifles. The same color options are available for shotgun cases in sizes to fit up to 48″ or 52″ shotguns. MSRP for all cases is $19.95.

The new sportsmen’s range bag from Uncle Mike’s has been designed to be a handgunner’s best friend. Specifically designed to carry two handguns, ammunition, and other gear to and from the range, the new range bag is as capable as it is convenient. The main compartment flap opens fully and has two removable dividers as well as two included pistol rugs to keep shooters organized. A wraparound nylon carry handle and removable shoulder strap make the bag a breeze to transport, while lockable zippers provide an added layer of security. MSRP for the range bag is $30.95.

To learn more about these or other Uncle Mike’s products, visit unclemikes.com.

About Uncle Mike’s

Established in 1947 and tested in the Oregon backcountry, Uncle Mike’s has more than 60 years of experience producing tough, reliable gear for hunters and shooters. Crafted with pride and built to last, Uncle Mike’s offers swivels, slings, holsters, ammo, gear holders and gun cases. Simply the finest in shooting accessories, Uncle Mike’s gear rises to the challenge. For more information about Uncle Mike’s products visit www.unclemikes.com.

Posted in Gear | Tagged Long Gun Cases, Range Bag, Uncle Mike's | Comments Off

Greater Chicago Campaign Targets Illegal Gun Purchases

Posted on Thursday, 17 June, 2021 by twobirdsflyingpub

NSSF, ATF, DOJ Emphasize ‘Don’t Lie for the Other Guy’

June 16, 2021

Greater Chicago Campaign Targets Illegal Gun Purchases NSSF, ATF, DOJ Emphasize ‘Don’t Lie For the Other Guy^TM’

Des Plaines, Ill. — As part of an ongoing national effort to help prevent illegal “straw” purchases of firearms, the National Shooting Sports Foundation^® (NSSF^®), the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) and the Department of Justice (DOJ) are reminding the Greater Chicago area public that stiff penalties are in place for individuals convicted of such unlawful purchases. The campaign is in its 21^st year and is a cornerstone of the cooperative relationship of the firearm industry, law enforcement and retailers.
Billboard, radio, streaming audio and digital advertisements for the Don’t Lie For the Other Guy program have been purchased by NSSF in key locations throughout the region with the message: “Buy a gun for someone who can’t and buy yourself 10 years in jail. Don’t Lie For the Other Guy.”
The month-long public awareness campaign was officially launched today with a short press conference program at Maxon Shooters Supplies and Indoor Range in Des Plaines, Ill. Present at the event were representatives of the ATF Chicago Field Division, the U.S. Attorney’s Office for the Northern District of Illinois, the U.S. Attorney’s Office for the Northern District of Indiana and NSSF.
The Chicago area “Don’t Lie” includes more than 33 outdoor billboards, digital bulletin boards and posters. There are also more than 150 radio spots playing and more than 2 million digital streaming radio service impressions. On social media, “Don’t Lie” advertisements total nearly 2.5 million targeted geo-fenced online mobile advertisements and almost 1 million Facebook and Instagram impressions. Chicago was chosen for this special campaign by ATF. No taxpayer dollars are used. The program is funded in full by the firearm industry.
“The firearm industry has always been focused on keeping firearms out of the hands of those who should not possess them. We are proud of our more than two-decade cooperative relationship with the ATF, the DOJ and the entire law enforcement community to assist them in their collective efforts to reduce criminal acquisition and misuse of firearms,” said Joe Bartozzi, NSSF President and CEO.
“Don’t Lie” is a cooperative program between ATF, DOJ and NSSF, the trade association for the firearm and ammunition industry. The effort was developed more than two decades ago to raise public awareness about the seriousness of the crime of purchasing a firearm for someone who cannot legally do so themself. The program also helps ATF educate firearm retailers to be better prepared to deter potential straw purchases. The public campaign drives home the message that anyone attempting an illegal firearm purchase faces a stiff federal felony penalty of up to 10 years in jail or up to $250,000 in fines.
To legally purchase a firearm, a person must be able to pass an FBI National Instant Criminal Background Check System or NICS check and fully comply with all state and local laws. When a criminal knows he or she cannot pass this check, they may try to induce a friend or other person to make the purchase on their behalf. This is known as a straw purchase and is a felony.
This public awareness campaign constitutes only part of the Don’t Lie For the Other Guy outreach effort. The full Don’t Lie For the Other Guy program, which also involves educating firearm retailers to better detect and prevent straw purchases, has been rolled out in major cities throughout the country. In the retailer segment, federal firearms licensees are provided a Don’t Lie For the Other Guy retailer kit containing a training video and informational brochure for store owners and staff, as well as point-of-purchase displays aimed to deter illegal straw purchases.
Learn more about Don’t Lie For the Other Guy at www.dontlie.org.

About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

National Shooting Sports Foundation | 11 Mile Hill Rd, Newtown, CT 06470

Posted in NSSF/NRA | Tagged Chicago, Il, Illegal guns, NSSF | Comments Off

RAFAEL’s BNET SDR communication selected by Asian air force

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

VP Yoav Wermuth, head of Rafael’s C³I directorate: “This new contract strengthens our position as a major supplier of aerial communication systems”

Tel Aviv, June 15, 2021 – Rafael Advanced Defense Systems has been selected by an Asian air force to equip its fleet of aircraft with the BNET-AR communication solution.

The BNET Family of SDR provides a robust voice and data-link solution and supports simultaneous services of data, voice and video services with multiple auto relays.

The BNET is operational and combat-proven with a number of air forces around the world, featuring a unique, patented software-defined radio and network architecture, delivering wideband communications with low delay and reliable connectivity.

The variant that will be supplied is the BNET-AR, a modular multiband SDR for airborne platforms, integrated onboard fighters and helicopters as well as Ground Control Stations equipped with the same BNET-AR, enabling net-centric operations and real-time situation awareness.

The BNET Family is a Spectrum-Aware SDR – utilizing the spectral arena of the battlefield to the fullest in a cognitive way, thus addressing the challenges of the modern battlefield (e.g. limited spectrum, connecting multiple sensors and shooters, etc.). All this is achieved by BNET-patented technology – Multi-Channel Reception (MCR), which enables it to receive and analyze information from numerous frequency channels, simultaneously, using a single RF head.

VP Yoav Wermuth, head of Rafael’s C³I directorate: “This new contract strengthens our position as a major supplier of aerial communication systems as vital enablers, required to be agile, allow fast deployment, be highly scalable, and remain robust in the face of the chaos of battle, all the while operating under constant jamming and cyber attacks”.

About Rafael

Rafael Advanced Defense Systems Ltd. designs, develops, manufactures and supplies a wide range of high-tech defense systems for air, land, sea, and space applications. The company offers its customers a diversified array of innovative solutions at the leading edge of global technology, from underwater systems through naval, ground, and air superiority systems to space systems. Rafael is one of Israel’s three largest defense companies, and employs 8,000 people and numerous subcontractors and service suppliers. Please consult Rafael’s online site at www.rafael.co.il.

For more information, please contact Mr. Ishai David at ishaid@rafael.co.il

Posted in Comms | Tagged BNET-AR, communications, Rafael Advanced Defense Systems Ltd. | Comments Off

Mikey Hartman, CEO of CAA USA, Announces Sneak Peek of New MCK PCC

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

CAA USA CEO, LTC. (Ret.) Mikey Hartman, announces via CAA USA YouTube video, the creation of a whole new MCK pistol caliber carbine. He’s asking you to help name the game-changing model as well as giving away the first PCC from the assembly line to the winner.

Pompano Beach, Fla. (June 2021) – CAA USA, designers and developers of the world-famous MCK/Micro Conversion Kit, have just announced a game-changing MCK PCC, currently in development, through the CAA USA YouTube Channel. LTC. (Ret.) Mikey Hartman, CEO of CAA USA, refers to the new MCK pistol caliber carbine as a first-of-its-kind firearm “humanly designed.”

“I spent most of my adult life teaching the Israeli military how to shoot. One of the most frustrating issues that I encountered while teaching over 500,000 soldiers was the fact that every gun I have ever shot with or trained with has always been straight, similar to a broomstick. This straight line, in my opinion, is wrong, outside of the barrel, of course!” Hartman explained. “We are forced to contort ourselves to the straight rifle instead of developing a rifle that is built with the human body design. In our new MCK PCC, this will be addressed. Some of the ideas are radical and have never been seen before. We believe that once our new patent-pending rifle is out there and the public can feel and shoot with it, it will be met with great enthusiasm. Every point of contact with the shooter’s body will be adjusted to make it a more natural and secure hold.”

LTC Hartman will not just be changing the rifle design but will also be changing the trigger pull of the rifle to a never yet seen option. The new PCC firearm will come in two calibers, 9mm and soon after 10mm. It can be fired with any standard Glock 9mm magazine as well as CAA USA’s proprietary magazine that will be supplied with the PCC. It will have a blow-back action with a choice of barrel lengths: 16.5,” 10,” and a 10” pinned and welded faux suppressor options. The MCK PCC will also feature the familiar MCK “look” but in a carbine length style.

“We’ve been testing the internal mechanism for the new MCK PCC and have shot over 400,00 rounds with zero stoppages,” Hartman continued. “We have also been tossing around a new name and I have decided to let our fans and customers create the name of this unique firearm.”

To participate in suggesting a name for the new MCK PCC firearm, leave your suggestion in the comment section of the MCK PCC announcement video. Mikey Hartman will choose a winner and they will receive the very first PCC with serial number 0001 off the manufacturing line. *

“We are very excited to get this rifle out to the public, and will be showing sneak peeks during the remainder of the year with the official launch at 2022 SHOT Show in Las Vegas in January of 2022,” Hartman said. “We are aiming and will keep the MSRP under $900.00.”

*Participation in the MCK PCC naming contest is valid from June 1, 2021, through Dec. 31, 2021. The winner must comply with all state and federal regulations and be able to provide their local dealer’s information for product delivery. All Dealer FFL transfer charges are the responsibility of the winner.

About CAA USA:

CAA USA is a designer, developer, and distributor of modern tactical accessories, optics, and handgun conversion kits targeting the Armed Forces, Law Enforcement, and firearm enthusiasts across the globe. CAA USA’s famous conversion kit, the MCK/Micro Conversion Kit, has taken the country by storm with models for Glock, Sig Sauer, Smith & Wesson, Springfield, CZ as well as the upcoming Taurus and H&K. This made-for end-user conversion kit allows you to increase your accuracy and is an overall fun range tool.

