NSSF to Challenge New York Public Nuisance Lawsuit Law

This law would allow civil lawsuits by municipalities against the firearm industry for the criminal actions by non-associated third parties.

July 6, 2021

NSSF to Challenge New York Public Nuisance Lawsuit Law

NEWTOWN, Conn. – The National Shooting Sports Foundation® (NSSF®) will challenge to overturn the law signed by New York Democratic Gov. Andrew Cuomo that would allow civil lawsuits by municipalities against the firearm industry for the criminal actions by non-associated third parties.

The law is in contravention to federal law, the Protection of Lawful Commerce in Arms Act (PLCAA), and the legal foundations of tort law.

“This law is unconstitutional, plain and simple. It is abhorrent that Governor Cuomo is rehashing a decades-old failed playbook that was rejected by courts in the 1990’s and early 2000’s,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “Governor Cuomo is, again, blameshifting for his administration’s failures to prevent crime by pointing fingers at firearm manufacturers that have been working with federal, state and local authorities for real solutions.® This law is based on the same legal understanding that would allow victims of drunk drivers to sue Ford and Budweiser for the criminal actions of an individual. This law is not legal accountability. It is political posturing.”

Gov. Cuomo signed the law after repeating the same debunked talking points churned out by President Joe Biden. Gov. Cuomo claimed the firearm industry is the only industry immune to lawsuits. That worn-out myth was discredited by The Washington Post and Fact Check.org. Politifact called them “False” in 2015 when failed presidential candidate Hillary Clinton attempted to pass along the debunked information.

Gov. Cuomo knows this history and the record of courts dismissing these lawsuits before PLCAA was passed with a broad bipartisan consensus in 2005. Gov. Cuomo, when serving as President Bill Clinton’s Secretary of Housing and Urban Development, got involved when he organized dozens of local housing authorities to bring their own lawsuits against gunmakers and threatened the industry with “death by a thousand cuts.”

This was his admission these lawsuits lacked legal foundation and amounted to harassment through litigation.

Legal Professor Victor Schwartz, who literally wrote the textbook on tort law, former law professor and law school dean and the current co-chairman of the Public Policy Group of the law firm Shook, Hardy & Bacon, recently authored an op-ed setting the record straight on PLCAA. He wrote, “The PLCAA remains a commonsense law that protects against unsound attempts to change radically a fundamental liability law principle.”

Jonathan Turley, the Shapiro Professor of Public Interest Law at George Washington University, wrote in The Hill of the PLCAA, “The bill saved the industry some litigation costs, but the industry would have prevailed in such actions anyway if they were tried. Product liability and tort actions against manufacturers have uniformly and correctly been rejected by the courts.”

To learn more of the history of PLCAA, what the law does and doesn’t do and other industries with similar protections, read NSSF’s Primer on Repealing PLCAA.

About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

Posted in NSSF/NRA | Tagged , , | Comments Off on NSSF to Challenge New York Public Nuisance Lawsuit Law

Stout FLK | A Sturdy EDC, Back in Stock

FREE STANDARD GROUND SHIPPING

KNIVES MULTI-TOOLS PACKS ILLUMINATION

Introducing Stout FLK

BACK IN STOCK

STOUT FLK

For those who want a small and sturdy EDC, Stout FLK is just the knife you need.

A collaboration between knife designer Mikkel Willumsen and SOG founder Spencer Frazer, Stout FLK easily fits in your pocket and opens with a kick.

Available in stonewash and green, or blackout, Stout FLK is a uniquely designed blade made for everyday challenges.

Limited availability, so get them now before inventory runs out!

SHOP NOW

Stout FLK Diagram

Stout FLK Specs

G10 and Stainless Steel HandleKick provides quick opening

CRYO D2 Steel
Stout Story

WHEN KNIFE DESIGNERS COLLIDE

How did the Stout FLK come together anyways? That’s what we explore in our latest story, where we interview knife designer Mikkel Willumsen and SOG founder Spencer Frazer. In this post they discuss the process of designing the Stout FLK, the challenges, and what they think about each other’s work.

READ THE WHOLE STORY

PROFESSIONAL

OUTDOOR

DAILY

Lifetime Warranty

Free Shipping

Mission Ready. Purpose Built

Engraving

Free shipping limited to the continental US.

Limited to stock on hand.

Online exclusive.

Mission-centric solutions designed to enhance capability, no matter the situation. Drawn from studying user insights, our systems confidently embrace adversity, turn obstacles into opportunities and push us in our relentless pursuit of greater potential.

SOG Knives and Tools
6521 212Th St Sw Lynnwood, WA 98036

Posted in Knives and Tools | Tagged , , | Comments Off on Stout FLK | A Sturdy EDC, Back in Stock

Galco’s Speed Master 2.0 Paddle/Belt Holster!

Header Logo

Galco’s Speed Master 2.0 Paddle/Belt Holster!

PHOENIX, July 2021
Whether you’re a fan of a certain fictional Wyoming sheriff or a gun carrier in search of a versatile and practical EDC holster, Galco’s
Speed Master 2.0™ is a great choice.
Featuring an open top design for speed, covered trigger for safety, and tension screw adjustment for security, the Speed Master 2.0 adds convenient on/off ability to the equation when set up as a paddle holster. As a bonus, the Speed Master 2.0 can also be configured as a solid and stable belt holster using the included belt slot attachment.
The Speed Master 2.0’s versatility derives from its included twin attachment methods – an adjustable belt slot and a paddle – that are quickly and easily interchangeable by the end user. A flat-headed screwdriver is the only tool needed to swap one attachment for the other, giving the gun carrier the choice of two carry methods: the convenient paddle design or the stable and traditional belt slot.
Available in black or tan for over 80 different guns, the Speed Master 2.0 is constructed of premium steerhide, and fits belts up to 1 3/4″.
See all Galco’s paddle holsters at
galcoholsters.com!



Dealer inquiries:
800-874-2526 
dealersales@galcoholsters.com

Galco International, LTD is the designer and manufacturer of Galco Holsters, the premier American-made brand of superb-quality holsters, belts and accessories. Encompassing law enforcement, military, defensive and sporting use, the Galco brand utilizes leather, nylon and Kydex to meet the demands of today’s consumers. Women’s holster handbags, tactical slings and hunting accessories round out the line. All Galco products are proudly handcrafted in the USA since 1969

Footer Logo


Footer Logo

Galco International | 2019 West Quail Avenue, Phoenix, AZ 85027

Posted in Holsters | Tagged , , , | Comments Off on Galco’s Speed Master 2.0 Paddle/Belt Holster!

ODU launches new connector series ODU AMC® Series T – three locking options in one connector for additional security


Mühldorf, July 5, 2021

Maria

Nicol Schindlbeck

Lisa Schwertlinger

Katharina Schimpfhauser
Graphic Designer
ODU GmbH & Co. KG
Tel.:
+49 8631 6156-1817

ODU launches new connector series

ODU AMC® Series T – three locking options in one connector for additional security

The “T” stands for 3-in-1 or the “Triple”. Three locking options fit on one connector or receptacle part: Push-Pull, Break-Away or Screw Lock. Additional security is provided by the built-in trapezoidal threaded locking.

The new ODU AMC® Series T connector is even more rugged, sealed, proven reliable and offers unlimited possibilities. Following the motto everything is possible, the customer chooses locking type, cable connection, size, insert and number of contacts.

Its strengths:

· high vibration resistance

· waterproof according to MIL standard 810

· Sealed mechanical area, thus completely protected against Water, dirt and dust

· Easy to handle and install

· Suitable for MIL backshell and MIL crimp contacts

The ODU AMC® Series T connectors are available in two sizes and are compatible with standard backshells.

The ODU AMC® Series T is suitable for use in military, security and communications applications. The connectors are field terminable. Thus they are time saving. Even the individual contacts can be replaced or repaired in the field. It couldn’t be simpler for the operators. In addition this connector offers protection against water, dirt and dust.

The new connector system is also suitable for civilian applications. Where “raw and rough forces” prevail, the ODU AMC® Series T is used. Heavy construction machinery and agricultural vehicles are also exposed to high impacts. Vehicle and machine operators work in the field, in the forest, off-road, and encounter situations where they have to reconnect or repair or adjust the connector. This is exactly the situation that requires reliable, durable material that is easy to handle. Vibration resistant, waterproof, with easy handling, both in repair and assembly.

The characteristics at a glance:

  • · high performance under vibration
  • · waterproof according to MIL standard 810
  • · high flexibility: 1 receptacle, 3 locking options
  • · based on the MIL 38999 standard
  • · crimp contacts according to MIL standard
  • · reverse gender
  • · high temperature range: -65°C up to +175°C
  • highly robust
  • · sealed locking area
  • · isolated mechanical area and one piece housing
  • · backshell opportunity
  • · smaller than competitive 38999 products
  • · optimized assembly process – quick & easy
  • · full mate indicator
  • · mechanical and coloured coding

https://www.odu-connectors.com/news/news/view/new-odu-amcr-t-series-3-locking-variants-in-one-connector/

ODU Group: global representation with perfect connections

The ODU Group is one of the world’s leading suppliers of connector systems, employing 2,300 people around the world. In addition to its company headquarters in Mühldorf am Inn (Germany), ODU also has an inter­national distribution network and production sites in Sibiu/Romania, Shanghai/China and Tijuana/Mexico. ODU combines all relevant areas of expertise and key technologies including design and development, machine tooling and special machine construction, injection, stamping, turning, surface technology, assembly and cable assembly. The ODU Group sells its products globally through its sales offices in China, Denmark, England, France, Germany, Hong Kong, Italy, Japan, Korea, Romania, Sweden and the US, as well as through numerous international sales partners. ODU connectors ensure a reliable transmission of power, signals, data and media for a variety of demanding applications inclu­ding medical technology, military, communications and security, automotive, industrial electronics, and testing & measurement.

Posted in Electronics | Tagged , | Comments Off on ODU launches new connector series ODU AMC® Series T – three locking options in one connector for additional security

Special Operations technology in the Maritime environment

20210704_152538

THE ADVANCED MARITIME TECHNOLOGIES

CALLED UPON BY GLOBAL SPECIAL OPERATIONS FORCES

Rigid Hull Inflatable Boats (RHIBs) are the platform of choice for Special Operations Forces (SOF) seeking to undertake an extensive list of mission sets in riverine, littoral and blue water environments. RHIBs are used to support the rapid insertion and extraction of small unit teams during maritime counter-terrorism, anti/counter-piracy and counter-narcotics operations around the World. To accomplish these tasks successfully, RHIBs require increasingly capable and integrated mission suites including various elements of command, control, communications, intelligence, surveillance, target acquisition and reconnaissance and key sensor payloads.

L3Harris’ WESCAM MX™-10MS Electro-Optical and infrared (EO/IR) sensor can quickly be integrated and operated on board RHIBs in any operational environment and is optimized to support the rising operational requirements of maritime SOF units. The WESCAM MX-10MS is ideal for use during undercover special operations, including special reconnaissance and offensive action. Examples include; covert surveillance ahead of beach landings or the identification of enemy positions ahead of a larger, conventional amphibious attack; as well as Combat Search and Rescue missions where sensor payloads on board RHIBs can be used to scan long distances for debris and survivors.

L3Harris’ maritime sensors have been the ‘eyes’ of maritime vessels for over 45 years and remain ideally positioned to support Special Operations Forces across the future operating environment.

Posted in Electronics, ISR, Thermal Imaging | Tagged , , , | Comments Off on Special Operations technology in the Maritime environment

Save on Top Selling SIG AIR Pistols, Red Dots + Targets

Celebrate Independence Day Weekend and save when you combine our top selling air pistols, the PROFORCE M18 Airsoft Pistol (6MM BB) and the P320-M17 Air Pistol (.177CAL) with the SIG AIR Reflex Sight. These combinations make it easy and affordable to practice tactical training as well as your draw, target acquisition and shooting accuracy in the comfort of you own backyard. Both pistols include full blowback metal slides, drop magazines, and can be field stripped just like their official U.S. Army M17 and M18 counterparts.

While supplies last.

PROFORCE M18 Airsoft Pistol Bundle

MSRP: $259.98

NOW: $204.98

YOU SAVE: $55

BUY NOW: PROFORCE M18 Airsoft Pistol Bundle

P320-M17 Air Pistol Bundle

MSRP: $209.98

NOW: $174.90

YOU SAVE: $35

BUY NOW: P320-M17 Air Pistol Bundle

ALSO ON SALE

SIG Airgun Reflex Target

The D. Verified Reviewer

★★★★★

“PERFECT FOR TEACHING”

WAS: $15.99

ON SALE: 12.99

BUY NOW

SIG Airgun Spinner Target

Marsen E. Verified Buyer

★★★★★

“I LOVE TO SEE THAT THING SPIN”

WAS: $15.99

ON SALE: 12.99

BUY NOW

The SIG MCX Canebrake .177 CAL air rifle keeps you on target longer with fewer reloads utilizing its 30-round SIG Rapid Pellet magazine. Based on the innovative designs of the SIG MCX Rattler Canebrake, this CO2 model is ideal for training and practice.

Robert C. Verified Reviewer

★★★★★

“AMAZING! ACCURACY IS FANTASTIC”

BUY NOW: MCX Canebrake Air Rifle

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Airsoft | Tagged , , , | Comments Off on Save on Top Selling SIG AIR Pistols, Red Dots + Targets

Two Weeks Remain to Submit an Abstract | 2021 Undersea Warfare Fall Conference

2021 Undersea Warfare Fall Conference

Present Your Abstract | July 16 Deadline

The National Defense Industrial Association’s (NDIA) Undersea Warfare Division invites authors of high-quality professional abstracts to submit their work for technical presentation at the 2021 Undersea Warfare Fall Conference, scheduled in-person for September 27 – 29, 2021, in Groton, CT. Each abstract must be UNCLASSIFIED and cleared for public release with unlimited distribution (Distribution A). Each abstract should fit into one of the following Technical Sessions:

Aviation Systems
Combat Systems & C4I
Mine Warfare
Undersea Sensors
Undersea Vehicles
Warfighter Performance

Individuals are required to submit a concise abstract of 5,000 characters or less by Friday, July 16. Authors will be notified whether their abstract has been accepted by July 30. For complete details on the abstract submission process, visit the event website or contact George Webster at gwebster@NDIA.org.

Info Submit

Sponsorship and Advertising Opportunities

Looking to gain visibility and increase your brand exposure in front of the Undersea Warfare community? Sponsorship opportunities coming soon. Contact Andrew Peters at apeters@NDIA.org to be notified once information is available.

For information on advertising opportunities, visit the event website.

Coronavirus (COVID-19) Information

The Undersea Warfare planning team continues to monitor the novel coronavirus (COVID-19) situation. Currently, the 2021 Undersea Warfare Fall Conference is scheduled to occur as published. The health and safety of our event participants, members, and partners remain our top priority. We are committed to following the guidelines and precautions as outlined by the CDC.

NDIA is fully prepared to adjust any and all plans if the situation changes. We are following—and will remain in compliance with—all city, state, and federal guidelines. If the direction from federal, state, or local official public health authorities changes, we will adhere to the new guidance, act upon it immediately, and update everyone. We are fully prepared to adjust our plans as needed.

The NDIA team recognizes the importance of convening the national security and defense communities to promote the best policies, practices, products, and technology for warfighters and others who ensure the safety and security of our nation. We thank you for your continued support and hope to see you soon.

For more information and updates from NDIA about COVID-19, please refer to the NDIA Coronavirus (COVID-19) Update Page.

More information about the event will follow, so please continue to visit the event website for updates.

Questions? Contact Meredith Mangas at mmangas@NDIA.org.

Dates

Dates

September 27 – 29, 2021

Location

Location
U.S. Naval Submarine Base New London
1 Crystal Lake Rd
Groton, CT 06340

Contact

Contact
Meredith Mangas
Associate Director, Meetings
(703) 247-9467
mmangas@NDIA.org

National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201

Posted in NDIA | Tagged , | Comments Off on Two Weeks Remain to Submit an Abstract | 2021 Undersea Warfare Fall Conference

Independence Day Specials, 2022 Courses and More

INDEPENDENCE DAY SAVINGS AT THE PRO SHOP

Come visit the SIG SAUER Pro Shop from July 2-3 and July 6-9 for Independence Day specials. This is valid for in-store purchases only.

Please note: the store is closed July 4-5.

Pro Shop Hours: Monday-Saturday 8am-7pm, Sunday 8am-6pm.

Contact proshopinfo@sigsauer.com for details.

2022 Course Schedule

Our Q1 and Q2 course schedule for next year has been added to the website! Click the link below for a full list of courses offerings and to sign up.

SEARCH COURSES

Posted in Training | Tagged , | Comments Off on Independence Day Specials, 2022 Courses and More

BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE

BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE
Easier to teach. Easier to learn. Easier to hunt.
Here’s a simpler way for hunting mentors and mentees to connect.

BARNEVELD, Wis. – Imagine you never started hunting … All those early mornings. All those moments you thought your heart would pound right out of your chest. Many people never get the chance to experience the woods waking up around them, or to cook their family meat they brought home from the field.
But you can help them discover hunting, and our friends at
Identical Draw are here to help: Introducing newhunter.org, a simpler way for hunting mentors and mentees to connect.

BECOME A MENTOR

Hang out your “Welcome Sign”
According to the team at Identical Draw, one of the most important ways hunters can become mentors is simply letting friends and family know they are open to mentoring, using resources like their Instagram bios and social media.
But for many people interested in hunting, the process of connecting with a mentor is far more challenging, and that’s what newhunter.org is trying to address. But before jumping in, it pays to get a little practice. “Just like hunting, mentors need experience to become more skilled and knowledgeable,” the Identical Draw team said, “Knowing what to say, how to react, and being there for a new hunter are all things that need to be learned.”
Share your hunting passion
Once you feel like you’re ready to mentor,
newhunter.org is the place to start. Offering new hunters the perfect way to ask questions, learn, and get into the field, the site is built to help make the connections that get new hunters going. The Identical Draw team said, “Here, new hunters and seasoned hunters can connect and join each other on a hunt. This is a free platform with the full intent of getting more new hunters outdoors, and reconnecting families with their hunting heritage.”
If you’re interested in becoming a hunting mentor, check out
this blog from Identical Draw to get started, then go to newhunter.org to connect with someone who needs your help to start hunting.
To see more from Vortex, visit
VortexOptics.com

About Vortex Optics: American owned, veteran-owned, Wisconsin-based Vortex Optics designs, engineers, produces, and distributes a complete line of premium sport optics, accessories, and apparel. Dedicated to providing unrivaled customer service and exceptional quality, Vortex® backs its products with the unconditional, transferrable, lifetime VIP Warranty. Built on over 30 years of experience in the optics industry, Vortex® has emerged as a leader in the optics market.

Vortex Optics

1 Vortex Dr

Barneveld, WI 53507-9412

Posted in Benefits, Optics | Tagged , | Comments Off on BECOME A HUNTING MENTOR THIS YEAR AND CHANGE SOMEONE’S LIFE

BAWIDAMANN SHENANIGANS 7.1.21 INDEPENDENCE DAY

2021 ALOHA PUA WOOBIE PRE-ORDER IS OPEN
+ FREE SHIPPING UNTIL 7.5.21

Just like the Original M1942 Frogskin Garments this Woobie is 2 sided.
There is a Jungle side and a Beach side. This is 2 blankets in one!
Put in you pre-order and save a few Bucks for a Labor Day Shipping window.
Its that time of year where we sit on top of the Woobies outside instead of laying under them while inside.  Enjoy the summer. Read a book, have a picnic.
Pick one of these multipurpose blankets up today.
More info/purchase:
CLICK HERE:

ALOHA PUA SHIRT FREE SHIPPING + WW2 ERA PIN
For Independence Day I am offering FREE SHIPPING and a Josh’s Flight Jacket WW2 Pin
as long as supplies last.
SHIRTS ARE IN! SIZE RESTOCK!
Shirts are IN! Sizes have been restocked!
HONU JUNGLE, HONU BEACH, AND HONU ATOLL
This is our third Aloha Shirt Design  “ALOHA PUA” print.
As always a limited number of pieces will be produced. Styling is inspired by the vintage Aloha shirts from the 70s with an updated fit. For 2021, Bawidamann reinterprets the M1942 Frog Skin Camo pattern using Plumeria and the majestic Honu turtle as his muse. Embedded within the print are symbols from the WW2 Pacific Theater: Samurai swords, B.A.R.s, Nambu pistols, Zippos, and grenades. Genuine coconut shell buttons.
More info/purchase:
CLICK HERE:

I ordered enough WW2 era reproduction Pins to include in everyone’s Aloha shirt Order while supplies last. There are several designs. ONE pin will be randomly thrown in with the order. These are not cheap. These are not easy to get. And they are really fun. Hand Made by Josh’s Flight Jackets out of Germany.
HOW ABOUT THAT!

ALOHA PUA PATTERN TXC HOLSTERS

GET READY THESE WILL LAUNCHING JULY 6TH
These Limited edition Holsters always add fun to your summer EDC loadout.
As always they will only be offered for a limited time.
 

TITANIUM ST MICHAEL PROTECTION PENDANTS
Bronze 2 tone pendants shown here.
PRAYER OF ST. MICHAEL THE ARCHANGEL
St. Michael the Archangel, defend us in battle. Be our protection against the wickedness and snares of the devil. May God rebuke him, we humbly pray; and do thou, O Prince of the Heavenly Hosts, cast into hell, Satan and all the evil spirits, who prowl about the world seeking the ruin of souls.
-Amen.
More info/purchase:
CLICK HERE:

Posted in Apparel | Tagged , , | Comments Off on BAWIDAMANN SHENANIGANS 7.1.21 INDEPENDENCE DAY

Wishing You A Safe And Happy Celebration!

Posted in Uncategorized | Tagged , | Comments Off on Wishing You A Safe And Happy Celebration!

Blackhawk Introduces Streamlight TLR-7A Flex and TLR1-HL Tactical Weapon Lights

BH_TLR_Light_Mounted(lowres) (002)

Blackhawk_Logo_Black_LG

Blackhawk® Introduces Streamlight®TLR-7A Flex® and TLR1-HL® Tactical Weapon Lights

VIRGINIA BEACH, Va. – June 30, 2021 – Blackhawk®, a leader in law enforcement and military equipment for over 20 years, has partnered with Streamlight® to deliver two tactical weapon lights, the TLR1-HL® and TLR-7A Flex®. Already popular among shooters, both Streamlight models are designed to fit several Blackhawk holsters, most notably the Blackhawk T-Series. In addition, the TLR1-HL is compatible with the Blackhawk Omnivore holster.

With 1,000 lumens and a 928-foot beam at the ready, the TLR1-HL is designed to provide maximum visibility when illuminating a room, alley or other wide space. Meanwhile, the TLR-7A features 500 lumens and a 459-foot beam, but also comes with an ergonomic, ambidextrous on/off switch that can be customized for either a low or high position to match a user’s grip style.

Both lights feature a rail clamp system that securely attaches the light without tools and without a user needing to put their hands in front of the muzzle. The TLR1-HL mounts directly on Glock-style and Picatinny rails, and includes keys for Glock-style, Picatinny, Beretta 90-Two, S&W 99, S&W TSW and SIG P320 setups.

Each Streamlight is designed to withstand the tests of time and field use with anodized machined aluminum and IPX7 waterproof ratings. The TLR1-HL can run up to 1.5 hours on two CR123A lithium batteries and the TLR-7A can run up to 1.5 hours on one CR123A lithium battery. A safe off feature also prevents accidental activation and saves battery life.