CAA USA

Pompano Beach, FL 33064

P: 754-205-9385 x 8116

www.caagearup.com

Posted in Uncategorized | Comments Off

NTOA recommends SLx MD-25 ACSS for Duty-Use

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

PRIMARY ARMS OPTICS’ SLx® MD-25 ACSS® RECEIVES RECOMMENDATION FOR DUTY-USE BY NATIONAL TACTICAL OFFICERS ASSOCIATION

HOUSTON, TEXAS – Primary Arms Optics is proud to announce that their SLx® MD-25 Micro Red Dot with ACSS® CQB Reticle was recommended for duty-use following extensive testing with the National Tactical Officers Association (NTOA).
The NTOA is one of America’s preeminent voices for Law Enforcement products and equipment, leveraging their network of expert evaluators with real-world trials to evaluate new products. The NTOA’s tests include weeks of practical assessment, concluding in a final score that grades products according to at least 6 of 13 major evaluating criteria. For optics, these criteria include Design, Performance, Ease of Use, Size, Quality, Durability, Storage, Versatility, Convenience, Application, Comfort, Accuracy, and Cleaning & Maintenance. To pass, the product must average at least a 3 across all criteria. Products that perform exceptionally well can earn additional recognition rewards with a ‘Silver’ rating with a 4-4.49 average out of 5.
Following extensive field testing, the NTOA released their findings and awarded the SLx MD-25 Micro Red Dot Sight with ACSS CQB Reticle the coveted ‘Silver’ rating with a score of 4.43 out of 5. Evaluators agreed on the sight’s durability and ease-of-use, noting that the unique 25mm aperture made it easier to point and acquire their target for quick engagements. Evaluators also expressed their appreciation of the ACSS CQB reticle, which combines a fast-acquisition horseshoe with an infinitely precise center chevron and BDC holdover dots. In one review, an officer noted, “Overall, this has become my favorite optic for its price range. Its controls are very easy to use and large to be able to handle with gloves or under stress…. The optic seems to be very sturdy and exceeded my expectations.”

In response to the positive rating, Primary Arms Optics expressed their gratitude. “The implementation of our ACSS-CQB reticle into the proven MD-25 red dot platform allows Primary Arms Optics to bring even more value, technology and versatility to the customer,” says Robert Sheets, Primary Arms Optics’ Director of Engineering. “The MD-25 ACSS utilizes cutting edge LED technology, premium coatings and high-grade materials packaged into a robust and durable package that performs well above its price point. We are proud that the NTOA recognized benefits in their evaluation.”

To see all Primary Arms Optics recommended by the NTOA, visit https://www.primaryarms.com/ntoa.

Primary Arms Optics
Founded in 2008, Primary Arms Optics® is a leading innovator in tactical optics, offering a comprehensive selection of rifle scopes, prism scopes, red dot sights, optic mounts, and accessories. Their Advanced Combined Sighting System (ACSS®) is a high-performance reticle solution to the challenges of modern marksmanship, distilling complex mathematics into intuitive holdovers that enhance your speed and precision. Each ACSS reticle is specially designed to outperform in real-world applications, incorporating a mix of tools to deliver instant firing solutions. These tools may include ballistic drop compensation, auto-ranging stadia, wind holds, moving target leads, or an infinitely-precise center chevron. Primary Arms Optics produces several tiers of products to meet the needs of any budget. The premier PLx® optics line prioritizes clarity and craftsmanship with first-class materials. The mid-tier GLx optics incorporate premium technologies with approachable pricing, while the popular SLx® optics offer both proven reliability and value. Every Primary Arms Optics product is hand-inspected at their Houston-based headquarters, and all their products come with a Primary Arms lifetime warranty.

For more information on Primary Arms, visit the company website at www.primaryarms.com

Posted in NTOA, sights | Tagged optics, Primary Arms, SLx MD-25 ACSS | Comments Off

Shell Shock Technologies Welcomes David Blanton as its Newest Sponsored Shooter

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

Shell Shock Technologies Welcomes David Blanton as its Newest Sponsored Shooter

Shell Shock Technologies will supply Blanton with its NAS3 cases for his competitions during 2021.

Westport, Conn. (June 2021) – Shell Shock Technologies, LLC., an early-stage technology, and manufacturing company focused on developing innovative case technologies for the ammunition industry, is pleased to announce it has signed David Blanton as its newest sponsored shooter. Shell Shock Technologies will be supplying Blanton with its NAS3 cases for his competitions in 2021.

“I love Shell Shock Technologies’ NAS3 cases for a bunch of reasons. Shooting a wildcat round like 9 major, the two-piece design holds together, where once fired brass can be iffy. I have had two case failures this year on once fired brass and that’s not a problem anymore. For traditional loads in high volume shooting like USPSA or IDPA you can pick up all your ‘brass’ with a magnet on a stick; saves time getting off the range. The case design puts an end to rejected rounds due to bulged bases. It’s great,” commented Blanton.

Blanton started shooting competitively when he began getting serious about concealed carry and found a love for the camaraderie and competitive outlet competition shooting provided him with. His love for competitive shooting spurred him to start The Humble Marksman, his YouTube Channel where he tries to expose a mainstream audience to competition shooting. Blanton is a two-division Master in USPSA, as well as a Master in IDPA.

He can be seen competing next at the 2021 Area 4 Championship, hosted by The United States Shooting Academy in Tulsa, Oklahoma, Sept. 23 – 26, 2021.

About Shell Shock Technologies NAS3 Cases:

NAS3 9mm cases are 50 percent lighter than brass cases, offer greater lubricity and will not abrade, clog, foul, wear-out, or damage breach and ejector mechanisms. The cases offer greater corrosion resistance, tensile strength (2x stronger) and elasticity than brass. NAS3 cases will not split, chip, crack or grow (stretch) and are fully reloadable (using S3 Reload dies) and can be reloaded many more times than brass cases. NAS3 cases have been tested successfully by customers to pressures over 70k psi. NAS3 cases can be picked up with a magnet. The head can be colored for branding purposes and easy load identification.

NAS3 is “Best in Class” for maintaining consistent velocity between rounds. In an independent test performed by H.P. White Laboratory (a major munitions testing facility), rounds fired using NAS3 cases achieved a velocity standard deviation of 0.093 FPS (124-grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3fps).

To learn more about Shell Shock’s revolutionary technology, visit www.shellshocktech.com.

About Shell Shock Technologies, LLC:

Founded in Westport, Connecticut, in 2015, Shell Shock Technologies, LLC is an early stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry. Shell Shock is a component manufacturer supplying shell cases to the shooting sports market, as well as to U.S. and foreign ammunition manufacturers, law enforcement, military and other government agencies. Shell Shock does not load ammunition. www.shellshocktech.com

Posted in Ammunition, competitions | Tagged David Blanton, Shell Shock Technologies | Comments Off

Your Face Will Thank You

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

Replace your current MDT SRS (Skeleton RIfle Stock) cheek piece with the MDT Elite Cheek Piece featuring a more narrow profile cheek rest for better positioning when shooting weak side. This Elite Cheek Piece also comes with a 1/16″ neoprene foam pad on the surface for added comfort.

ELITE CHEEK PIECE | SRS STANDARD CHEEK PIECE

COMPATIBLE WITH THE

Review star rating

SAVAGE STEALTH

“Installation took me 5 min to fit it onto the chassis . Adjustable in every way and won’t get lose with the addition lock screws . Once again great product from MDT .”

LUCIANO G.

CNC machined from 6061-T6 aircraft grade aluminum complete with a protective Cerakote finishing available in 8 different colors.

8 COLOR OPTIONS

SRS-Fixed and SRS-Lite available in Black and FDE.

Black buttstock

FDE buttstock

Blue buttstock

ODG buttstock

White buttstock

Grey buttstock

Red buttstock

Bronze buttstock

CUSTOMIZABLE

Customize your buttstock with multiple accessories. All buttstocks come with multiple QD points so you can use your optimal sling setup.

Review star rating

IMPRESSIVE QUALITY!

“I chose the Elite version with the additional guide rod for added stability. I attached the bag rider and butstock weight. The fit was perfect and it looks fantastic on my ESS chassis. Highly recommended!”

RICHARD T.

XTN Interface icon

XTN INTERFACE

SRS-X Elite | SRS-X | SRS-XF

XTN Interface front

The XTN interface integrates seamlessly with the MDT ACC and MDT ESS Chassis Systems making room for a built in thumb shelf. This will improve your experience and consistency behind the rifle allowing you to focus on the shot, ultimately improving your precision.

XTN Interface side

AR Fixed Interface icon

AR FIXED INTERFACE

SRS-Fixed | SRS-Lite

AR Fixed Interface front

The AR Fixed interface allows you to use the buttstock with any fixed style rifle or chassis, including the MDT TAC21 GEN2 and MDT LSS-XL GEN2 Chassis Systems.

Review star rating

FLAWLESS DESIGN

“Fits well, design flawless. It’s true, accuracy significantly improved.”

JAMES J.

Teach Ol’ Pop a New Thing or Two with Ballistic AE

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

Gainesville, GA (June 15, 2021) No doubt, your father got at least some of his long-range shooting ideas from his father. Ideas like, “Zero three inches high at 100 yards, and you can take on any deer out to 300 yards,” and, “If the leaves flutter, the wind’s at 5MPH. Leaves are flipping over 10MPH!”

Today, Dad knows that precision shooting is more possible than ever. But he swears he’s never going to spend $2,000 on one of those “newfangled” riflescopes.

For Father’s Day this year, show him that he doesn’t need a pricey scope to be a much better long-range shooter. Take him to the range and show him what Ballistic can do.

Now, some back-in-the-day advice had legs. Zeroing your rifle at three inches high at 100 yards, for example, was based on the fact that the vital zone on a deer is about the size of a dinner plate. So, with that zero, a 300-yard shot aimed at the high shoulder should account for the bullet drop, assuming a higher-powered caliber like the 300 Win Mag.

Fluttering leaves? This bit of advice recognized how important wind was in any shooting calculations, with the leaves as a handy reference point in the field.

But, why guess, especially today when Ballistic can put you on target quickly and precisely?

Start Dad off by showing him how to build a Ballistic Bullet Profile. That Profile contains all the basic inputs–including the manufacturer’s ballistic coefficient and bullet weight, sight height, and muzzle velocity, to name just a few plus the all-important atmospheric conditions.

Ballistic employs a huge library of ballistic data, incorporating data on over 5,000 projectiles, factory loads, and military loads, plus performance data points (like ballistic coefficients) from leading manufacturers, military testing, and performance testing.

The result? Precise hold-over points at exact distances.

Wind is the biggest problem long-range shooters face. But forget reading the leaves. First, there are numerous devices to tell you actual wind speed. Let Dad see one of them at work, like a Kestrel. No guessing required!

Once you have that speed, show Dad how to input wind speed and direction into Ballistic. You can use angle inputs (e.g., 90° = crosswind left to right) for the wind direction or the O’clock format (e.g., 3:00 will automatically translate to 90°). Headwinds can be added in, too, and Ballistic will automatically adjust velocity to account for your headwind calculation.

The Ballistic Advanced Wind Kit allows shooters to quickly program in even the most complex wind scenarios, for up to eight wind sources. Simply tap to create a new wind zone and then slide it to the appropriate range.

With so much to offer, it’s no wonder Ballistic is the #1 choice among long-range shooters. Make every one of Dad’s shots count this Father’s Day…with the aid of Ballistic.