The lights feature a black finish and engraved Blackhawk logo, are assembled in the U.S., and feature Streamlight’s limited lifetime warranty. MSRP for the TLR1-HL is $209.95 and MSRP for the TLR-7A is $174.95.

For more information about these tactical lights or compatible holsters, visit blackhawk.com. For more support or customer service, visit streamlight.com.


About Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this obsession with quality applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide gear that won’t let you down. Because we’re not just making stuff – we’re honoring a vow.


Posted in Tactical Lighting | Tagged , , , | Comments Off on Blackhawk Introduces Streamlight TLR-7A Flex and TLR1-HL Tactical Weapon Lights

Introducing the MPA BA PMR Pro Rifle II, Now with Trigger Tech Diamond Trigger, for the 2021 Precision Rifle Series (PRS) Season, from MasterPiece Arms (MPA)

The MPA BA PMR Pro Rifle II (Precision Match Rifle) is designed specifically for the Production Class requirements of the PRS with the price threshold for the 2021 season of $2,500.

Comer, Ga. (July 2021) MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles and Chassis Systems, has specifically designed its new MPA BA PMR Pro Rifle II (Product Match Rifle) to meet the Production Class requirements of the 2021 Precision Rifle Series (PRS) competition season. This rifle has been approved for use within this division of the PRS and includes many competition-related features while staying under the price threshold of $2,500 for this class. It is available in either a Black or Tungsten Cerakote® finish and has a ½ MOA accuracy guarantee.  The PMR Pro Rifle II now includes the Trigger Tech Diamond Trigger that features a 4 oz. – 2 lbs. pull weight range.

The MPA BA PMR Pro Rifle II utilizes the MPA BA Competition Chassis, which is machined on MPA’s CNC Horizontal Machining Centers to exacting tolerances from 6061 aluminum. The v-bedding system provides additional clearance for glass bedding action and straight section of the barrel. The chassis also includes a built-in inclinometer, thread protector (no muzzle brake), thumb notch, lower mounted Picatinny Rail, 20 MOA Scope Rail, EVG Grip, Ultra Bag Rider, V4 Spigot Mount, and is R.A.T. System compatible. The MPA Buttstock comes with an adjustable cheek riser and length of pull that is locked in position with a series of set screws that are embedded into the buttstock body. If the customer would like to add a muzzle brake to this rifle, it can be added as an accessory and it will not affect the Production Class status. Muzzle brake options for the MPA BA PMR Pro Rifle II include the MPA Premium Bolt Action Muzzle Brake 6.5mm and the MPA Premium Bolt Action Muzzle Brake 30 Cal.

The MPA BA PMR Pro Rifle II includes a Lothar Walther hand-lapped 416R Stainless Premium Barrel Blank with a polished barrel finish. The chamber is indicated within 0.0001” or less to the bore of the rifle and is bore and land inspected on a video borescope.

MPA BA PMR Pro Rifle II Specifications:

  • Caliber: 6mm Creedmoor, 6GT, 6.5 Creedmoor, 6.5 PRC, 6 Dasher, 6BR, 6BRA, 6XC, 6 x 47 Lapua, .308 Win, .223
  • Action: MPA/Curtis Short Action
  • Bolt: 60 Degree Bolt Throw
  • Chassis: MPA BA Competition Chassis
  • Chassis Weight: 5 lbs.
  • Rifle Weight: 12.5 lbs.
  • Barrel: Lothar Walther Hand Lapped 416R Stainless Premium Barrel Blank
  • Barrel Twist: Caliber specific
  • Barrel Length: 26” (6.5mm and 6mm)
  • Barrel Muzzle Thread: 5/8-24 TPI
  • Barrel Profile: #M24 Contour
  • Coating: Cerakote Chassis, Polished Barrel
  • Length of Pull: 13.75 – 15”
  • Trigger: Trigger Tech Diamond or Timney HIT Trigger
  • Trigger Pull: Trigger Tech Diamond: 4 oz. – 2 lbs. (Customer Choice)
  • Timney HIT Trigger: 6 oz. – 2 lbs. (Customer Choice)
  • Magazine: 10 Round AICS Type Magazine Included
  • MSRP: $2,499.00

MPA makes every effort to get the product to the customer as quickly as possible. These are hand-built precision instruments and not production components. To see MPA’s latest delivery and lead times for all Bolt Action Rifles and Chassis, visit https://masterpiecearms.com/bolt-action-rifle-and-chassis-current-delivery-times/.

For more information on MasterPiece Arms and their product line of rifles, chassis systems, and accessories, visit www.masterpiecearms.com.

About MasterPiece Arms:

MasterPiece Arms‘ main offices, located in Comer, Georgia, combine quality engineering and state-of-the-art manufacturing to design and produce firearms, such as highly successful BA Rifles and Chassis Systems. Masterpiece Arms uses high accuracy CNC machining, turning, barrel making, laser cutting, and bending in its manufacturing process controlled by their ISO9002/TS16949 Registered Quality System.

MPA engineers test and retest our weapons to provide customers with one of the most enjoyable guns available. With versatile uses, such as personal and home protection, long-range shooting, hunting, and tactical interests, MPA products are one of a kind and backed by a lifetime warranty for original owners. Learn more about MasterPiece Arms products at www.masterpiecearms.com or call 866.803.0000.


Posted in Weapon systems | Tagged , , , , , | Comments Off on Introducing the MPA BA PMR Pro Rifle II, Now with Trigger Tech Diamond Trigger, for the 2021 Precision Rifle Series (PRS) Season, from MasterPiece Arms (MPA)

Swagger Bipods: Strength & Flexibility Where it Counts

Grand Island, NE (July 1, 2021) – When Americans gather on Independence Day to celebrate liberty, one activity, in particular, will demonstrate their freedom like no other: Shooting. More practical than fireworks though less filling than BBQ and burgers, safe fun with firearms is one of the best ways any American can celebrate our unique nation’s unprecedented level of gun ownership. And there’s no better way to accurately and easily control your shooting than with Swagger bipods.

Now that ammunition is not quite as scarce as it has been, shooters don’t have to feel wasteful when they hit the range for a target shooting session with two uniquely American designs–an MSR or AR-style rifle and a Swagger Tactical Bipod. Both the SEA-12 and SFR-10 QD bipods work well for tactical use and hunting and can be easily mounted on a Picatinny rail.

The Swagger SEA12 (Extreme Angle) Bipod has overmolded flex joints which help stabilize its swagger, making it easy to stay on target. Its most effective range of adjustment is 9 to 12 inches and can even go lower by pivoting the legs forward up to 45 degrees. An extremely wide range of can and traverse makes the Swagger SEA12 perfect when you need to swing your rifle far and wide to engage targets. Click here to learn more about the new SEA12.

The Swagger SFR10 QD (Flex to Rigid, Quick Detach) Bipod provides shooters with the ability to adjust the level of “Swagger flex” – or eliminate it when you need a traditional rigid-leg bipod platform. With the most effective adjustment range of 6 to 10.5 inches, this bipod lets you go lower with the same style of adjustment found on the SEA12, allowing you to pivot the legs forward up to 45 degrees. Click here to learn more about the new SFR10 QD.

Celebrating liberty with firearms is as American as apple pie, if not more so. Swagger bipods wishes all Americans a happy Independence Day and asks them to remember the Swagger Limited Lifetime Guarantee when they go shopping for a new bipod.

SWAGGER SEA12 (EXTREME ANGLE) BIPOD FEATURES

· Mounts to Picatinny rail

· Overmolded Flex Ready joint for a more stable shooting platform

· Designed for hunting or shooting situations where extreme angles apply

· Offers extreme can and traverse

· Legs can be set at a 45º angle for a lower shooting position

· Offers plenty of clearance for magazine changes

SWAGGER SEA12 (EXTREME ANGLE) BIPOD SPECIFICATIONS

· Weight: 13.6 ounces

· Most effective range: 9 to 12 inches

· Item number: SWAG-BP-SEA12

· UPC: 857925007245

MSRP: $199.99

SWAGGER SFR10 QD (FLEX TO RIGID, QUICK DETACH) BIPOD FEATURES

· Quick Detach

· Mounts to Picatinny rail

· Designed for long-range hunting, competition shooting, and combat situations

· Adjustable flex tension allows the shooter to fine-tune flexibility to the situational need

· Easily adjustable from flexible to rigid

· Legs can be set at a 45º angle for a lower shooting position

· Offers the ability to quickly acquire & visually maintain a target in any terrain

· Provides plenty of clearance for magazine changes

SWAGGER SFR10 (FLEX TO RIGID, QUICK DETACH) SPECIFICATIONS

· Weight: 15.2 ounces

· Most effective range: 6 to 10.5 inches

· Item number: SWAG-BP-SFR10

· UPC: 857925007252

· MSRP: $249.99



Swagger Bipods are made in the USA, incorporating numerous unique high-performance features, including our patented Flex Ready Technology built into many of our products. At Swagger, we are confident our bipods will do for you what no bipod has ever done before, and back this claim with our Limited Lifetime Guarantee.

Swagger bipods are also covered by our Shoot With Confidence Guarantee. If your Swagger bipod does not give you more shooting flexibility and more shooting confidence, send the product back to us within 30 days of purchase, with proof of purchase from an authorized dealer, and we will buy it back. No questions asked.

For more information, please visit WWW.SWAGGERBIPODS.COM

Posted in Accessories | Tagged , , , | Comments Off on Swagger Bipods: Strength & Flexibility Where it Counts

SLx MD-25 ACSS accepts Industry Choice Award

Primary Arms Optics

PRIMARY ARMS SLx® MD-25 ACSS® NAMED ‘RED DOT OPTIC OF THE YEAR’ IN 2021 INDUSTRY CHOICE AWARDS

HOUSTON, TEXAS – At the 2021 Industry Choice Awards, Primary Arms Optics won this year’s ‘Red Dot Optic of the Year’ Award with their new SLx® MD-25 ACSS® Red Dot Sight.
The annual Industry Choice Awards bring together dozens of independent evaluators from all corners of the firearms industry, including competition shooters, Law Enforcement, Military, Gunsmiths, range owners, manufacturers, and other firearms product enthusiasts. Together, they provide unbiased evaluation for a wide variety of categories, and in this year’s optics evaluation, Primary Arms Optics took the award for ‘Red Dot Optic of the Year’ with their SLx MD-25 ACSS.
The MD-25 is part of Primary Arms Optics’ SLx line, which built their reputation for innovation, reliability and value. All SLx optics undergo rigorous field-testing during development to best serve the user in any environment. Functionally, the SLx MD-25 Microdot sight blends the low-profile design of a microdot with and larger 25mm objective window. With a wider aperture, users can see more of their target’s surroundings, eliminating the housing obstruction of similar red dots. Combined with an ultra-bright emitter, the MD-25 makes it easy to get on target, even in bright sunlight.
This year, Primary Arms Optics released a new version of the MD-25 that features the ACSS CQB reticle. The ACSS CQB reticle features a large outer horseshoe, an infinitely-precise center chevron, and 3 holdover dots that act as ballistic holdovers for popular calibers like 5.56×45, 5.45×39, 6.8 SPC, .308 Winchester, and many more. In close quarters, the outer horseshoe provides quick target acquisition for rapid engagement, while the infinitely precise chevron gives a clear point of aim at zero. The ACSS CQB reticle is a perfect pair with the naturally agile SLx MD-25, earning it the top spot in this year’s Industry Choice Awards.

“We are proud that our MD-25 Red Dot with ACSS CQB reticle received this prestigious award,” says Marshall Lerner, CEO of Primary Arms. “The recognition it has received validates the time invested in engineering design, testing, and focus given to every detail. From the robust mounting system to the advanced ACSS reticle, our goal was performance and value, a combination that has become synonymous with all our SLx optics.”

Primary Arms Optics
Founded in 2008, Primary Arms Optics® is a leading innovator in tactical optics, offering a comprehensive selection of rifle scopes, prism scopes, red dot sights, optic mounts, and accessories. Their Advanced Combined Sighting System (ACSS®) is a high-performance reticle solution to the challenges of modern marksmanship, distilling complex mathematics into intuitive holdovers that enhance your speed and precision. Each ACSS reticle is specially designed to outperform in real-world applications, incorporating a mix of tools to deliver instant firing solutions. These tools may include ballistic drop compensation, auto-ranging stadia, wind holds, moving target leads, or an infinitely-precise center chevron. Primary Arms Optics produces several tiers of products to meet the needs of any budget. The premier PLx® optics line prioritizes clarity and craftsmanship with first-class materials. The mid-tier GLx optics incorporate premium technologies with approachable pricing, while the popular SLx® optics offer both proven reliability and value. Every Primary Arms Optics product is hand-inspected at their Houston-based headquarters, and all their products come with a Primary Arms lifetime warranty.

For more information on Primary Arms, visit the company website at www.primaryarms.com


Primary Arms Optics
3219 South Sam Houston Pkwy East, Ste 100 Houston, TX 77047
713-570-1910  sales@primaryarmsoptics.com

Posted in sights | Tagged , , | Comments Off on SLx MD-25 ACSS accepts Industry Choice Award

Bushnell® Releases New Prime 1800 Laser Rangefinder

Image

_PRIME1800_SELECT Lowres

Bushnell® Releases New Prime 1800 Laser Rangefinder

New LRF Serves as Milestone in Bushnell’s History of Laser Rangefinder Development

OVERLAND PARK, Kan. – June 30, 2021 – Bushnell®, an industry leader in performance optics, has announced the introduction of the newest addition to its laser rangefinder lineup – the Prime 1800. Packed with added features such as Bushnell’s all-new ACTIVSYNC™ display system that fluidly morphs from black to red readouts based on lighting conditions, the Prime 1800 builds on the success of Bushnell’s 25-year legacy of laser rangefinder development.

With its all-glass, fully multi-coated optical path and extra-large laser aperture window, the Prime 1800 boasts double the light transmission over other competitive models. The Prime 1800 has also been designed for all day viewing capability made possible by the new ACTIVSYNC display. This intuitive display feature fluidly morphs automatically from black in the daylight to red in low-light conditions so users can always see their readings, whether at sunrise, midday, or dusk. The display can even show red and black simultaneously if the environment requires it.

“In order to fully leverage the excellent 2x brightness from our laser rangefinders, we knew adding an illuminated display would give users the ability to use it throughout the entire legal hunt time,” said Derek Osburn, Director of Optics for Vista Outdoor. “However, we also knew that we wanted to go further and apply our 25-year history of laser rangefinder innovation to this feature and have done so with the new ActivSync display. This intuitive design gives you a red or black display exactly when you need it, making it even easier to get an exact distance quickly and accurately.”

The new Prime 1800 offers effective ranging capabilities out to 1,800-yard on a reflective target and can reliably range trees out to 1,000 yards or deer out to 700 yards with +/- one-yard accuracy. The Prime 1800 comes equipped with Scan mode for fast ranging, as well as near/far target modes to allow users to home in on targets while ignoring objects in the foreground and background. The rangefinder also comes equipped with ARC (Angle Range Compensation) technology for angle readings in the field.

The Prime 1800 rangefinder includes a built-in tripod mount and lanyard holes, giving users multiple setup options to keep the rangefinder secure and stable. A threaded metal battery door can be found on the bottom of the rangefinder and a CR2 battery is included so the Prime 1800 is ready right out of the box.

Backed by Bushnell’s 5-year Lifetime Ironclad warranty, the Prime 1800 rangefinder is engineered and manufactured to withstand the ultimate test of years of use in the field. The Prime 1800 carries an MSRP of $249.99 and is available now.

To learn more about the Prime 1800, Bushnell’s 25th Anniversary of Accuracy or to see Bushnell’s full lineup of rangefinders and other optics, visit Bushnell.com.

About Bushnell

Bushnell, a Vista Outdoor brand, has been the industry leader in high-performance sports optics for more than 70 years. Our guiding principle is to provide the highest quality, most reliable and affordable sports optics products on the market. And, our commitment to outstanding customer service and strong retailer partnerships is unmatched. Bushnell boasts leading market share in all of the sports optics categories, and our products have consistently won design and performance awards. Our product lines enhance the enjoyment of every outdoor pursuit from spectator sports, nature study, hunting, fishing and birding to stargazing. For news and information, visit www.bushnell.com

Posted in Range Finder | Tagged , | Comments Off on Bushnell® Releases New Prime 1800 Laser Rangefinder

Pro Tip: Ballistic App and Suppressed Rifles

Gainesville, GA (July 1, 2021) Suppressors are great tools for serious shooters, especially long-distance competitors and hunters. Quality suppressors reduce muzzle blasts to safe hearing levels without hearing protection, making communication between shooters more efficient. In most cases, a suppressor will even lessen the felt recoil of a rifle. However, shooters need to make specific allowances for suppressed firearms.

“A suppressor can change your rifle’s point of impact,” said Curt Vaughn, veteran long-distance shooting competitor and Head of Product for Ballistic. “If you shoot with your suppressor on all the time, you should be fine. However, if you have it on and off, you will, in most cases, see a shift in impact from zero when going from an unsuppressed to a suppressed rifle.”

When possible, Vaughn advised, always keep the suppressor attached to your rifle. However, if you do have to remove it for certain shots, make sure you know the point of impact shift which will result, and hold over and/or to the side accordingly.

One question that frequently comes up: how might a suppressor affect your bullet’s velocity? Interestingly, a recent study looked at this question and found that a suppressor can alter your load’s feet per second (fps) velocity. And here, Ballistic can aid the long-distance shooter.

The study, “Effects of Sound Suppressors on Muzzle Velocity, Bullet Yaw, and Drag,”

https://arxiv.org/ftp/arxiv/papers/1802/1802.05748.pdf was written by four researchers based on tests they conducted at the Fusilier Complex, a private shooting range in Lafayette, Louisiana. Using rifles chambered in .300 Win Mag, the researchers shot four different factory ammunition loads; three of the loads were fired through rifles equipped with different models of suppressors, while the fourth load was shot unsuppressed.

Among other variables, muzzle velocities were recorded for each load. Compared to the rifles and loads with no suppression, many suppressed loads showed a slight decrease in fps, from 10- to 30-fps slower. However, depending on the ammunition used, some of the suppressed loads produced muzzle velocities 10- to 20-fps above non-suppressed loads. Will plus or minus 10- to 30-fps affect your accuracy? Not if you are shooting at steel or a big bull elk a couple of hundred yards away.

But once you go long, like 1,000 yards or more, a difference of 30-fps can and will change important variables including bullet drop and the point at which the bullet goes from super- to sub-sonic, Vaughn noted.

The only way to know the effect of your suppressor on your bullet’s velocity is to chronograph your loads with your rifle’s suppressor attached and with it off. If the velocities are the same? Your current Ballistic profile for that round is good to go. But if there’s a variation, you will want to develop a new Ballistic profile and have both profiles ready in your iPhone, iPad or laptop. Name one, “6.5 CM-UNSUPP,” for example, the other “6.5CM-Suppressed.”

This way, you will be ready for that precision shot with or without your suppressor attached.

Ballistic is the definitive ballistics trajectory calculator, intended for long-range and precision shooters who want a serious–and a seriously accurate–application. Ballistic will calculate your bullet’s trajectory, windage, velocity, energy, lead, and flight time for any valid range. The app can also compensate for atmospheric conditions such as temperature, barometric pressure, humidity, and altitude–it can even accept density of air or density altitude inputs! The world-renowned JBM Ballistics engine powers all Ballistic computations. Ballistic is used by competition shooters, long-range hunters, and the military to deliver the most precise calculations possible.

With Ballistic, you’ll be able to make the most accurate calculations for every shot, everywhere, even in areas with no cellular coverage.

For more information, please visit WWW.BALLISTICAPP.COM

Posted in Sniper Systems and Tools | Tagged , | Comments Off on Pro Tip: Ballistic App and Suppressed Rifles

Bond Arms’ Grizzly, A Fierce Firearm with a Friendly Price

Granbury, TX (July 1, 2021) – Armed with powerful claws and jaws, grizzlies are fearsome adversaries in the wild. Their Latin name, Ursus arctos horribilis, suits this powerful apex predator. Like its namesake, the Grizzly pistol is formidable, a good reason to bear arms. This single-action double-barrel pistol chambers the most powerful cartridges in Bond Arm’s Rough Series. The Grizzly inherits the premium features found on all Bond Arms, including stainless-steel barrels and frame, cross-bolt safety, retracting firing pins, spring-loaded cam-lock lever and rebounding hammer. Many expect to pay top dollar for these premium features, but Bond Arms found a way to keep its Rough Series production costs low, passing the savings on to its customers.

The Grizzly’s 3-inch barrels, with blade front sight and fixed rear sight, is chambered in .45 long colt and 2½-inch .410 bore shotshells—two potent handgun cartridges for personal defense. The Grizzly frame is compatible with all standard Bond Arms’ barrels, adding dozens of custom cartridge and barrel length combinations.

The Grizzly, Rowdy and Roughneck models form the Bond Arms’ Rough Series, a family of quality yet value-priced pistols. How do they get the prices down so low on these firearms? Each handgun uses the same stainless-steel materials and quality control standards seen in all their guns, reducing the time spent polishing and hand-finishing lowers the price. Rough Series pistols undergo a minimal cleanup and deburring, ensuring there are no sharp edges. A bead-blasted finish replaces the polished finish found on the higher-priced models. Parting lines in the metal frame and trigger guard or swirly tool marks on the barrel may be visible. Sanding and polishing the frame removes tiny casting imperfections and rough areas, but with a rough finish, these unique marks are visible, giving each pistol its own unique “character.”

Vibrant rosewood grips engraved with grizzly bear artwork dress up this distinctive derringer, and a Bond Arms logo and a checkered panel add texture to the extended grip. The pistol includes a matching leather holster embossed with a grizzly bear.

  • Grizzly Features:
  • · Stainless steel double-barrel and frame
  • · Compatible with all standard Bond Arms barrels
  • · Patented rebounding hammer
  • · Retracting firing pins
  • · Cross-bolt safety
  • · Spring-loaded, cammed locking lever
  • · Leather holster included
  • · MSRP $377
  • Grizzly Specifications:
  • · Barrel: 3-inches
  • · Overall Length: 5-inches
  • · Weight: 20 Ounces
  • · Barrel and Frame material: Stainless Steel
  • · Cartridge: .45LC / .410 bore
  • · Finish: Bead-blasted 

BOND ARMS, INC. is located in Granbury, Texas and manufactures the award-winning Bond Arms Derringer – the finest in double barrel protection. Originally organized under the name Texas Armory, the company became incorporated as Bond Arms in 1995 with the idea that the Remington Model 95 over-under, single-action derringer could be converted from an Old West anachronism into a modern & reliable handgun. The barrel and frame were redesigned to safely fire modern calibers & the entire handgun is constructed entirely from stainless steel. This makes for a pistol that’s both strong and durable.