· For more information, please visit: WWW.BALLISTICAPP.COM

Ballistic is the definitive ballistics trajectory calculator, intended for long-range and precision shooters who want a serious–and a seriously accurate–application. Ballistic will calculate your bullet’s trajectory, windage, velocity, energy, lead, and flight time for any valid range. The app can also compensate for atmospheric conditions such as temperature, barometric pressure, humidity, and altitude–it can even accept density of air or density altitude inputs! The world-renowned JBM Ballistics engine powers all Ballistic computations. Ballistic is used by competition shooters, long-range hunters, and the military to deliver the most precise calculations possible.

With Ballistic, you’ll be able to make the most accurate calculations for every shot, everywhere, even in areas with no cellular coverage.

For more information, please visit

WWW.BALLISTICAPP.COM

Posted in Sniper Systems and Tools | Tagged Ballistic App | Comments Off

AeroVironment Relocates Corporate Headquarters to Arlington, Virginia

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

SIMI VALLEY, Calif., June 15, 2021 – AeroVironment, Inc. (NASDAQ: AVAV), a global leader in intelligent, multi-domain robotic systems, today announced the relocation of its corporate headquarters from Simi Valley, Calif. to Arlington, Va., effective June 15, 2021.

“The greater Washington D.C. area is where many of our key customers are located, and expanding our presence in the region will further our access to decision makers, influencers and talent,” said Wahid Nawabi, AeroVironment president and chief executive officer. “Our recent acquisition of Progeny Systems ISG and our new Artificial Intelligence Innovation Center expand our footprint near the Beltway and build on our momentum as we continue to grow our portfolio and global scope. We look forward to growing our Washington, D.C. presence and continuing to serve our customers with solutions that help them Proceed with Certainty.”

AeroVironment will maintain its presence and existing operations in Simi Valley, Calif. and other existing sites across the United States and in Germany.

ABOUT AEROVIRONMENT, INC.

AeroVironment (NASDAQ: AVAV) provides technology solutions at the intersection of robotics, sensors, software analytics and connectivity that deliver more actionable intelligence so you can Proceed with Certainty. Celebrating 50 years of innovation, AeroVironment is a global leader in intelligent, multi-domain robotic systems and serves defense, government and commercial customers. For more information, visit www.avinc.com.

SAFE HARBOR STATEMENT

Certain statements in this press release may constitute “forward-looking statements” as that term is defined in the Private Securities Litigation Reform Act of 1995. These statements are made on the basis of current expectations, forecasts and assumptions that involve risks and uncertainties, including, but not limited to, economic, competitive, governmental and technological factors outside of our control, that may cause our business, strategy or actual results to differ materially from those expressed or implied. Factors that could cause actual results to differ materially from the forward-looking statements include, but are not limited to, our ability to perform under existing contracts and obtain additional contracts; changes in the regulatory environment; the activities of competitors; failure of the markets in which we operate to grow; failure to expand into new markets; failure to develop new products or integrate new technology with current products; and general economic and business conditions in the United States and elsewhere in the world. For a further list and description of such risks and uncertainties, see the reports we file with the Securities and Exchange Commission. We do not intend, and undertake no obligation, to update any forward-looking statements, whether as a result of new information, future events or otherwise.

Posted in UAV, UGV, UMV | Tagged AeroVironment, Arlington, relocation, VA | Comments Off

KUSA: BROTHERS IN ARMS GIVEAWAY!

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

US-Made FORGED AKs Coming SOON from Kalashnikov USA -The Firearm Blog

BROTHERS IN ARMS GIVEAWAY!

KALASHNIKOV USA & ATLANTIC FIREARMS

KUSA KR-103 AK47 Rifle
KR-9 Pistol

ENTER TO WIN

Kalashnikov USA

3901 NE 12th Ave #400

Pompano Beach, FL 33064

Posted in Promotions | Tagged Kalashnikov USA, KUSA | Comments Off

NDIA supports Senate vote on Innovation and Competition Act

Posted on Wednesday, 16 June, 2021 by twobirdsflyingpub

Sixteen new members join NDIA board of directors

NDIA welcomes Senate support of Innovation and Competition Act

ARLINGTON, VA — The National Defense Industrial Association applauds the Senate’s passage of the U.S. Innovation and Competition Act. In a 68-32 vote, the Senate showed broad support for the need to bolster U.S. manufacturing, technological innovation and competitiveness against pacing threats from China.

Sen. Chuck Schumer (D-NY) introduced the act, formerly known as the Endless Frontier Act, with bipartisan co-sponsorship from 13 senators. The legislation includes $52 billion to assist American manufacturers of semiconductors production in response to the global shortage, and $81 billion to support innovation efforts led by the National Science Foundation.

In response to China’s aggression and its abuse of foreign trade practices, the bill looks to strengthen partnerships with allies, such as Australia and Japan, and to halt the importation of products made with stolen intellectual property. It also allows the U.S. president to impose sanctions against any entities that have benefited from intellectual theft on behalf of China against the United States.

The National Defense Industrial Association will follow the Endless Frontier Act as it goes to the House of Representatives for consideration.

For media queries, please contact Evamarie Socha at the information listed below.

At the Heart of the Mission Since 1919

Evamarie Socha

Director of Public Relations and Communications

2101 Wilson Boulevard, Suite 700, Arlington, VA 22201

(703) 247-2579 | Cell (703) 472-3806 | NDIA.org<http://www.ndia.org/>

Posted in NDIA | Tagged Innovation and Competition Act, NDIA | Comments Off

Sneak Preview: Streamlight TLR-7A Contour Remote

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

The TLR-7A Contour Remote is a touch of genius by Streamlight’s designers; it explains the company’s explosive growth with law enforcement domestically and internationally. If you’re a Glock user you’ll want to read my upcoming review.

Posted in Sneak Previews, Tactical Lighting | Tagged Contour, remote, Streamlight, TLR-7A, weapon mounted light | Comments Off

UK Ministry of Defence (MoD) selects Thermoteknix state-of-art thermal imaging clip-on systems to enhance night-time soldier combat

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

Thermoteknix selected by UK MoD to supply ClipIR XD-E Thermal Clip-on Systems | Frag Out! Magazine CAMBRIDGE, UK, FOR IMMEDIATE RELEASE: Thermal imaging and night vision specialist Thermoteknix has been awarded a contract to supply the UK Ministry of Defence (MoD) with its ClipIR XD-E Thermal Clip-on Systems (TCOS). The first phase of units, in excess of £3 million, will be delivered within the next 12 months under the TCOS program with options to procure additional units over the life of the contract.

Read official UK MoD announcement here: ‘State-of-the-art night vision goggles secured for British Army’

The ClipIR XD-E systems will deliver enhanced situational awareness and increased threat detection capabilities at low light or no light situations to dismounted British ground forces.

The miniature clip-on infrared thermal imager from Thermoteknix converts an existing monocular or binocular night vision device into an enhanced surveillance solution. The fused combination of thermal and night vision technologies provides superior tactical advantages compared to standard night vision or thermal imaging alone.

ClipIR XD-E provides a 40-degree field of view to detect targets at distances of up to 500m allowing the user to view a target without being detected.

“We are delighted that our state-of-the-art thermal imaging technology will play a crucial role in equipping British forces in the most challenging of environments. We look forward to working with the MoD to deliver world-leading battlefield technology to British troops, designed, engineered and manufactured here in the UK,” explains Thermoteknix Managing Director, Dr Richard Salisbury.

“Our success will translate into the creation of more UK jobs and provide a boost to the local economy, while also driving British exports to worldwide markets. We are delighted to have been awarded a contract with the MoD during a challenging year for British business suffering from the effects of COVID.”

Thermoteknix designs and manufactures specialist defence and security solutions, including thermal imagers, night vision, fused night vision and target location systems, used by military and civil security forces around the world.

Please visit www.thermoteknix.com/products/defence-security to see our full range of infrared thermal imagers and target location systems.

To arrange an interview, or request further information or images, contact Gina Ghensi at our Press Office via g.ghensi@thermoteknix.com

Effective as of 08 June 2021.

About Thermoteknix (www.thermoteknix.com)

Founded in 1982 and with over 35 years of consistent technical breakthroughs in infrared (IR) thermal imaging and thermal measurement-based hardware, systems, and software application products. Thermoteknix has been driven by its commitment to quality, reliability, and determination to develop solutions that solve customers’ biggest challenges. The company has been awarded the prestigious ‘Queen’s Award for Export Achievement’, in addition to the ‘Queen’s Award for Enterprise (Innovation)’ in 2008 and 2015.

Posted in Thermal Imaging | Tagged clip-on, MOD, Thermal Imaging, Thermoteknix, UK Ministry of Defence | Comments Off

The Precision Rifle Expo 2021 is on for October

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

The 3rd Annual Precision Rifle Expo will be held Oct. 30 – 31, 2021, at the Arena Training Facility in Blakely, Georgia.

The Precision Rifle Expo 2021 is on for October

The 3rd Annual Precision Rifle Expo will be held Oct. 30 – 31, 2021, at the Arena Training Facility in Blakely, Georgia.

Blakely, Ga. (June 2021) – The Precision Rifle Expo (PRE) opens registration for its 3rd annual, two-day event featuring the top brands in the precision, long-range rifle market. This year, the PRE will be held Oct. 30 – 31, 2021, at the Arena Training Facility in Blakely, Georgia. Pre-register now for $35 (and save 30 percent on the entrance fee) or purchase tickets at the door for $50. The PRE is open to the public.

After the cancellation of the 2020 Expo due to COVID-19 restrictions and with attendance from 2019 exceeding expectations from the inaugural year, 2021 promises attendees an outstanding opportunity to access exhibitors in the main tent hall and range locations, get hands-on product experience, choose from a large variety of long-range seminars to attend (normally valued at very high costs), and get to know what the community is all about. Novices and professionals, competitors, and industry experts, all converge on one of the Country’s premier shooting facilities to learn from each other, test their skills, and build long-lasting relationships.

This year, attendees will not have to sign up for any of the classes. Just go to the event and attend the classes of your choosing. Educational classes for both days are included in the ticket price of the event. Classes will be posted on the website and at the event. Educational experiences will bring in specialists teaching the following skill sets: precision handloading, wind reading, position building, competition preparedness, long-range precision shooting introduction, and fundamentals of marksmanship. All those 12 and over are welcome. Those between 12 and 18 must be accompanied by a parent.

The Arena Training Facility is located approximately two and a half hours from the Hartsfield Airport in Atlanta, Georgia, and is centrally located in the Southeastern US. The facility boasts a unique configuration of multiple medium- to long-distance ranges (out to 2,300 yards), multiple climate-controlled classrooms, a main building, and a clubhouse (available first-come, first-serve for exhibitors), all located on 2,300 acres. For those who want to fly into the facility, the Arena has a 5,400 ft. airstrip, and hangar space is available.