For more information, please visit WWW.BONDARMS.COM

Posted in Western | Tagged , , | Comments Off on Bond Arms’ Grizzly, A Fierce Firearm with a Friendly Price

Winchester Ammunition Commits $100,000 to Folds of Honor Educational Scholarships

EAST ALTON, Ill. (July 1, 2021) — Winchester Ammunition announced today a $100,000 pledge to the Folds of Honor Foundation, which provides educational scholarships to the spouses and children of fallen or disabled service members of the U.S. armed forces.
“Winchester has proudly supported our U.S. Warfighters for more than 100 years on battlefields around the world. We are thankful for the opportunity to take this one step further to support the families of those heroes through our partnership with Folds of Honor,” said Winchester President Brett Flaugher.
To commemorate this partnership, Winchester recently launched a limited-edition USA VALOR™ collection of military-inspired ammunition. USA VALOR™ pays tribute to our fighting forces while supporting Folds of Honor and providing support for the bearers of their legacy through educational scholarships.
“We are so grateful for the patriots at Winchester and for the company’s generous support,” said Lt. Col. Dan Rooney, founder and CEO of Folds of Honor. “Winchester recognizes and addresses the needs of the military families we serve. These students deserve our help, and we’re thankful for Winchester’s commitment.”
Winchester remains steadfastly focused on our heritage of integrity, quality and reliability serving the U.S. Warfighter — in peace and in battle. You may learn more about our support of military and veteran causes at
Winchester.com/USAValor

About Winchester Ammunition

Winchester is the largest small caliber ammunition enterprise in the world and the leader in delivering innovative ammunition products to hunters, sport shooters, law enforcement and the U.S. Warfighter. The 155-year-old Winchester brand is built on integrity, hard work and a deep focus on its loyal customers. Learn more about Winchester by visiting Winchester.com or connecting with us on Facebook at Facebook.com/WinchesterOfficial.

About Folds of Honor

Folds of Honor is a 501(c) (3) nonprofit organization that provides educational scholarships to the spouses and children of military members who have fallen or been disabled while serving in the United States armed forces. Its educational scholarships support private-school tuition or tutoring in grades K-12 as well as postsecondary tuition (two- or four-year college/university, technical or trade school). Since its inception in 2007, Folds of Honor has awarded more than 29,000 scholarships totaling more than $145 million in all 50 states. Among the students served, 41% are minorities. It is rated a four-star charity by Charity Navigator and Platinum on GuideStar. It was founded by Lt. Col. Dan Rooney, the only-ever F-16 fighter pilot and PGA professional, who is currently stationed at Eglin AFB, Florida, as a member of the 301st Fighter Squadron. For more information or to donate in support of a Folds of Honor scholarship, visit FoldsOfHonor.org.

Posted in Ammunition, Benefits | Tagged , , | Comments Off on Winchester Ammunition Commits $100,000 to Folds of Honor Educational Scholarships

VERTX® ADDS THREE NEW PIECES TO WOMEN’S LIFESTYLE COLLECTION

Guardian Tank, Collins Henley and Trailhawk Jacket Give Women Options

Cincinnati, Ohio – Vertx®, a leading manufacturer of concealed carry apparel, packs and accessories, announced today the launch of the Guardian Tank, Collins Henley and Trailhawk Jacket. Vertx® is excited to provide all-season gear for women with the addition of the tank, henley and jacket to it’s existing Women’s Lifestyle Collection.  All three pieces are now available online at vertx.com and in-store. Customers can find their nearest dealer using the Vertx® store locator at vertx.com/store-locator.
“When we created this collection, we wanted to give women in our industry a wholistic solution,” said Angela Milligan, VP of Marketing at Vertx. “Women need clothing that can meet all their needs and that’s where Vertx® comes in.”

VTX7010 Guardian Tank in It’s Black

The Guardian Tank and Collins Henley are designed with women’s needs in mind, but don’t skimp on practical features. Like their counterparts in the men’s collection, the tank and henley both feature WeaponGuard™, a protective underlayer that guards the skin from chafing caused by gear worn at the waistline. Weaponguard™ is constructed using 37.5® Active Particle Technology that works with your natural microclimate to keep you comfortable and dry. And while the underlayer works to regulate temperature and stop holster burn, the outer layer prevents printing. The waist-skimming fit of both the tank and henley leaves just enough space to conceal your gear without looking baggy or oversized. The Guardian Tank is available for $46.99 MSRP in It’s Black and Kalamata and the Collins Henley is available for $49.99 MSRP in Warm Wine and Exhaust (Exhaust colorway coming soon).

VTX7020 Trailhawk Jacket in Nightshade

Like the tank and henley, the Trailhawk jacket has also been optimized for CCW. Concealed inside both front pockets of the jacket are zippered passthroughs that provide fast access to waist-worn gear whether it’s worn on the right or left side. For a quick re-load or additional on-body storage, the back of the jacket features an exterior pocket sized to fit AR magazines. The Trailhawk is fabricated with a water-resistant simulated wax finish, making it ideal for standalone wear or layering in colder climates. The Trailhawk Jacket is available for $119.99 MSRP in Grey Sage and Nightshade.
No matter the season, Vertx® provides the solutions women need to carry them through the day and beyond. To learn more about the Guardian Tank, Collins Henley, Trailhawk Jacket and future launches in the Vertx® Women’s Lifestyle Collection visit
vertx.com.
About Vertx®
Vertx® is a premier tactical and outdoor brand for the modern-day Prepared Professional™. Vertx® designs world-class apparel, bags and packs that are created by the best-in-class designers to combine a low visual profile with superior functionality. Since its inception in 2009, Vertx® has earned trust among the nation’s top operators for exceptional performance, fit and durability. Vertx® is a brand of Fechheimer, a Berkshire Hathaway Company.

Vertx

4545 Malsbary Road

Cincinnati, Oh 45242

Posted in Apparel | Tagged , , , | Comments Off on VERTX® ADDS THREE NEW PIECES TO WOMEN’S LIFESTYLE COLLECTION

PRIMARY ARMS GOVERNMENT ANNOUNCES FREE AR-15 SWEEPSTAKES FOR LAW ENFORCEMENT, MILITARY, AND FIRST RESPONDERS

Primary Arms Government


HOUSTON, TEXAS – Primary Arms Government has just announced a new AR15 giveaway, open only to Law Enforcement, Military, and First Responders. The Primary Arms Government ‘Duty Rifle Sweepstakes’ offers qualified individuals a chance to win a new rifle package, featuring a Springfield SAINT Victor 5.56 AR-15 and the new Primary Arms Optics SLx® MD-25 ACSS® Red Dot Sight.
For rules and entry, please visit the
Primary Arms giveaway landing page. The winner will be required to show relevant credentials to claim the prize.
The Springfield SAINT Victor is a true duty-grade rifle, chambered in 5.56 NATO with a 1:8 twist rate that offers reliable performance and the flexibility to shoot any projectile you prefer, from ultra-light to heavy-duty. The upper and lower receivers fit together with Springfield’s proprietary Accu-Tite tension system, which means rattle-free functionality and better accuracy. The SAINT sports upgraded furniture from Bravo Company, like a 6-position collapsible buttstock and a low-profile handguard equipped with M-LOK technology.
For this giveaway, the Primary Arms is also including the new SLx MD-25 ACSS Red Dot Sight. This optic recently won special recognition from the National Tactical Officers Association (NTOA) for its exceptional field performance, and the 2021 Industry Choice Awards even named it this year’s ‘Red Dot Sight of the Year’. The core of the MD-25 is its 25mm aperture, which is larger than conventional micro dots, offering a wider field of view and reduced housing obstruction. This optic also features new emitter technology that gives its illumination a broader spectrum, ranging from night vision compatibility to full sunlight brightness. By including the ACSS CQB reticle, Primary Arms Optics gives users additional ranging and holdover tools that make it easy to acquire and engage targets from point-blank to long range.

“We’re pleased to launch this new giveaway for qualified professionals and veterans.” says Dina Sanders, Primary Arms’ Brand Marketing Manager. “After our first Service Pistol Sweepstakes, we knew we had to follow up with an even bigger grand prize. This month’s rifle and optic package are a perfect fit for the occasion.”

Primary Arms Government


Our mission at
Primary Arms Government is to ensure every officer has the tools and equipment they need to do their job as safely and as effectively as possible, so at the end of the shift, they all go home. With 13 years of manufacturing, retailing, and wholesaling experience, Primary Arms opened its Government division in 2019, supporting professionals with access to over 600 top brands across 150+ product categories. With a (1) business day quote response turnaround time, Primary Arms offers industry-leading service with no minimum order quantity. In addition, Primary Arms provides its partners a full suite of complimentary amenities, including Agency demo days and T&E opportunities, a complete trade-in program, technical product support, and more. Primary Arms Government is the exclusive distributor for the patented ACSS reticle, available in various configurations with Primary Arms Optics’ duty-proven products. Primary Arms Government is also one of Texas’s Authorized Glock Law Enforcement Distributors.

For more information on Primary Arms Government, visit the company website or contact:
Primary Arms Government Sales Team
713-570-1905
governmentsales@primaryarms.com

Posted in Promotions | Tagged , | Comments Off on PRIMARY ARMS GOVERNMENT ANNOUNCES FREE AR-15 SWEEPSTAKES FOR LAW ENFORCEMENT, MILITARY, AND FIRST RESPONDERS

It Was Not High Waters from Climate Change

Graphic showing the order of collapse of the building
A week ago today at approximately 01:30 the Champlain Towers of Surfside, Florida collapsed. As of this writing, the cause is unknow and will not be fully understood for quite some time; however,18 cadavers have been recovered and authorities estimate that 147 people are still missing. Calling a tragedy is an understatement and rescue workers face increasing peril. To their credit, they’ve shown exceptional courage and dedication, which is the reason why it pisses me off when I hear an individual suffering from crania-vaginal inversion suggest to America’s audience that rising waters from climate change could be the cause of that collapse. I am familiar with the area and at it’s highest point, Surfside is 3 feet (1m) above sea level; a handful of fat tourists wading in the ocean is enough to flood Collins Ave.
Although, this opportunist imbecile pissed me off, I refuse to see a therapist. Why the hell would I pay $150 per hour to a jackass who majored in psychology so they could understand themselves, scheduling a good shoot the shit is far better. I’m so confident of that statement that I would recommend it to Mayor Charles Burkett. Mayor, schedule a shoot the shit for families and next of kin.
What is a shoot the shit? It’s a social interaction during which any subject can be discussed, participants need not know anything about the subject and are free to make unsupported statements, use uncensored profanity, insult anyone they wish or change the subject altogether. Mayor bring some food in for them and let them go at it. If you turn a psychologist loose on these poor folks they’re liable to come out with a desire to undergo a sex change, or feeling that they’re suffering from a short penis complex. So, let’s shoot the shit about climate change.
This week, I’d like to show you how our approach to climate change is the textbook definition of legislation by anal extraction. So, let’s get started.

  1. We have a government that is actively curtailing fossil fuel production before alternative sources are implemented – that’s anal extraction.
  2. We have a government that is driving taking down coal and gas energy production that’s currently powering the grid 24×7 with solar and wind sources that are lower output, and in the case of solar useless for at least 12 hours of the day – that’s anal extraction.
  3. We live on a planet that is only 25%-30% land mass of that 33% is habitable and roughly 50% of that 33% is used for agricultural purposes. Rather than moving to nuclear power our government wants solar panels. A nuclear power plant occupies roughly 1.86 square miles and that includes employee parking, a solar panel farm to match the output of a nuclear power plant requires about 180 square miles, wind farms about 80 square miles – that’s anal extraction.
  4. Our government wants to ban all fossil fuel vehicles by 2030. You’ll be driving electric cars equipped with Chinese made lithium ion batteries, so if you want to take the kids to the Grand Canyon you’ll need charging stations every 300 miles or so. Furthermore, you and your family will be traveling on a potential bomb. I have a short video that shows you how lithium batteries react in water. Lithium is highly reactive and generates hydrogen in the process, which in concentrations of 4% or higher is explosive. Watch the video – this is anal extraction.
All of these steps are being blindly implemented, There is no structured plan or any indication of a clear understanding of the issues but more importantly there is a childlike disregard for the consequences. Have you heard any discussion from our government about DAC (Direct Air Capture). I’ll get you dialed in.
Direct Air Capture is a CO2 capture technology that “scrubs” CO2 from the atmosphere. Without getting into the chemistry, think of it as a tree, which as you know captures CO2 via photosynthesis . The difference is that a 1 million ton per year DAC facility has the same effect as 40 million trees. Why isn’t that being discussed and aggressively funded. If you want to gain a good understanding of DAC visit 1PointFive’s web site, they do a great job of presenting the technology with a non-technical treatise, My guess is that our government is clueless and operating with a mindset that says “my mind is made up don’t confuse me with facts.”
Have a great weekend, be safe and for God’s sake schedule a shoot the shit with your buds and or family.
Posted in Shoot-the-shit | Tagged , , | Comments Off on It Was Not High Waters from Climate Change

ECA GROUP upgrades its drone IT180 for special forces applications

ECA GROUP

ECA GROUP upgrades its drone IT180 for Special Forces applications

ECA GROUP provides special forces with Over-the-Hill reconnaissance capabilities, day and night, by integrating the Controp EO/IR camera on its IT180 UAV.
The
IT180 UAV (Unmanned Aerial Vehicle) as part of ECA GROUP’s unmanned systems range, is a long-endurance Vertical Take-Off and Landing (VTOL) aerial drone. The IT180 is renowned for its discretion, robustness and long endurance. Coupled with the exceptional optical performance of the new generation hi-performance Controp camera, this combined solution is ideally suited to the challenging demands of special forces for long range identification, Intelligence, Surveillance, Target Acquisition & Reconnaissance (ISTAR) missions, enabling Over-the-Hill reconnaissance both in daytime and at night. Its effectiveness is battle proven. The Controp camera also offers real-time Situation Awareness and Tactical Response.
ECA GROUP and Controp teams have worked together to integrate the video suite ( camera and data transmision) and combine the high performance of the image solution with the reliability of the IT180 UAV.

IT180 Unmanned Aerial Vehicle – Versatile, Robust, Proven

ECA GROUP’s IT180 has been designed to carry a variety of payloads including various cameras and data transmission technology to meet the multiple needs of special forces, armies and Homeland Security forces on all types of missions involving long range identification, Intelligence, Surveillance, Target Acquisition & Reconnaissance (ISTAR), drifting mine detection, communication and permanent surveillance.

The IT180 UAV is a resilient, long-endurance high performance UAV proven in battle; the French army has been using the IT180 in reconnaissance missions since 2016 and is particularly satisfied with its performance and robustness in harsh conditions.

This state-of-the-art UAV has a low acoustic signature, a communication range of up to 30 km and withstands rugged environments and conditions (up to 60 km/h winds, dust, snow, sea and moderate rain), day and night.

Controp camera for target visualization > 10 km

The Controp camera is unique in the quality and resolution of its images, usually only found on larger UAV payloads. Its very high-range spectral bands enable it to visualize targets at long distances (> 10 kms) with high contrasts dynamics, even in high humidity conditions including coastal fog. It can perform with low acoustic signature, on ISTAR missions in low light / night conditions.

The combination of ECA GROUP’s IT180 UAV and the Controp camera perfectly meets information control and data confidentiality requirements, inherent in special forces operations.

ECA GROUP is unveiling its IT180 UAV and Controp EO/IR Camera integrated solution at the SOFINS special forces event, from 29 June to 1 July, Souge en Gironde, France.

CONTACT

Respectfully,
Meliha BOUCHER
Mob: +33 (0)6 99 31 45 29
boucher.m@ecagroup.com

Posted in UAV, USSOCOM | Tagged , , | Comments Off on ECA GROUP upgrades its drone IT180 for special forces applications

Sneak Preview: Howard Leight Impact Sport In-Ear

Howard Leight introduced electronic hearing protection that’s extremely light, comfortable, effective and won’t get in the way of your cheek weld.

Posted in Hearing Protection | Tagged , , | Comments Off on Sneak Preview: Howard Leight Impact Sport In-Ear

HOLOSUN expands Green LED Pistol Optic lineup

City of Industry, Ca. (June 30, 2021) – HOLOSUN adds three new pistol optics with Super Green LED technology. At 540nm, HOLOSUN’s Super Green LEDs are closest to the wavelength the human is most sensitive to. Over the next few weeks HOLOSUN will roll out three new Super Green LED models: HE507K-GR X2, HE509T-GR, and HE407K-GR X2.

Green LED optics are becoming more and more popular within competitive, self-defense, and law enforcement circles due to the intense, high-contrast green reticle and increased battery life. The Super Green LED has three times the battery life compared to red at the highest intensity settings providing even more confidence that your HOLOSUN optic will be ready when you need it.

Designed for concealed carry or backup firearms, the HE507K-GR X2 features HOLOSUN’s Multi-reticle System (MRS) with fast acquisition 32MOA/2MOA Circle-Dot reticle. For those who prefer a simpler sight picture, the HE407K-GR X2 features a 6MOA dot only.

HE509T-GR is HOLOSUN’s answer to the pistol optic durability question. With independent testing seeing 20,000 rounds of accelerated use including dozens of shoulder height drops, the enclosed design and grade-5 titanium housing of the HE509T take durability to another level.

With innovations including side-mounted battery tray, Lock Mode, up to 50,000-hour battery life, Shake Awake, and Solar Failsafe (HE509T), HOLOSUN optical sights adapt to any environment for defensive, professional, and sporting users alike.

For more information, please visit: WWW.HOLOSUN.COM

Holosun Technologies, Inc., located in City of Industry, California, is committed to

creating innovative optic and laser/IR technologies that benefit a broad range of

shooting, hunting, law enforcement and professional needs. Using the quality

manufacturing standards demanded by some of the best-known optics brands in the

world, with a wide range of affordable options, Holosun is at the forefront of

development of new sight technologies. Key innovations include Shake Awake

TechnologyTM, 50,000-hour battery life, Solar FailSafeTM, Multiple Reticle SystemTM

(MRS), Super Green LED, and IR/Laser units that utilize the most recent advancements

in laser and LED technology. At Holosun, we pride ourselves on providing cutting-edge

equipment at a competitive price that astounds the competition and the end-user.

Posted in sights | Tagged , , , | Comments Off on HOLOSUN expands Green LED Pistol Optic lineup

Premier Body Armor Announces Core Plate Carrier with Level IIIA Cummerbund Armor

Premier%20Body%20Armor%20Core%20Plate%20Carrier

Premier Body Armor Announces Core Plate Carrier with Level IIIA Cummerbund Armor

GASTONIA, N.C. – June 30, 2021 – Premier Body Armor is pleased to announce a new armor solution: the Core Plate Carrier with Level IIIA Cummerbund Armor. Balancing durability and high-speed performance, the Core Plate Carrier is the ideal lightweight plate carrier, and it is compatible with many types of armor and comes with two Level IIIA Cummerbund inserts.

“The new Core Plate Carrier can serve as the foundational chassis for any mission,” said Jason Mammano, Vice President of Marketing and Communications at Premier Body Armor. “The combination of traditional Molle webbing and Velcro Molle panels makes the design endlessly customizable. The Core Plate Carrier is built for those looking for maximum versatility in an American Made plate carrier for the foundation of their tactical kit.”

Balancing durability and high-speed performance, the Core Plate Carrier is compatible with 10” x 12” plates. The design seamlessly integrates traditional Molle webbing and Velcro-covered laser-cut Molle sections and makes carrying a heavy kit just as natural as going light.

A chest placard can be easily attached to the full-field of Velcro on the front of the plate carrier, and medical gear, hydration bladders, and more can be added on the rear. Both the outside and inside of the cummerbund feature traditional Molle webbing so you can add gear on either side.

Features:

  • Two Level IIIA cummerbund inserts
  • Accommodates all 10″x12″ PBA Plates  (sold separately)
  • Adjustable cummerbund with FirstSpear® ™Rapid-Release Technology.
  • Reinforced “man down” strap
  • Laser-cut Molle
  • Constructed of a domestically sourced 600 Denier Polyester
  • Weight with Level IIIA Cummerbund Ballistics 4.2—4.8 LBS

About Premier Body Armor

Premier Body Armor was founded in 2013 with the goal of protecting and empowering Law Enforcement and law-abiding citizens with innovative armor solutions, Made in the USA. Built on the backbone of over 20 years of armoring experience for customers such as the United States Special Operations Command (USSOCOM), the United States Marine Corps (USMC), PBA is innovating and changing the way body armor is both perceived and utilized. Bulletproof backpack inserts, ultra-discreet vests, and more have made body armor more practical for daily use than ever before. With partnerships across industries, powerful community engagement, and top-notch customer service, Premier Body Armor is one of the top body armor manufacturers in the USA.


Premier Body Armor, 1552 Union Rd., Suite E, Gastonia, North Carolina 28054, United States

Posted in Ballistic Protection, Load Bearing | Tagged , , | Comments Off on Premier Body Armor Announces Core Plate Carrier with Level IIIA Cummerbund Armor

Galco’s Wraith 2.0 Belt/Paddle Holster!

Header Logo

Galco’s Wraith 2.0 Belt/Paddle Holster!

PHOENIX, June 2021
Galco’s Wraith 2.0 features four patent-pending innovations that create a highly versatile and concealable multipurpose holster.
Combining the best properties of Premium Center Cut Steerhide™ and injection-molded plastic, the Wraith 2.0 includes a “trench” style sight rail that easily accommodates most suppressor sights and allows easy, efficient return to the holster. A reinforced thumb-break retention strap provides secure retention with a fast draw, while the modern layout is designed to accommodate most red dot sights.
The Wraith 2.0’s versatility derives from its included twin attachment methods – an adjustable belt slot and a paddle – that are quickly and easily interchangeable by the end user. A flat-headed screwdriver is the only tool needed to swap one attachment for the other, giving the gun carrier the choice of two carry methods: the convenient paddle design or the stable and traditional belt slot.
Available in black for over 90 different guns, the Wraith 2.0 fits belts up to 1¾” wide.
See Galco’s complete line of paddle holsters at
galcoholsters.com!



Dealer inquiries:
800-874-2526 
dealersales@galcoholsters.com

Galco International, LTD is the designer and manufacturer of the Galco Holsters brand, the premier American-made line of superb-quality holsters, belts and accessories. Encompassing law enforcement, military, defensive and sporting use, the Galco brand utilizes leather, nylon and Kydex to meet the demands of today’s consumers. Women’s holster handbags, tactical slings and hunting accessories round out the line. All Galco products are proudly handcrafted in the USA since 1969.

Footer Logo


Footer Logo

Galco International | 2019 West Quail Avenue, Phoenix, AZ 85027

Posted in Holsters | Tagged , , , , | Comments Off on Galco’s Wraith 2.0 Belt/Paddle Holster!

Henry Sponsoring Kevin Harvick’s Ride at Road America

Henry Repeating Arms

Henry Repeating Arms Sponsoring Kevin Harvick’s Xfinity Series Ride
at Road America

Harvick Henry 180

RICE LAKE, WI – June 30, 2021
Wisconsin-based firearms manufacturer Henry Repeating Arms is announcing primary sponsorship of Kevin Harvick’s entry for the Henry 180 NASCAR Xfinity Series race at Road America (Wi.) on July 3 with the #99 B.J. McLeod Motorsports Henry Repeating Arms Ford Mustang.

The partnership marks Henry Repeating Arms’ 5th primary sponsorship of a NASCAR Xfinity Series car. Additionally, its return to Road America marks the 2nd consecutive year as the race title sponsor.

Henry Repeating Arms operates a 135,000+ square foot facility in Rice Lake, Wisconsin, manufacturing rifles and shotguns a few hours west of Road America. Over 100 Henry employees and their families are attending the race in addition to Henry ambassador and UFC fighter Donald “Cowboy” Cerrone. Henry Repeating Arms also invited 180 active-duty members or veterans of the U.S. military to attend free of charge.