This location provides a unique opportunity to see the top equipment used by the best shooters in the country, where attendees can participate in seminars providing valuable education, and try out this equipment at many of the onsite long-distance ranges. In addition, if attendees like what they see, many of the exhibitors will be offering their products for sale onsite.

Exhibitor product categories will include Optics, Actions, Barrels, Reloading, Steel Targets, Hearing Protection, Bags and Support Equipment, Rifle Builders and Manufacturers, Electronics, Stocks/Chassis, and Suppressors. Exhibitors can be found in the main tent or on the range.

Interested in joining the growing ranks of premier companies in the world of precision rifles, optics, accessories, and ammunition as an exhibitor? Contact Phil Cashin at 770-401-3572 or precisionrifleexpo@gmail.com for more information or to reserve your exhibit space.

Click the image to view a video compilation from the 2019 Precision Rifle Expo.

About the Precision Rifle Expo:

The Precision Rifle Expo (PRE) A collection of the top manufacturers and collective talent for all things related to long-range precision rifle shooting. The host location is one of the premier long-range shooting facilities in the Southeastern US – Arena Training Facility. This location provides a unique opportunity to see the top equipment used by the best shooters in the country, where attendees can participate in seminars providing valuable education and try out this equipment at many of the on-site long-distance ranges. https://precisionrifleexpo.com

Posted in Entertainment | Tagged 2021, Arena Training Facility, Blakely, Georgia, Precision Rifle Expo | Comments Off

KNDS records another successful business year

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

KNDS (Amsterdam/The Netherlands) completes a decisive step towards further integration | Nexter

KNDS records another successful business year

Amsterdam, 14 June 2021
The defense technology group KNDS, in which Krauss-Maffei Wegmann (Germany) and Nexter (France) merged to form the leading European company for military land systems, ammunition and related services, has presented its key figures for fiscal year 2020. In 2020, the group achieved remarkable results in an unprecedented context due to the Covid crisis, thus demonstrating its robust business model, its resilience and its strong economic and financial position.
With 3,3 billion euro of order intake, the consolidated order backlog grew to a record 10.6 billion euro. Major orders were the midlife upgrade for the 322 FENNEK vehicles of the Netherlands Army, 24 LEGUAN bridge layers for the German Bundeswehr, 42 JAGUAR, 271 GRIFFON, and 364 SERVAL vehicles related to the SCORPION program, as well as support and services activities for the French army, and CAESAR guns for a new export customer.
The group generated 2,4 billion euro of revenue, while its workforce grew to 8,270 employees.
“In 2020, we met or exceeded all our commercial targets,” said Frank Haun, CEO of KNDS, in assessing the company’s performance. “In addition, Nexter and KMW are integrating faster and more strongly to become the joint pacesetter for key innovations in the field of military land systems. Against this backdrop, however, we see new challenges. For example, the budgets of our most important customers are being significantly impacted by the consequences of the corona pandemic, partly at the expense of the defence budgets. And within defence budgets, significant increases in spending on air systems are emerging, which in turn are putting pressure on much-needed army projects.”

Guillem Monsonis
Head of Communications
Nexter Systems
13, route de la Minière
78034 Versailles Cedex
France
Tel.: +33 7 63 06 63 57
E-Mail: g.monsonis@nexter-group.fr

Dr. Kurt Braatz
Senior Vice President
Strategy and Corporate Communications
Krauss-Maffei Wegmann GmbH & Co. KG
Krauss-Maffei-Str. 11
80997 Munich
Germany
Tel.: +49 89 8140 4675
E-Mail: kurt.braatz@kmweg.de

KNDS (KMW+NEXTER Defense Systems) is the result of the association of Krauss-Maffei Wegmann and Nexter, two of the leading European manufacturers of military land systems based in Germany and France.
KNDS forms a Group of 8,300 employees, with a 2020 revenue of 2.4 billion euro, an order backlog of around 10,6 billion euro and incoming orders of 3,3 billion euro. The range of its products includes main battle tanks, armored vehicles, artillery systems, weapons systems, ammunition, military bridges, customer services, battle management systems, training solutions, protection solutions and a wide range of equipment.
The formation of KNDS represents the beginning of consolidation in land defense systems industry in Europe. The strategic alliance between KMW and Nexter enhances both groups’ competitiveness and international positions, as well as their ability to meet the needs of their respective national army. In addition, it offers to its European and NATO customers the opportunity of increased standardization and interoperability for their defense equipment, with a dependable industrial base.
KNDS headquarters are based in Amsterdam.

Posted in Uncategorized | Tagged CEO, FENNEK, Frank Haun, GRIFFON, KNDS, Krauss-Maffei Wegmann, Scorpion | Comments Off

Galco’s Yaqui Slide!

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

Galco’s Yaqui Slide!

PHOENIX, June 2021
Originally popularized by the late Col. Jeff Cooper of Gunsite Academy fame, the renowned Yaqui Slide was ushered into the modern era of holster design when Galco added a set of independent tension screw adjustments, allowing for a custom fit to the firearm and micro-adjustment of the draw stroke.
The minimalist design and near-vertical carry angle make the Yaqui Slide very fast on the draw while securing the firearm during everyday activity. It’s silhouetted, open-muzzle design is a favorite of those who own multiple barrel lengths of the same gun model. Another seldom-mentioned advantage of the Yaqui Slide is that it doesn’t look like a holster when the firearm is removed, as when entering a “non-permissive environment” for weapons.
Made to fit over 175 different pistols and revolvers, the Yaqui Slide is available in right or left hand designs and in tan or black finishes. Constructed of premium steerhide, it fits belts up to 1 3/4″.
See all of Galco’s belt holsters!

Dealer inquiries:
800-874-2526
dealersales@galcoholsters.com

Galco International, LTD is the designer and manufacturer of the Galco Holsters brand, the premier American-made line of superb-quality holsters, belts and accessories. Encompassing law enforcement, military, defensive and sporting use, the Galco brand utilizes leather, nylon and Kydex to meet the demands of today’s consumers. Women’s holster handbags, tactical slings and hunting accessories round out the line. All Galco products are proudly handcrafted in the USA since 1969.

Galco International | 2019 West Quail Avenue, Phoenix, AZ 85027

Posted in Holsters | Tagged Galco, Yaqui Slide | Comments Off

Support the U.S. Military and Veterans With USA VALOR™ Ammo

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

Winchester proudly supports Folds of Honor with every purchase.

Steadfast in Support of the U.S. Warfighter

With the USA VALOR™ ammunition series, Winchester introduces a limited-edition collection of ammunition celebrating the U.S. Military. This military-inspired ammunition also supports military families as Winchester proudly supports Folds of Honor and its mission.

SEE PRODUCT DETAILS

Winchester Ammunition

600 Powder Mill Road

East Alton, IL 62024

Posted in Ammunition | Tagged Folds of Honor, USA VALOR, Winchester Ammunition | Comments Off

NEW OPTIONS FOR CUSTOM BUGOUT

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

RESCUE TACTICAL EVERYDAY CARRY SURVIVAL OUTDOOR HUNTING CUTLERY

Benchmade Knife Company.
300 Beavercreek Rd. Oregon City, OR 97045
Contact Us: 1-833-557-2526

Posted in Knives and Tools | Tagged Benchmade, Bugout | Comments Off

TrueTimber® Hosts Edwin Evers Father’s Day Sweepstakes

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

TrueTimber® Hosts Edwin Evers Father’s Day Sweepstakes

INMAN, S.C. – June 14, 2021 – TrueTimber announces Edwin Evers Father’s Day Sweepstakes with tremendous list of prizes from TrueTimber, General Tire, OPTIMA Batteries®, PowerStop® Brakes and Tacklewebs®. One grand prize winner will be randomly selected following the promotion period which ends June 20, 2021 at 11:59 p.m. EST.

“Edwin has been a long-time member of the TrueTimber team as one of our brand ambassadors and this is such an awesome sweepstakes to pair up with Father’s Day,” said TrueTimber CEO Rusty Sellars. “It is great to see so many of Edwin’s other sponsors jump on board for such a huge prize pack and we are really excited to crown a winner.”

To enter, fans need to follow TrueTimber, Edwin Evers, General Tire, OPTIMA Batteries, PowerStop Brakes and Tacklewebs on Instagram or Facebook in addition to tagging at least one friend in the entry post on TrueTimber’s Instagram or Facebook page. The entry post will go live on the TrueTimber Facebook and Instagram pages, today at 3:30 p.m. EST. For an additional chance to win, fans can enter on both platforms.

Father’s Day Sweepstakes Grand Prize Pack

$250 TrueTimber Gift Card
TrueTimber Hat Signed by Edwin Evers
Tire Certificate for Any 4 General Tire Branded Tires (Valued up to $1,835.96)
(3) OPTIMA Bluetop Group 31 Batteries (MSRP $1,079.97)
PowerStop Brakes Z36 Truck & Tow Brake Upgrade Kit – Rotor and Pads (MSRP $550.00)
Variety of Tacklewebs and Coolerwebs Accessories (MSRP $165.91)

This giveaway is open to continental U.S. residents only and entrants must be age 18 or older. Other restrictions apply. For more information and additional coverage on the giveaway, fans are encouraged to follow the TrueTimber, Edwin Evers and all the involved partners. To see full terms and conditions, please visit: TrueTimber.com/Giveaway.

To learn about the entire TrueTimber product line and see all available patterns, visit

TrueTimber.com.

About TrueTimber

Founded in 2005, TrueTimber is based in Inman, South Carolina and is the most realistic, performance-driven camouflage brand in the industry. TrueTimber offers a wide variety of clothing items and accessories, featuring 27 distinct camo patterns that perfectly blend with their surroundings. The company spends countless hours researching, testing and seeking new technology to produce the most effective and lifelike camouflage patterns possible. TrueTimber products can be found in retailers across the United States and Canada, and it continues to be one of the fastest growing camouflage companies in the world. For more information about TrueTimber, visit TrueTimber.com.

Posted in Promotions | Tagged Father's Day, True Timber | Comments Off

NDIA survey shows what’s next for business as pandemic fades

Posted on Tuesday, 15 June, 2021 by twobirdsflyingpub

NDIA survey shows what defense businesses face as the pandemic recedes

ARLINGTON, VA – As the COVID-19 pandemic starts to retreat in the United States., businesses of the defense industrial base are finding where they are now and what lies ahead, so says the results of a pulse survey from the National Defense Industrial Association, done under the Vital Signs project of the Strategy & Policy Department and released Monday, June 14.

The survey of more than 200 NDIA members was conducted over several weeks in April and May, and revealed many points, including:

• 18.5% of respondents said their businesses have returned to normal operations, while 31.5% said they do not expect a return to a normal level for more than six months.

• Small businesses in the defense industrial base — particularly those with 25 or fewer employees —reported large negative effects on their businesses due to the pandemic far more than larger businesses. When compared to U.S. small businesses that do not specialize in defense, these businesses were nearly 32% less likely to experience large negative effects, but about 19% more likely to experience moderate negative effects.

• 34.7% of businesses reported that COVID-19 had a major impact to revenue expectations in July 2020, which has fallen to 19.3% as of May 2021.

• The four areas of operations most affected by the COVID-19 crisis are revenue expectations (41.7%), confidence in supply-chain partners (31.7%), availability of workforce (30.5%) and ability to perform on contracts (29.6%).

• At 41%, availability of employees to work was the most common factor affecting operating capacity. Physical distancing of customers or clients and limits on the number of concurrent customers or clients was the second most responded factor at nearly 10%.

The complete survey results are available here.

NDIA conducted two surveys in 2020 at the Defense Department’s request to gauge how business, particularly small business, was doing during the pandemic. NDIA did this survey on its own but does plan to share the information with interest officials at the Pentagon, said Corbin Evans, principal director of strategic programs. “Defense is such a broad industry with many facets, and many of its companies and employees are our members. We felt another survey was in order to understand what is going on now compared to the start of the pandemic, but also what lies ahead for these companies,” he said.

For media queries or to speak with survey leads Corbin Evans or Nicholas Jones, please contact Evamarie Socha at the information below.

At the Heart of the Mission Since 1919

Evamarie Socha

Director of Public Relations and Communications

2101 Wilson Boulevard, Suite 700, Arlington, VA 22201

(703) 247-2579 | Cell (703) 472-3806 | NDIA.org

Posted in NDIA | Tagged business survey, NDIA | Comments Off

SIG SAUER ZULU6 10X30 mm Image Stabilized Binoculars

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

In 2021 SIG expanded its outstanding electro optics portfolio with the introduction of two image stabilized binoculars. The ZULU6 10×30 mm and 16×42 mm are impressive in every respect. In this review, I explore the ZULU6 10X30 mm offering from SIG SAUER.

Read my review…

View this document on Scribd

Posted in Optics, Optics | Tagged 10X30m image stabilization, Binoculars, SIG SAUER, ZULU6 | Comments Off

Cambridge-based tech company designs Augmented Reality Tactical Interface Module (ARTIM) that transforms night-time soldier combat

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

Cambridge company Thermoteknix designs new Augmented Reality (AR) technology to transform night-time soldier combat

CAMBRIDGE, UK, FOR IMMEDIATE RELEASE: Thermal imaging and night vision specialist Thermoteknix has launched a new Augmented Reality (AR) Tactical Interface Module, or ARTIM for short, with enhanced real-time data sharing capabilities, delivering superior night-time surveillance and combat capabilities to troops on the battleground.

ARTIM delivers real-time Augmented Reality (AR) displayed via Night Vision Goggles (NVGs) fitted with its award-winning Thermal Clip-on System.

The Thermal Clip-on System enhances night-time vision, surveillance and detection. The UK MoD already has precured £3.2 million worth of the thermal imaging technology this month for the British Army. (Read MoD release here…https://des.mod.uk/night-vision-goggles-british-army/)
ARTIM integrates with existing digitalised soldier systems and secure communication networks to offer real-time data sharing and instant situational awareness for collaboration across teams and agencies. (More images are available.)
LEARN MORE: https://www.thermoteknix.com/products/defence-security/artim
ARTIM is compatible with Android Team Awareness Kit (ATAK). ATAK is a secure, mobile, interactive geospatial tool, used the world over, by military and law enforcement agencies around the world. ATAK connects multiple users people or teams on the go to, providing real-time, geo-referenced navigation and intuitive interface for sharing live information and identifying teammates, targets and route points.
The addition of ARTIM enhances existing thermal imaging capabilities available with the Thermoteknix ClipIR XD Thermal Clip-on Systems by adding ultra-low latency Augmented Reality (AR) technology, while also providing power to the ClipIR XD for up to 24 hours of operation.
Military forces and civilian law enforcement agencies have integrated ClipIR XD Thermal Clip-on Systems into their night-time resources, taking advantage of its exceptional enhanced situational awareness and increased threat detection capabilities at low light or no light situations.
ClipIR XD converts existing monocular or binocular night vision devices by fusing thermal imaging and night vision technologies to provide superior tactical advantages compared to standard night vision or thermal imaging alone.
The UK MoD is equipping soldiers with the state-of-the-art ClipIR XD Thermal Clip-on Systems (TCOS) from Thermoteknix for the British Army, to improve soldiers’ abilities to fight further, faster and smarter.
See MoD press release here…. https://www.thermoteknix.com/news/thermoteknix-selected-by-uk-ministry-of-defence-mod-to-supply-clipir-xd-e-thermal-imaging-clip-on-systems
“Thermoteknix is committed to delivering state-of-the-art thermal imaging technology that is designed and manufactured in the UK and plays a crucial role in equipping troops around the world, who operate in the most challenging of environments,” said Thermoteknix Managing Director, Dr Richard Salisbury.
“ARTIM is the latest technology from our R&D team which is transforming battlefield technology and we continue to develop world-leading solutions that maintains the UK’s military technology advantage.”
Thermoteknix designs and manufactures specialist defence and security solutions, including thermal imagers, night vision, fused night vision and target location systems, used by military and civil security forces around the world.
Please visit www.thermoteknix.com/products/defence-security to see our full range of infrared thermal imagers and target location systems.
To arrange an interview, or request further information or images, contact Gina Ghensi at our Press Office via g.ghensi@thermoteknix.com.

About Thermoteknix (www.thermoteknix.com)

Posted in Night Vision Technology | Tagged augmented reality, Augmented Reality Tactical Interface Module, Thermoteknix | Comments Off

SLIDES: One Pistol, Multiple Uses + New P938 SAS Slides

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

Did you know that you can customize your SIG SAUER pistol for almost any scenario by just swapping out the slide?

SIG SAUER factory replacement slides are designed for you to adapt your pistol to multiple shooting situations. Throw a PRO-CUT RX slide on for a trip to the range and then swap it out with the 3.6″ version for everyday carry. It’s that simple. No need for a gunsmith or armorer.

P320 Slides

Choose from a combination of PRO-CUTs, optic-ready slides, ROMEO1Pro slides and standard slides in multiple colors and sizes.

Col21 Verified Reviewer

★★★★★

“Tremendous upgrade”

SHOP NOW

P365 Slides

Choose from a combination of optic-ready slides, ROMEOZero slides, SAS slides or standard slides in multiple colors and sizes.

Jorge C. Verified Buyer

★★★★★

“Easy to install! Love the look!”

SHOP NOW

P226 Slides

Choose from the new optic-ready PRO-CUT slide, ROMEO1Pro slide (also a LEGION version), or a standard slide.

Phil Verified Buyer

★★★★★

“Great addition to the P226…a must have!”

SHOP NOW

P229 Slides

Choose from the ROMEO1Pro slide, a LEGION Gray ROMEO1Pro slide or the standard LEGION gray slide.

Gary S. Verified Buyer

★★★★★

“Even better than I expected!”

SHOP NOW

NEW: P938 SAS Slides

Convert your P938 to the SIG Anti-Snag configuration an conceal your pistol more comfortably. The revolutionary sighting system eliminates the need for above slide sights, creating a smooth top and a snag-free draw.

Randy B. Verified Buyer

★★★★★

“A vast improvement in non snag draw and reholster.”

BUY NOW

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING

Posted in Accessories, pistols | Tagged SIG SAUER, slides | Comments Off

KUSA: KOMRAD. FREE SHIPPING.

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

FREE SHIPPING

IS YOUR KOMRAD READY
TO DEFEND YOUR HOME?

FOR AMERICANS. BY AMERICANS.

KOMRAD – 12GA Firearm

$1,250.00

SHOP NOW

Kalashnikov USA

3901 NE 12th Ave #400

Pompano Beach, FL 33064

Posted in shotguns | Tagged 12 gauge, Kalashnikov USA, KOMRAD | Comments Off

GET OUTDOORS WITH THE RIGHT GEAR

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

RESCUE TACTICAL EVERYDAY CARRY SURVIVAL OUTDOOR HUNTING CUTLERY

Benchmade Knife Company.
300 Beavercreek Rd. Oregon City, OR 97045
Contact Us: 1-833-557-2526

Posted in Knives and Tools | Tagged Adamas, Bailout, Benchmade, Bugout | Comments Off

Lucas Oil Outdoor Line Joins Optics Planet

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

June 9, 2021

(Corona, CA) – Lucas Oil Outdoor Line, makers of the best quality outdoor industry lubricants and cleaning products available, is pleased to team up with online retailer OpticsPlanet.
OpticsPlanet was founded in 2000 and is one of the largest online retailers in the US. They provide customers with an impressive variety of products for hunting, shooting, outdoor sports, military/law enforcement, apparel and optical needs. Consumers can now find the full line of Lucas Oil Outdoor products available at OpticsPlanet.com.
In 2018, OpticsPlanet was recognized for the 12th straight year by Internet Retailer Magazine as one of the top 200 e-retailers in the United States. OpticsPlanet, Inc. has also been recognized by Inc. Magazine as one of the top 5,000 fastest growing companies in the country and the Better Business Bureau has ranked them as A+.
Other stores in OpticsPlanet, Inc.’s portfolio include OpticsPlanet.com, Dvor.com– the world’s first members only store devoted to gear – EyewearPlanet.com, Tactical-Store.com and LabPlanet.com. For more information, visit http://www.opticsplanet.com.”
“OpticsPlanet is excited to partner with Lucas Oil, one of the oldest and most respected brands in the lubrication industry,” Says Alex Royzen, Senior Director of Merchandising and Supply Chain Manager. “Lucas Oil represents our continued expansion in servicing all aspects of our customer’s interests, whether that be firearms, automotive or marine.”
“We are thrilled to be teaming up with OpticsPlanet,” says Lisa Marie Young, Business Development Manager for Lucas Oil Outdoor Line. “We value forging relationships with like-minded companies and sharing mutual support. They bring unique experience and resources to the table that will help us to better reach and serve consumers.”
Lucas Oil has been producing the best line of lubricants and additives available for over 30 years. They recently launched the Lucas Oil Outdoor Line for the hunter, sportsman or competitive shooter who is serious about their equipment and maintaining it properly. Lucas Oil’s unique proprietary formulas clean, protect and enhance the performance of firearms better than any other product on the market.
For more information about Lucas Oil Outdoor Line, visit LucasOil.com.

About Lucas Oil:
Forrest and Charlotte started Lucas Oil Products with the simple philosophy of producing only the best line of lubricants and additives available anywhere. Since its inception, Lucas has steadfastly adhered to this corporate objective. Through innovative product research and development, along with aggressive marketing programs, Lucas has established itself as a top producer of oil, grease and additive products. The Lucas success story has been built upon hard work, an unparalleled line of premium products and an unwavering commitment to customer satisfaction. This single formula for success will continue to guide Lucas Oil Products as it grows in the years to come.