Fans attending the race will have the opportunity to win one of two custom Henry 180 Edition rifles in a giveaway at Henry’s fan experience display trailer. The prize rifles are identical to those presented at victory lane to the pole qualifying winner and the race winner.

“We are counting down the days until we can get out to Road America for what is going to be a huge, patriotic weekend. You can’t go wrong with the mix of guns, gears, and fireworks right in our back yard at one of the beautiful motorsports venues in the country,” . . . “We are big Harvick fans, so to have him behind the wheel is exciting for us. Being first through the checkered flag in the Henry car at the Henry 180 would be the cherry on top.
No pressure, Kevin.”
says Anthony Imperato, President and Owner of Henry.

The Henry 180 NASCAR Xfinity Series race will be televised live at 2:30 PM ET on NBC, Saturday, July 3.

Henry firearms are purchasable only through a licensed firearms dealer. For more information about Henry Repeating Arms and its products, visit henryusa.com or call 866-200-2354.

Posted in Western | Tagged , , , | Comments Off on Henry Sponsoring Kevin Harvick’s Ride at Road America

Magpul Slings

Magpul

FIREARMS ACCESSORIES APPAREL+GEAR SALE COMMS

Our line of slings is designed to meet your mission and your needs. Whether you need the direct-action maneuverability of a one-point sling, the stability of a two-point, or the ability to switch between both, our slings and sling hardware provide a reliable, adjustable, weapon-retention system for everything you’re up to. Find what you need at Magpul.com.

Our slings are made of heavy-duty nylon and include indestructible hardware to provide flexibility and durability. Comfortable for all body types and designed without tails or loops, the webbing is snag-free and includes a Near Infrared (NIR) treatment to reduce its IR signature.

MS3® Sling GEN2

MS3® Sling GEN2
$49.95

MS1® QDM Sling

MS1® QDM Sling
$74.95

With our wide variety of mounts and adapters, you can find a sling solution that fits you and attaches securely to your weapon system. From our QDM – Quick Detach Sling Mount to our Paraclip™ sling attachment point, you’ve got options. 

MS4® Dual QD Sling GEN2

MS4® Dual QD Sling GEN2
$59.95

Magpul® RLS Sling

Magpul® RLS Sling
$19.95

Magpul Slings


Posted in Accessories | Tagged , , , , | Comments Off on Magpul Slings

Polling Shows Pennsylvanians Oppose Chipman for ATF

NEWTOWN, Conn. — Nearly 6 out of 10 Pennsylvania voters oppose President Joe Biden’s nominee David Chipman to run the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). A survey conducted for the National Shooting Sports Foundation® (NSSF®), the firearm industry trade association, showed 58 percent of voters cannot support the gun control lobbyist to run the federal law enforcement bureau.

“This is compelling data Pennsylvania’s senators must consider when the Senate votes on whether to confirm Mr. Chipman to head the ATF,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “Pennsylvanians clearly reject the nomination of David Chipman because they know it is wrong to politicize the ATF. The senators were elected to represent the interests of Pennsylvanians in Washington, D.C. They need to respect the clear wishes of their constituents and vote against this biased and unqualified nominee.”

The survey of 500 likely General Election voters was conducted June 24-26 and showed that when presented with the facts on Chipman’s false statements of .50-caliber rifles downing helicopters during the raid on the Branch Davidian compound in Waco, Texas, allegations of racially-insensitive remarks toward fellow ATF agents, his intent to shut down firearm retailers and his comments denigrating first-time gun buyers as “preppers” for a “Zombie apocalypse,” support among respondents dropped by more than 10 percent.

The survey also revealed that strong support for Chipman’s confirmation dropped from 23 percent to just 12.6 percent and overall opposition to Chipman’s confirmation rose to 58 percent when likely Pennsylvania voters were presented with the same information.


About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, log on to www.nssf.org.

Posted in NSSF/NRA | Tagged , , | Comments Off on Polling Shows Pennsylvanians Oppose Chipman for ATF

MWSF Benefit Dinner at the Brazos River Sportsman’s Club Raises over $173,000

MWSF Benefit Dinner at the Brazos River Sportsman’s Club Raises over $173,000


FULSHEAR, TX (June 30, 2021) – Military Warriors Support Foundation attended the Brazos River Sportsman’s Club for dinner and a live auction fundraiser. This event, a first for MWSF, raised money for the Skills4Life program. In addition, this event was scheduled to include a shootout, however, due to weather that portion of the event is being rescheduled. The Skills4Life program has helped many Wounded Heroes and Gold Star Families attend and participate in events throughout the year.

Brazos River Sportsman’s Club and the owner Leigh John Bentley showed their support by hosting the event. This club features a 10-lane pistol range, several rifle ranges (25, 52, 100, and 200 yards), tactical training, clay shoots and women’s-only training. With enough space, the club can host a small or large event that can fit any reasonable needs.

A dinner and live auction was held at Anthonie’s Market Grill. Anthonie Dekker, the proprietor, is a Dutch-born chef who has had the pleasure of cooking for many notable individuals. In addition, Bubba Strait, Kyle Park, John Michael Whitby and Jason Roberts made an appearance and performed for everybody that attended. This band has strong ties to George Strait, a supporter of Military Warriors Support Foundation. With George Strait’s help, MWSF has presented homes and vehicles to Heroes and Gold Star Spouses on stage. The dinner and auction at Anthonie’s was a tremendous success and raised over $173,000.

The Skills4Life Program began in 2007 and currently provides recreational outdoor experiences and mentorship. Skills4Life programs are open to combat-wounded veteran Heroes and Gold Star Spouses. Various gatherings throughout the year – such as the Shootout on the Brazos – allow organizers to support the Heroes and their families. Some events are even developed for these Heroes’ children and spouses. With events and support from Leigh John Bentley and Anthonie Dekker, Skills4 Life will be able to continue their support for Heroes and Gold Star Families.

If you or someone you know would like to apply, please visit our website at: https://militarywarriors.org

About Military Warriors Support Foundation

Military Warriors Support Foundation is a 501(c)(3) non-profit charity, founded by LTG Leroy Sisco (Ret), in 2007. Their mission is to provide support that facilitates a smooth and successful transition for our nation’s combat-wounded heroes and Gold Star families. Their programs focus on housing and homeownership, recreational activities, transportation assistance and leadership development. Through their programs, they have awarded nearly 900 mortgage- free homes and 100 payment-free vehicles to combat-wounded heroes, Gold Star spouses and their families in all 50 states. In addition to the home or vehicle, the families receive family and financial mentoring. For more information, visit: MilitaryWarriors.org

For more information, please visit

www.militarywarriors.com

Posted in Benefits | Tagged , , , | Comments Off on MWSF Benefit Dinner at the Brazos River Sportsman’s Club Raises over $173,000

Competitive Sporting Clays Shooter Derrick Mein Wins Kansas State Championship

ANOKA, Minnesota – June 29, 2021 – Federal Ammunition sponsored shooter Derrick Mein has won his 14th Kansas State Championship Title. The Powder Creek State Sporting Clays Championship was held June 24-27 in Lenexa, Kansas. Powder Creek Shooting Park is a premier shotgun shooting facility, servicing a large area near Kansas City, Missouri. Mein topped the podium as Powder Creek Cup Champion, Prelim Runner-Up, and Promatic Cup Champion. The outstanding accomplishment is additional fuel for his preparations to compete in the upcoming Tokyo games.
“Mein is certainly one of the top shooters in the world and has been burning up the circuit all summer long in multiple disciplines. He will also be one of the trap shooters to represent the U.S.A. in Tokyo this July,” said Federal’s Vice President of Marketing Jason Nash. “We are eager and excited to see his performance—and all of our sponsored shooters on the USA Shooting team—during the games this year.”
“I have been shooting a lot of Federal Gold Medals at various competitions this year to get ready for the Olympics. Federal’s consistency, quality and reliability allow me to focus on my skills without worry,” said Derrick Mein. “I fully expect to put forth my best effort at this year’s Olympic Games. I will represent our country with dignity. There is no greater honor than to get to represent the USA in the largest and most prestigious sporting event in the world.”


Federal is the official shotshell ammunition sponsor and supplier of USA Shooting, a non-profit organization that promotes the shooting sports and prepares American athletes to bring home gold. Federal is also a large supporter of the Amateur Trap Association (ATA), National Skeet Shooters Association (NSSA), National Sporting Clays Association (NSCA), and many other national, regional and state shooting sports organizations.
Federal ammunition can be found at dealers nationwide or purchased online direct from Federal. For more information on all products from Federal or to shop online, visit http://www.federalpremium.com.

Posted in Ammunition | Tagged , , | Comments Off on Competitive Sporting Clays Shooter Derrick Mein Wins Kansas State Championship

Remington Ammunition and Partners Building Sporting Clays Course for Arkansas Youth

Image

 

Remington Ammunition and Partners Building Sporting Clays Course for Arkansas Youth

Lonoke, Arkansas – June 29, 2021Remington Ammunition, in partnership with the Arkansas Game and Fish Foundation, has been named the recipient of a generous MidwayUSA Foundation Range Development Grant. The grant has been awarded to the Arkansas Game and Fish Foundation and will be used at the Remington Gun Club facility to build a new sporting clays course. This state-of-the-art facility will be open to youth as well as shooters of all ages. The course is on track to open late summer 2021.

“Remington looks forward to hosting thousands of youth shooters from across the nation for future events at our gun club,” said Jon Zinnel, Conservation Program Manager for Remington Ammunition. “Without the grant from the MidwayUSA Foundation and the support of the Arkansas Game and Fish Foundation, building this new course wouldn’t have been possible.”

The clays course will be a welcome addition to Remington’s historic Gun Club, a public trap and skeet club located on the grounds of the Remington Ammunition plant in Lonoke, Arkansas. The club, also soon expanding to include a retail store addition, welcomes thousands of shooters annually and is open year-round.

“Remington Ammunition’s addition of a sporting clays facility will provide Arkansas youth with a top-notch sporting facility to practice and compete,” said Deke Whitbeck, President of the Arkansas Game and Fish Foundation. “We look forward to our partnership with Remington Ammunition and introducing thousands of Arkansas youth to another clay target shooting opportunity.“

The MidwayUSA Foundation is a 501(c)(3) public charity working to sustain and grow the shooting sports industry by providing long-term funding to youth shooting teams. Every donation made is tax-deductible and allows the Foundation to assist in expanding and enhancing the leadership, skills, confidence and disciple of today’s youth through shooting sports activities.

To be the first to hear about product availability, exciting new products and everything Remington ammo, visitors to www.remington.com

Posted in Ammunition | Tagged , | Comments Off on Remington Ammunition and Partners Building Sporting Clays Course for Arkansas Youth

Streamlight’s TLR-10 a Laser/Light Accessory for Your Large Frame Pistol

Picture1

If you own a large frame pistol, you will find no better light/laser accessory for your weapon than Streamlight’s TLR-10. Its 1000 lumens of output will pierce through darkness with ease, and its laser aiming will see you through situations where using sights may not be tactically desirable.

Read my review…

Posted in Laser Based Technologies, Tactical Lighting | Tagged , , , | Comments Off on Streamlight’s TLR-10 a Laser/Light Accessory for Your Large Frame Pistol

SKYDEX and Helmet Comp Team Up to Launch Revolutionary Helmet Protection System

New SKYDEX IsoFit Helmet Protection System improves operational effectiveness with industry leading protection and unique custom fit liner


CENTENNIAL, Colo. (June 2021)SKYDEX, a global leader in advanced impact mitigation and energy absorption solutions, today announced that the company has partnered with Helmet Comp to design the next generation of helmet protection and introduce the new, state-of-the-art SKYDEX IsoFit Helmet Protection System.