Posted in Cleaning Systems | Tagged Lucas Oil Outdoor, Optics Planet | Comments Off

Bring Home the Fight for the Everglades

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

FIREARMS ACCESSORIES APPAREL+GEAR SALE COMMS

It’s been more than a year since our trip to Florida to learn about Mike Kimmel and his fight against invasive species in the Florida Everglades. To say that he’s been busy would be putting it lightly; if you’ve been following him on social media, you’ve seen the results of his work almost daily. We followed up with him on a recent call, and he’s got some better news from the ‘Glades. With a rebound in native wildlife, a decrease in larger Burmese Pythons, and a coordinated, expanded effort to control other invasive species, there’s progress being made in the Florida Everglades. Head over to Magpul COMMS for the full update.

Magpul Tejas Gun Belt - "El Original" Python

While working with Mike, we saw the impact he and others like him are making in the Florida Everglades. We decided to make use of some the Burmese Pythons he’s captured by bringing them to our hand-made Tejas Gun Belt line. As a result, we’re introducing the Magpul Tejas Gun Belt – “El Original” Python while supplies last. It’s a beautiful, functional belt that showcases the individuality of each snake hide and helps give back to support the fight against invasive species in Florida.

Tanned in Florida and handcrafted in Texas, each belt is unique, and includes a reinforcement layer of 100% North American bullhide to create a premium stretch-and sag-free performance. This belt comes with our sleek profile, brushed antique-silver buckle that includes branded tool-free fasteners for easy removal.

GET YOURS NOW

877-462-4785
communications@magpul.com

Posted in Apparel | Tagged Burmease, MAGPUL, Python | Comments Off

Hoppe’s Shooters Score Big Wins at USPSA 2 Gun Nationals

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

Todd Jarrett Takes 2nd Place and Nicholas Realuyo Named High Junior

OVERLAND PARK, Kan. – June 10, 2021 – Hoppe’s, the No. 1 name in gun care products, congratulates sponsored shooters Todd Jarrett and Nicholas Realuyo on bringing home top wins at the recent USPSA 2 Gun PCC and Pistol MultiGun Nationals, held June 4-6 in Talladega, Alabama. In the inaugural match, Jarrett finished second Overall in the Open Division while fellow teammate Realuyo was named Top Junior.

Throughout the three-day match, more than 200 shooters took on 11 stages of fire, each designed to test their ability in both speed and accuracy. Amongst the stacked field of competitors, Jarrett was able to stay near the top of the leaderboard, finishing in second place while also being named High Senior.

“Well, I didn’t win but I’ll take it,” Jarrett joked while reflecting on the match. “Overall, I thought the stages were extremely well done and coming from the 3-Gun world, I thought each was well thought out and challenging. And while I fell a little short of my goal, to me the excitement around this match and its overall success is a strong indicator that more major matches like this will be coming back soon. And perhaps more importantly, 2-Gun matches are alive and well.”

Leading up to the match and during, Jarrett relied on numerous Hoppe’s products to keep his gear running like new.

“For consistency and durability, there’s no other choice but Hoppe’s,” Jarrett said. “It’s important to ensure that my firearms are well lubricated to help give me that competitive edge. With most PCC guns being blowbacks, they get dirty fast, and keeping them running is where Hoppe’s outshines the field.”

Also competing in this year’s match was Hoppe’s junior shooter, Nicholas Realuyo. Jarrett and Realuyo, who were squadded during the match, have been close friends since Realuyo was just 8 years old. This positive relationship, along with Realuyo’s hard work and determination, helped pave the way to him winning the distinguished honor of Top Junior while placing 11th overall in the Open Division.

“I first met Nicholas and his brother several years ago at a junior camp I was teaching, and it was evident that both had amazing talent at such a young age,” Jarrett said. “We’ve continued to work on the range together whenever we can, and it’s been fun to see their skills develop. Being on the same squad, it was definitely a benefit to discuss stage plans and feed off with them as I would seasoned veterans. As a mentor and a friend, I was excited to see Nicholas win his first Junior National Championship.”

About Hoppe’s

In 1903, Frank August Hoppe mixed nine chemicals and created the world’s most effective gun cleaner. As a well-trained young soldier, Frank knew that gun care went far beyond just a clean rifle, but actually helped to ensure his safety while on the front lines of battle. Since that time, Hoppe’s has emerged as the leading gun care company, having grown along-side hunters, shooters and soldiers who depend on their firearms every day. It has remained the most trusted name in gun care by advancing and evolving technologies to meet those needs. From the ever popular and versatile No. 9 and the quick and easy BoreSnake, to the marvel of efficiency we call Gun Medic, Hoppe’s is the only name you need to know for firearm cleaning and protection. For more information, visit www.hoppes.com.

Posted in Cleaning Systems, competitions | Tagged Hoppe's, Todd Jarrett, Vista Outdoor Brands | Comments Off

Virtual Career Fair

Posted on Monday, 14 June, 2021 by twobirdsflyingpub

Accelerate Your Next Career Move!

EMPLOYERS

What You’ll Get:

A fully customizable virtual booth, complete with your open positions and other information about your organization (including video).
During the live event you’ll receive up to 4 recruiter seats, depending on your package choice, for your team to engage in one-on-one chats with quality candidates.
You’ll be able to rate your interactions and record notes about each candidate to facilitate easy post event follow-up.
Silver and Gold Exhibitors will receive the resumes of all registered candidates.

JOB SEEKERS

How it Works:

Register for the event and enter background information for the employers such as your resume, experience, education and job preferences.
During the live event browse employer booths and learn more about their culture, benefits, opportunities and more.
If you are interested in connecting, simply request a chat and you’ll be connected in a private one-on-one chat with a company recruiter.
You’ll be able to rate your chats and leave yourself notes for follow up.

Job Seekers:
this is an AFCEA member-only event.

Not a member? Join now to gain access!

Employers – sign up for your booth

Questions? Email Sean McGowan

AFCEA International

4114 Legato Road, Suite 1000, Fairfax, VA 22033-4002

703-631-6100

Posted in Employment | Tagged AFECA, job fair | Comments Off

MIL-SPEC ATACR 4-20×50 F1 SELECTED FOR USSOCOM R-VPS CONTRACT

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

Nightforce Optics is proud to announce that another variant of the ATACR product line has been selected to fill the Ranging – Variable Power Scope (R-VPS) component of the Miniature Aiming Systems – Day Optic (MAS-D) Program.

The MIL-SPEC ATACR™ 4-20×50 F1 will be integrated as the Mid-Range and the Designated Marksman solutions for US Special Operations Command’s current and future anticipated Semi-Automatic Sniper Weapon Systems. The R-VPS will round out a complete family of Variable Power Scopes awarded to Nightforce Optics within the MAS-D Program.

As part of a life cycle replacement program and capabilities enhancement, the Nightforce MIL-SPEC ATACR 4-20 is optimized to provide improved target detection and dentification, as well as hit probability, for engagements out to 1200m.

“We are both proud and humbled to realize another Nightforce ATACR model selection within the VPS family of scopes for USSOCOM. While a new benchmark for us, the real benefit is the continuity it brings to the end user. Now, regardless of weapon system, they will have commonality in adjustment features and ancillary components”, said Nightforce’s MIL-GOV-LE Business Development Manager, Tod Litt.

The Nightforce MIL-SPEC ATACR 4-20 offers excellent performance in intermediate range target detection as well as reliable mechanical adjustment. The optic feature Nightforce’s exceptional ED glass, 0.1 Mil-Radian adjustment value for both windage and elevation, the Horus Vision TREMOR3 reticle, and a tan, hardcoat anodized finish. Like the previous VPS Program solutions the R-VPS is provided as a system, utilizing a purpose-built Nightforce scope mount and laser range finder integration platform. When employed as a complete solution, the SOF end-user’s ability to detect, range, and receive a firing solution correlates well with the semi-automatic weapon capability it is intended to enhance.

The new optics are to augment multiple systems in the SOCOM inventory and are intended to support the MRGG (Mid-Range Gas Gun) once it is fielded. For more information on Nightforce Optics, please visit http://www.nightforceoptics.com, or for more details on military contracts, email Glenn Lass, MIL-GOV-LE Program Manager at glass@nightforceoptics.com.

Posted in Optics, Optics | Tagged ATACR, MAS-D Program, Nightforce Optics, USSOCOM | Comments Off

FN Wins U.S. Army Contract to Build M240 Machine Guns and Spare Receivers

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

(McLean, VA – June 10, 2021) FN America, LLC is pleased to announce that the company has been awarded a firm-fixed-price contract to supply the U.S. Army with M240 series machine gun variants and spare receivers. The contract, awarded through 2026, is multi-faceted and will support both the U.S. Army and other Department of Defense (DoD) programs.

“The U.S. Army contract for the M240 machine gun was the first military contract FN was awarded and the first to be produced from our production facility in South Carolina,” noted Mark Cherpes, President and CEO for FN America, LLC. “We’re incredibly honored to continue our relationship with the Army, supporting them with high quality and reliable weapon systems for our servicemen and women.”

The M240 general purpose machine gun, derived from the FN MAG 58, was adopted by the U.S. military in the late 1970s, and has been in continual service since being introduced. This contract provides a procurement vehicle for the US Army to purchase multiple variants of the M240 machine gun, including the M240 coaxial, the M240B, M240L, M240D and M240H models.

Throughout its history, FN has been one of the largest suppliers of small arms to the U.S. military and continues to develop innovative, future technology. In addition to the M240 and its variants, the company currently holds contracts for the FN M249 lightweight machine gun; the FN MK 46, MK 48, MK 17, and MK 20 SSR for USSOCOM, and various other contracts.

For more information about FN’s military product line or current U.S. military contracts, please visit www.fnamerica.com.

The World’s Most Battle-Proven Firearms.® | FN America, LLC, the U.S. subsidiary of Belgium-based FN Herstal, S.A. provides U.S. military, law enforcement and commercial customers with a complete range of state-of-the-art, groundbreaking solutions developed around small caliber firearms and associated ammunition under the FN brand name.

FN Herstal is the Defense & Security entity of Herstal Group that also includes a Hunting & Sports Shooting entity (Browning and Winchester Firearms’ brand names) and operates globally.

FN product lines include portable firearms, less lethal systems, integrated weapon systems for air, land and sea applications, remote weapon stations, small caliber ammunition, as well as modern and cutting-edge solutions to provide enhanced combat, logistics, maintenance and communication capabilities.

In addition to FN America – headquartered in McLean, VA, with manufacturing operations in Columbia, SC –, FN Herstal is the parent company of FNH UK in the UK and Noptel (optoelectronics) in Finland.

For more information on FN’s latest products, visit us at www.fnamerica.com

Posted in Weapon systems | Tagged FN, FNH, M240, U.S. Army | Comments Off

SIG SAUER Custom Works Introduces P320 XCOMPACT and P365XL Spectre Series Pistols

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

NEWINGTON, N.H., (June 10, 2021) – SIG SAUER is pleased to introduce the Spectre series pistols from SIG SAUER Custom Works. The P320 XCOMPACT Spectre and P365XL Spectre pistols feature the new Laser Engraved LXG Grip Module, and custom distressed slide, combined with the popular XSERIES features, delivering a custom concealed carry experience straight from the SIG SAUER factory.

“This latest creation form SIG Custom Works brings an entirely new level of customization to our two most popular lines of pistols – the P320 and P365,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, Commercial Sales, SIG SAUER, Inc. “The all new LXG grip module is laser engraved in-house, and the custom pattern on all four sides delivers an aggressive, stylish texture for a stronger, more controlled grip. The custom slides are distressed with the exclusive Spectre XSERIES lightening cuts, making the Spectre series of pistols truly unique, and a real standout for concealed carry.”

The SIG Custom Works Spectre series pistols are 9mm striker-fired pistols, featuring the all-new LXG Grip Module with laser engraving on all four sides, a deep trigger undercut, and extended beavertail, complemented by the Custom Works Spectre slide with distressed finish and custom Spectre XSERIES lightening cuts. Both pistols include XSERIES flat triggers, XRAY3 Day/Night sights, and custom optic ready slides.. The SIG Custom Works P320 Spectre is direct-mount compatible with the SIG SAUER Electro-Optics ROMEO1Pro , the soon to be released SIG SAUER Electro-Optics ROMEO2, Delta Point Pro, and RMR Reflex Optics, and ships with (2) 15-round steel magazines. The SIG Custom Works P365XL Spectre is compatible with the SIG SAUER Electro-Optics ROMEOZero or RMSC sights, and ships with (2) 12-round steel magazines. Each Spectre pistol comes with a SIG Custom Works Challenge Coin and Certificate of Authenticity.

P320 XCOMPACT Spectre:

Overall length: 7.4 inches
Overall height: 5.3 inches
Overall width: 1.3 inches
Barrel length: 3.9 inches
Sight Radius: 5.8inches
Weight (w/magazine): 26 oz.

P365XL Spectre:

Overall length: 6.6 inches
Overall height: 4.8 inches
Overall width: 1.1 inches
Barrel length: 3.7 inches
Sight Radius: 5.6inches
Weight (w/magazine): 20.7 oz.

The SIG SAUER P320 Spectre and P365XL Spectre are now shipping and available at retailers. To learn more about the SIG SAUER P320 and P365XL Spectre series pistols, or watch the P320 Spectre series and P365XL Spectre series product videos with Phil Strader visit sigsauer.com.

About SIG SAUER, Inc.

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 2,300 employees across nine locations. For more information about the company and product line visit: sigsauer.com.

Posted in pistols | Tagged Custom Works, P320 XCOMPACT, P365XL, SIG SAUER, Spectre Series | Comments Off

ECA GROUP is ready for assembly phase of programme to extend capabilities of the Latvian Navy’s mine countermeasures vessels

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

ECA GROUP

Toulon, 10 June 2021
ECA GROUP today announces the fulfilment of the first milestone within the modernization programme of 3 mine countermeasures vessels belonging to the Latvian Navy, 8 months after winning the contract for the modernisation of the Navy’s MCM capabilities. This first milestone consists of disassembling the legacy equipment of mine countermeasures vessels. Following this successful phase, and the Critical Design Review of ship architecture, teams will begin installing the new, upgraded equipment in October 2021.
ECA GROUP will install and configure its UMIS Unmanned Mine Countermeasures Integrated System on the 3 vessels. The UMIS Toolbox is a comprehensive suite of state-of-the-art technology for unmanned, mine clearance operations, while removing the need for the ship to enter the minefield (stand-off concept). For the Latvian Navy, ECA GROUP will replace the vessels’ conventional mine detection systems based on a hull sonar with a more compact, mobile and evolutive unmanned system UMIS, consisting of AUV (Autonomous Underwater Vehicle) A18-M drones fitted with the latest generation ECA GROUP synthetic aperture sonar UMISAS for detection, and several underwater robots, the Seascan MK2 and K-STER C for mines identification and neutralisation. The new Ultra Short Baseline positioning system installed in place of hull sonar enables not only tracking but also acoustic communication, replacing the previous acoustic modem which had to be launched from the deck.
ECA GROUP will modify the vessels to accommodate the new equipment with the support of its subsidiary MAURIC, specialized in naval architecture, and Latvian industrial partners, in order to install these new generation mine countermeasures systems. Several Latvian companies have been consulted for the supply of equipment and coordination of on-site activities and works. Other Latvian companies will also be consulted for procurement of racks, trolleys, launch and recovery systems of drones. MAURIC will make a valuable contribution in ensuring the operability of the equipment installed on board, guaranteeing enhanced performance of the ships following their upgrades.
An integral part of the upgrade by ECA GROUP and MAURIC will be the complete renewal of the Combat Room to integrate cabinets and consoles necessary for operating the new navigation systems (WECDIS, USBL positioning system and Inertial Navigation System by iXblue), new Autopilot (by SIREHNA), and ECA GROUP’s UMISOFT software suite for Mission Management, Data Management and Drone Control. A new Iridium and Wi-Fi antenna will be installed on each ship for communicating with the A18-M drone at the surface.
Naval forces around the world are faced with economic restrictions and the need to rationalise resources whilst enhancing their capabilities in order to fulfil their increasingly challenging missions of fighting threats and protecting populations.
By upgrading mine warfare equipment on existing vessels, ECA GROUP brings state of the art capabilities to navies while enabling them to prolong the life of their fleet already in service. (In the case of the Latvian Navy, they had acquired their vessels from the Royal Netherlands Navy in 2006.) The UMIS Toolbox can also be installed on other models of conventional mine countermeasures vessels or on ships that are not used for mine countermeasures.
ECA GROUP offers this modernisation solution to all navies that intend to keep and optimise their conventional mine countermeasure vessels or consider the acquisition of pre-owned vessels.

Posted in DSEI 2021 | Tagged ECA Group, Latvia, mine sweepers | Comments Off

PGM PRECISION at SOFINS SHOW

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

From 29 June to 1 July 2021

in MARTIGNAS SUR JALLE (South West France)

Our booth is C 27 on the central hall.

The show is authorized for arms professionals.

To require access click here.

Posted in SOFINS | Tagged PGM Precision, SOFINS | Comments Off

Brownells Offers Limited Edition Henry Rifle

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

Brownells Offers Limited Edition Henry Rifle

GRINNELL, Iowa (June 10, 2021) – Brownells will offer a limited number of the special commemorative Henry Golden Boy lever action .22 LR rifles made to honor Iowa’s own Harold “Pie” Keller.

A US Marine during World War II, Keller participated in the iconic American flag raising on Mount Suribachi during the Battle of Iwo Jima. But his involvement in the important historical event was accidentally overlooked until very recently.

The commemorative rifles are exclusively distributed by Crow Shooting Supply with Brownells receiving 10 for sale on Brownells.com and an additional 10 for sale in the Brownells Retail Store in Grinnell, IA – only 17 miles from Keller’s hometown of Brooklyn, IA.

The rifle is #100-042-669 at Brownells.com and retails for $699.99.

Each Harold “Pie” Keller commemorative Henry lever action has a walnut stock engraved with an image of Keller atop Mount Suribachi with the famous flag raising in the background. The date “February 23, 1945” appears above the design with Keller’s name in a flowing scroll banner beneath the image.

Henry Repeating Arms will contribute $50 of every rifle sold to the Brooklyn Community Foundation 501(c)(3), a local organization raising money to pay for a monument to honor Keller.

In addition, Henry Repeating Arms will auction the “Pie” Keller commemorative rifle with serial number 001 on Gunbroker.com starting at 9:30 am EST on June 14, 2021, which is also Flag Day. Proceeds of that auction will also be used to support erecting the monument to Keller.

“The fact that ‘Pie’ was misidentified for over 76 years is a testament to the man’s humility,” said Anthony Imperato, President and Owner of Henry Repeating Arms. “He never came forward as one of the flag raisers, not even to his kids, and I look forward to visiting the memorial to pay my respects to this incredible man in person.”

“We are honored to recognize a true hometown hero who made history by raising the American flag on the island of Iwo Jima more than 75 years ago,” said Pete Brownell, Chairman of Brownells. “The image of the flag-raising has become a symbol of valor and unity in the United States. It’s fitting to have “Pie” Keller’s heroics memorialized on another American icon, the Henry rifle, as it benefits a new memorial to Brooklyn, Iowa’s hometown hero. “

Besides the rifles for sale on Brownells.com and in the Brownells Retail Store, the rest of the limited run of only 100 rifles are available to wholesale customers through Crow Shooting Supply.

To see the Harold “Pie” Keller commemorative Henry rifles, visit www.Brownells.com

About Henry Repeating Arms

Henry Repeating Arms is one of the leading rifle and shotgun manufacturers in the United States and a world leader in the lever action category. The company motto is “Made in America, Or Not Made At All,” and its firearms come with a lifetime guarantee backed by award-winning customer service. The company is also known for its charitable endeavors under its Guns For Great Causes program, which focuses on sick children, both individual cases and children’s hospitals, veteran organizations, and Second Amendment and wildlife conservation organizations. The company currently employs over 500 people and has 250,000 square-feet of manufacturing space between its headquarters in Rice Lake, Wisconsin and second facility in Bayonne, New Jersey. The company is named in honor of Benjamin Tyler Henry, who invented and patented the first successful lever action rifle in 1860, which is America’s unique contribution to international firearms design and is one of the most legendary, respected and sought-after rifles in the history of firearms. Visit Henry Repeating Arms online at www.HenryUSA.com, on Facebook at www.facebook.com/henryrepeating, and Instagram @Henry_Rifles.

About Brownells

Serious About Firearms Since 1939™, Brownells is the world’s leading source for guns, gun parts and accessories, ammunition, gunsmithing tools and survival gear. With a large selection of both common and hard-to-find items, and an extensive collection of videos, articles, and gun schematics, Brownells is the expert for everything shooting-related. Committed to maintaining our great traditions, Brownells has more, does more and knows more – and guarantees it all, Forever. For more information or to place an order, call 800-741-0015 or visit Brownells.com

Posted in Promotions | Tagged .22LR, Brownell's, Henry Golden Boy, Henry Rifle, lever-action | Comments Off

FREE Webinar: Suicide Prevention with NSSF and AFSP

Posted on Friday, 11 June, 2021 by twobirdsflyingpub

Join us on June 21, 1 p.m. EDT

Have a Brave Conversation. A Discussion on Suicide and Suicide Prevention with NSSF and AFSP | 2021 Retailer/Range Compliance Series
Monday, June 21 – 1 p.m.

Nearly two-thirds of all firearm deaths are suicides, and these numbers increase when we look at suicide among veterans. This session will review how FFLs can get involved and recognize the warning signs of someone suffering a mental health crisis. After this training, FFLs will better understand the important role our industry can play to help prevent suicides, and prevent unauthorized access to firearms.

Reserve Your Spot

Upcoming Sessions

NFA Compliance | 2021 Retailer/Range Compliance Series
Monday, July 9 – 1 p.m.

With more and more FFLs engaging in the sale of NFA regulated inventory it is critical that we review the regulations that govern the transfer and sale of these items. During this training, NSSF’s expert compliance consultants will help FFLs navigate the compliance landscape when dealing with serialized inventory that is subject to NFA compliance regulation.

Reserve Your Spot

A Review of NICS and the Background Check Process | 2021 Retailer/Range Compliance Series
Monday, July 26 – 1 p.m.

In this training, we will look at how FBI NICS deals with the information you and your customer document on ATF Form 4473 to determine whether the transfer of a firearm should occur. The background check process can be complex and it is critical that FFLs understand the myriad scenarios that can occur when conducting a background check. Correctly performing and completing a background check is critical to remaining compliant and in helping do your part to keep firearms out of the wrong hands.

Reserve Your Spot

SHOT Show • 11 Mile Hill Road • Newtown, CT 06470-2359
Copyright © 2021, All rights reserved.

National Shooting Sports Foundation • 11 Mile Hill Road • Newtown, CT 06470 update subscription preferences

Posted in NSSF/NRA | Tagged NSSF, suicide prevention | Comments Off

SIG SAUER Commemorates U.S. Army’s Birthday with Army Ranger Series Videos

Posted on Thursday, 10 June, 2021 by twobirdsflyingpub

NEWINGTON, N.H., (June 9, 2021) – SIG SAUER, Inc. is proud to present a new four-part video series to commemorate the upcoming birthday of the U.S. Army on Monday, June 14th, and honor the prestigious U.S. Army Rangers with an inside look at the 2021 Best Ranger Competition.
“This year SIG SAUER was afforded the incredible opportunity to present custom M17 pistols as the official trophy pistols of the prestigious Best Ranger Competition,” said Jason St. John, Director, Government Products, SIG SAUER, Inc., and Sergeant First Class (Retired), U.S. Army Ranger. “Through this video series we recognize the U.S. Army and the incredible service and sacrifice of the entire U.S. Army Ranger regiment to our country.”

The SIG SAUER Best Ranger Video Series includes the following episodes:

Episode 1: Rangers Lead the Way: the already released video review of the history and foundation of the U.S. Army Rangers.
Episode 2: Honor: the newly released video reviews the inception of the famed Best Ranger Competition.
Episode 3: 2021 Best Ranger Competition: an inside look at the grueling 3-day Best Ranger Competition to be released on the birthday of the U.S. Army, June 14th.
Episode 4: Prestige: an interview with the 2021 Best Ranger Competition winners to be released on Friday, June 18th.

The U.S. Army Best Ranger Competition is a grueling competition that identifies the best, two-man U.S. Army Ranger team on a course that is designed to place extreme demand on each team’s physical, mental, technical and tactical skills and was held in Fort Benning, Georgia, April 16-18, 2021.
Learn more about the SIG Custom Works, U.S. Army Best Ranger Competition M17 Trophy Pistols. About SIG SAUER, Inc. SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 2,300 employees across nine locations. For more information about the company and product line visit: sigsauer.com.

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING

Posted in pistols, Weapon systems | Tagged ARMY RANGERS, SIG SAUER, U.S. Army | Comments Off

Kimber Mourns the Loss of Firearms Industry Leader Chip McCormick

Posted on Thursday, 10 June, 2021 by twobirdsflyingpub

WHAT ALL GUNS SHOULD BE^™

NEW PRODUCTS HANDGUNSRIFLESPEPPERBLASTERMEDIASUPPORTSHOP

TROY, AL, June 8, 2021 — Kimber Mfg. has learned of the passing of Chip McCormick, the man renowned for creating industry-leading 1911 magazines and triggers through his company, Chip McCormick Custom. Mr. McCormick, in partnership with Kimber Mfg. owner and CEO Leslie Edelman, also contributed greatly to Kimber’s success in the 1911 market.

Mr. McCormick provided instrumental consulting to Mr. Edelman in creating the firearm industry’s first mass-produced, high-quality 1911 pistols that included custom features. Mr. McCormick’s contributions included a beavertail grip safety, an extended slide stop, and an ambidextrous manual safety. These efforts not only changed the handgun market by adding upgraded features to commercialized top-notch 1911s, but simultaneously revolutionized how firearm-manufacturing companies crafted and assembled the legendary 1911 platform.

“The Kimber family is deeply saddened by the loss of Chip McCormick. He was a great friend and a great business collaborator,” said Kimber owner and CEO, Leslie Edelman. “His impact on this company, as well as the entire firearms industry, is immeasurable. Our condolences go out to Chip’s family and friends. He will be missed greatly.”

Kimber Mfg., Inc. is an American company that designs and manufactures premium firearms for individual, sporting, law enforcement and military markets. Complete information on Kimber firearms, accessories and Less-Lethal products is available at www.kimberamerica.com or by phone from Kimber in-house staff at +1 (888) 243-4522. A detailed product catalog is available upon request.

Posted in pistols | Tagged 1911, Chip McCormick, Kimber | Comments Off

Shell Shock Technologies Sponsored Shooter John Vlieger Takes Home High Overall at 2021 Ohio State CODA Evolution Buckeye Blast

Posted on Thursday, 10 June, 2021 by twobirdsflyingpub

Shell Shock Technologies Sponsored Shooter John Vlieger Takes Home High Overall at 2021 Ohio State CODA Evolution Buckeye Blast Vlieger also took home first place in the Open Division, finishing with 1449.2105 match points and a time of 178.83.

Westport, Conn. (June 2021) – Shell Shock Technologies, LLC., an early-stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry, is pleased to announce its sponsored shooter, John Vlieger, won High Overall and First Place in the Open Division at the 2021 Ohio State CODA Evolution Buckeye Blast, held June 4 – 6, 2021 in Zanesville, Ohio. Vlieger competed against 254 competitors to finish with 1449.2106 match points and a time of 178.83.
“The 2021 Buckeye Blast was an excellent experience, and I’m happy to walk away with the win. Accurate and dependable gear is a must, and competition shooting pushes that even further. Even with my abuse and demands, my equipment just keeps trucking with Shell Shock Technologies NAS³ cases. The season is just getting started, and I’m going to keep pushing it,” commented Vlieger.
Vlieger has fired over 100,000 rounds of ammunition with Shell Shock Technologies’ NAS³ cases since becoming sponsored in 2017 and plans to continue using it. He can be seen competing next at the 2021 Kentucky Section USPSA Championship, to be held June 20, 2021 in Wilmore, Kentucky.

About Shell Shock Technologies NAS³ Cases:
NAS³ 9mm cases are 50 percent lighter than brass cases, offer greater lubricity and will not abrade, clog, foul, wear-out, or damage breach and ejector mechanisms. The cases offer greater corrosion resistance, tensile strength (2x stronger) and elasticity than brass. NAS³ cases will not split, chip, crack or grow (stretch) and are fully reloadable (using S3 Reload dies) and can be reloaded many more times than brass cases. NAS³ cases have been tested successfully by customers to pressures over 70k psi. NAS³cases can be picked up with a magnet. The head can be colored for branding purposes and easy load identification.
NAS³ is “Best in Class” for maintaining consistent velocity between rounds. In an independent test performed by H.P. White Laboratory (a major munitions testing facility), rounds fired using NAS³ cases achieved a velocity standard deviation of 0.093 FPS (124-grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3fps).
To learn more about Shell Shock’s revolutionary technology, visit www.shellshocktech.com.

About Shell Shock Technologies, LLC: Founded in Westport, Connecticut, in 2015, Shell Shock Technologies, LLC is an early stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry. Shell Shock is a component manufacturer supplying shell cases to the shooting sports market, as well as to U.S. and foreign ammunition manufacturers, law enforcement, military and other government agencies. Shell Shock does not load ammunition. www.shellshocktech.com

Posted in Ammunition | Tagged John Vlieger, Shell Shock Technologies | Comments Off

Let it All Hang Loose with Huk’s New Kona Collection

Posted on Thursday, 10 June, 2021 by twobirdsflyingpub

Kona Collection

Charleston, SC (June 9, 2021) — When hanging loose and looking good is just as important as staying comfortable, reach for one of Huk’s new Hawaiian-themed Kona shirts. These short sleeve button-ups come with island vibes built-in, so it feels like a vacation even when running errands around town. The new Kona performance-packed, short-sleeve button-downs include the Kona Paradise Pass, Kona Kai, Kona Stackin’ Bills, and Kona Fins ‘N Stripes lines. They feature a 65% polyester, 35% cotton blend that is perfect for water and surf adventures, quick-drying while offering a soft feel. All of the Kona shirts are built for all-day comfort, both on and off the water. The new Kona shirts, featuring textured fabrics, are designed to keep anglers cool and dry, no matter how intense the action gets or how much the temperature rises. Hydrophobic fibers transport water and sweat away from the skin to the exterior of the clothing, where it can evaporate more efficiently. Also, perforated underarms and back add much-needed airflow while whisking larger sweat droplets away. All shirts in the Kona Paradise Pass, Kona Kai, Kona Stackin’ Bills, and Kona Fins ‘N Stripes lines feature a 30+ UPF rating for maximum sun protection at all times. A single chest pocket offers storage and a hidden microfiber wipe to keep glasses clean throughout the day. The two-way stretch material allows for a serious range of motion and a classic, comfortable fit. Fun prints are sure to be an instant favorite among anglers and other water-loving thrill-seekers.
Kona Features:

65% polyester, 35% cotton blend
Button-down, short-sleeve shirt with collared neckline
Two-way stretch
Quick-drying
Sun protection
Moisture management
Mesh back chest pocket
Hidden microfiber wipe

Huk Kona Paradise Pass

Colors: Lichen, White, Seafoam, Fusion Coral, and Lavender Blue
MSRP: $55.00 (3XL + $5)

Huk Kona Kai

Colors: Fusion Coral, Tahiti Blue, Key Lime, Glacier, and Beach Peach
MSRP: $55.00 (3XL + $5)

Huk Kona Stackin’ Bills

Colors: Sargasso Sea and Milky Blue
MSRP: $55.00 (3XL + $5)

Huk Kona Fins ‘N Stripes

Colors: Americana
MSRP: $55.00 (3XL + $5)

Marolina Outdoor Inc. was founded to bring deep-seated product expertise across all outdoor categories. Our innovative designs and technologically focused products create the foundation of our authentic outdoor apparel. Huk clothing represents a fresh take and a unique understanding of angling needs, offering functional styles that appeal to anglers of all ages. NOMAD is motivated to provide quality apparel so that hunters can maximize their experiences to hunt and provide sustenance regardless of the size of the game or where their pursuits lead them.

Posted in Apparel | Tagged Huk, KONA COLLECTION, SHIRTS | Comments Off

FOG HORN _ Posts

Recent Posts

Archives

Categories