The combined expertise of SKYDEX and Helmet Comp will benefit the tactical helmet industry, as they partner with best-in-class technologies to improve user fit and impact protection for those in the military and law enforcement communities. With incredible energy absorbing capability and an unrivaled fit system, together these innovators aim to reshape the future of helmet protection.

“By combining the impact protection expertise of SKYDEX and the fit expertise of Helmet Comp, we will help solve the challenges tactical helmet users have faced for years and improve operational effectiveness,” said Collin Metzer, Director, Blast & Ballistics at SKYDEX. “We shared a vision with Helmet Comp to create a new helmet protection system that offers users comfort without compromising protection. The early reception from industry end users has been overwhelmingly positive.”

The SKYDEX IsoFit Helmet Protection System features superior impact protection with an industry-leading energy-absorption pad system that can be easily integrated into any tactical helmet. With a patented system and 8-points of adjustment, the IsoFit line provides a customized fit and unmatched helmet stability to minimize distractions while users are in action. An added benefit includes open-airflow, designed to keep heads cool and dry in hot environments, combined with superior protection and fit, all of these elements offer users a safer and more comfortable experience, improving operational effectiveness. SKYDEX has launched limited quantities of this new Helmet Protection System for pre-order, and will announce additional details in the coming weeks.

“Collaborating with the passionate team at SKYDEX on the new SKYDEX IsoFit Helmet Protection System has been a rewarding project,” said Brad Maloney, CEO & Founder at Helmet Comp. “Our partnership of shared ideas and technologies will help the company continue its mission of protecting people across the globe. We’re grateful for the opportunity to be a part of the future of helmet protection with SKYDEX and to revolutionize a design that makes it not only safer, but easier for users to do their job while in action.”

To learn more about SKYDEX’s early adoption program and to sign up for the limited release of the new IsoFit Helmet Protection System available fall 2021, please visit https://www.skydex.com/product/skydex-isofit-helmet-protection-system.

SKYDEX and Helmet Comp Team Up to Launch Revolutionary Helmet Protection  System | Frag Out! MagazineAbout Helmet Comp
Founded in 2012, Helmet Comp specializes in developing new helmet component technologies to improve many aspects of helmet design and performance for OEM helmet brands. A dynamic and driven team of designers, engineers, and business leaders, Helmet Comp fosters the building of brand relationships and the streamlining of the design integration process to accelerate new and proven technologies to a marketable phase faster. For more information about Helmet Comp, please visit
https://helmetcomp.com/.

About SKYDEX
Founded in 2001 and based in Centennial, Colorado, SKYDEX is a global leader in advanced impact mitigation and energy absorption solutions. From armored vehicles to bomb suits, helmets and body protection, running shoes and wall padding for baseball fields, SKYDEX is driven by a single purpose: “Protecting People and Things That Matter.” With technical expertise and proprietary geometries, advanced SKYDEX materials are used to protect hundreds of thousands of lives across a wide range of applications, such as vehicle protection, marine performance, sports protection, blast and ballistics, work wear/PPE, electronics and more. Backed by a passionate team of engineers and incredible technologies, SKYDEX solutions outperform traditional materials. To learn more, visit
https://www.skydex.com/.

Posted in Ballistic Protection | Tagged , , | Comments Off on SKYDEX and Helmet Comp Team Up to Launch Revolutionary Helmet Protection System

Green Means Safe: The HE407K-GR X2 Now Comes with Green Reticle

City of Industry, Ca. (June 29, 2021) – When it comes to self-defense pistol optics, there isn’t room for failure. One of the best self-defense optics produced by Holosun is being reintroduced with a wavelength change that provides a green reticle. The 407 series already have a reasonably large reticle, at 6 MOA, which helps during close-quarters defense. An addition of a green reticle makes this a more attractive option for EDC.

A green reticle appears brighter to the human eye than standard red at the same intensity. Pair this increased intensity, larger reticle, and the ability to be more readily seen in daytime light conditions make this a prime and efficient choice for users.

A 1632 battery can power the Super Green LED for up to 50,000 hours. With Shake Awake the life of the battery — and overall effectiveness — of the optic is much greater. The efficiency of the 407K’s green LED coupled with the large, 6MOA green dot creates the ideal carry package.

Weighing in at a mere 1 oz, the HE407K-GR X2 may be the next best thing for defensive carry. At 1.60” long, 0.98” wide, and 0.95” tall, it’s able to be adapted to both full-size, compact and subcompact pistol types. The uses are endless. If you’re a competition shooter or carry an EDC defensive firearm, HOLOSUN has you covered.

Check out the new green LED HOLOSUN models for yourself and improve your precision and efficiency with innovation from HOLOSUN.

Specs:

· 6 MOA Dot

· Light Wavelength of 540nm

· Green Reticle Color

· Parallax Free

· Unlimited Eye Relief

· 1x Magnification

· Multi-Coated Optical Glass

· CR1632 Battery

· 50,000 Hour Battery Life

· 10 DL&2 NV Brightness Settings

· Anodized 7075 T6 Aluminum Construction

· Window Size 0.58” x 0.77”

· Exterior Dimensions 1.60” x 0.98” x 0.95”

· 1 Oz. Weight

· IP67 Water Resistance

Holosun Technologies, Inc., located in City of Industry, California, is committed to

creating innovative optic and laser/IR technologies that benefit a broad range of

shooting, hunting, law enforcement and professional needs. Using the quality

manufacturing standards demanded by some of the best-known optics brands in the

world, with a wide range of affordable options, Holosun is at the forefront of

development of new sight technologies. Key innovations include Shake Awake

TechnologyTM, 50,000-hour battery life, Solar FailSafeTM, Multiple Reticle SystemTM

(MRS), Super Green LED, and IR/Laser units that utilize the most recent advancements

in laser and LED technology. At Holosun, we pride ourselves on providing cutting-edge

equipment at a competitive price that astounds the competition and the end-user.

For more information, please visit www.holosun.com


Posted in sights | Tagged , , | Comments Off on Green Means Safe: The HE407K-GR X2 Now Comes with Green Reticle

Ministry of Defense orders capability upgrade of 154 PUMA infantry fighting vehicles

Structure - KMWRheinmetall Awarded €501 Million Contract to Upgrading Puma Infantry  Fighting Vehicle - MilitaryLeak

Koblenz/Kassel, 28.06.2021. Projekt System & Management GmbH (PSM), a joint venture of Krauss-Maffei Wegmann (KMW) and Rheinmetall, has signed a contract with the German Federal Office of Bundeswehr Equipment (BAAINBw) to retrofit 154 PUMA infantry fighting vehicles in service with the Bundeswehr. The contract also covers logistical services such as special tools and replacement parts as well as the design of additional capability upgrades.
The contract is worth more than €1 billion.
In addition, further options amounting to €820 million were agreed to upgrade the remaining 143 Puma infantry fighting vehicles by 2029.
The retrofitting of the first 154 vehicles will take place in the core capabilities of firepower and command & control. They will thus be brought up to the modern standard that has already been tested for the 40 PUMA vehicles that will be deployed in NATO’s VJTF rapid response force from 2023. The measures include in particular:
– Integration of the guided missile system MELLS
– Preparation for integration of a turret-independent secondary weapon system (TSWA)
– Integration of high-resolution, day- and night-vision camera systems for the driver and the mounted infantry section
– Integration of state-of-the-art, color-enabled optronics for gunner and commander
– Connection of the soldier system “Infantryman of the Future – Expanded System” (IdZ-ES) and the Battle Management System (BMS)
– Integration of new digital radio units
With the upgraded PUMA infantry fighting vehicles, the Bundeswehr will then have a fully digital and networked weapon system that has
already impressively demonstrated its decisive value in all tactical investigations and in realistic combat scenarios.



For further information, please contact:

Dr. Kurt Braatz
Senior Vice President Strategy and Corporate Communications
Krauss-Maffei Wegmann
GmbH & Co. KG
Krauss-Maffei-Str. 11
80997 Munich
Germany
Tel.: +49 89 8140 4675
Fax: +49 89 8140 4977
E-Mail: kurt.braatz@kmweg.de
www.kmweg.de


Krauss-Maffei Wegmann, a member of the German-French defense technology group KNDS, leads the European market for highly protected wheeled and tracked vehicles. At locations in Germany, Brazil, Greece, Singapore, the United Kingdom, Hungary and the USA more than 4.000 employees develop, manufacture and support a product portfolio ranging from air-transportable, highly protected wheeled vehicles (MUNGO, AMPV*, DINGO, GFF4 and BOXER*) through reconnaissance, anti-aircraft and artillery systems (FENNEK, GEPARD, Remote Controlled Howitzer 155, Armoured Howitzer PzH2000, DONAR* and AGM) to main battle tanks (LEOPARD 1 and 2), infantry fighting vehicles (PUMA*) and bridgelaying systems. In addition, KMW has wide-ranging system competence in the area of civil and military simulation, as well as in command and information systems and remote-controlled weapon stations with reconnaissance and observation equipment. The armed forces of more than 50 nations worldwide rely on tactical systems by KMW.
* Joint venture with national and international partners
Unless otherwise indicated, all products are registered trademarks of Krauss-Maffei Wegmann GmbH & Co. KG

Posted in Mobility | Tagged , , , | Comments Off on Ministry of Defense orders capability upgrade of 154 PUMA infantry fighting vehicles

Precision Strike Technology Symposium (PSTS-21)

2021 Fall Precision Strike Technology Symposium (PSTS-21)

Save the Date

We are excited to be back in person for the Precision Strike Technology Symposium (PSTS-21). Mark your calendars for October 19 – 21, 2021, to join us at The Johns Hopkins University Applied Physics Laboratory Kossiakoff Conference Center in Laurel, MD.

About the Event

The Precision Strike Technology Symposium (PSTS) is a SECRET//NOFORN event held annually in the Fall in the Greater Washington, DC, area that focuses on the tactical and technological challenges faced by our warfighters and the defense industry. PSTS is contextualized through high-level leadership keynote speakers, such as 4-Star Generals/Flag Officers, members of Congress, and industry leadership, as well as through timely intelligence- and warfighter-based threat briefs throughout the symposium.

For important updates, please continue to visit the event website. Information regarding sponsorship opportunities, registration, speakers, and the agenda is forthcoming.

We look forward to seeing you!

Dates

Date

October 19 – 21, 2021

Location

Location
The Johns Hopkins University Applied Physics Laboratory Kossiakoff Conference Center

Laurel, MD

Contact

Contact
Renata Casiel
Meeting Planner
(703) 247-2561
rcasiel@NDIA.org

National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201

Posted in NDIA | Tagged , , | Comments Off on Precision Strike Technology Symposium (PSTS-21)

New Compact Pistol Kit from Fix It Sticks

Fix It Sticks Introduces A New Compact Pistol Kit

Chicago, IL- Fix It Sticks, the industry innovator of modular firearms maintenance tools and torque limiters has introduced the perfect kit for handgun shooters, the Compact Pistol Kit.  Designed to work with a wide array of handguns, the new kit features tools, wrenches, hex bits and even a variable torque driver. This comprehensive selection of components can handle almost any maintenance or setup task as needed.  The Compact Pistol Kit is only slightly larger than a box of ammo, making it the perfect size to throw in a range bag, vehicle, ATV etc.
To maximize convenience and performance the kit comes with the Fix It Sticks Ratcheting T-Handle as well as the Mini All-In-One Torque Driver which is perfect for the optics commonly mounted on handguns.  Pistol specific components include a Glock sight tool and 1911 bushing wrench.

Compact Pistol Kit includes the following parts, tools and bits:

Ratchet T-Handle w/Locking Hex Drive
Mini All-In-One Torque Driver
Steel Pick
Cleaning Brush Bit
Aimpoint Bit
Glock Sight Tool
1911 Bushing Wrench
3/32″ Pin Punch
1/8″ Pin Punch
Four brass rods
Set of two 8-32 adapters
12 Electroless Nickel Plated Bits: T6, T8, T10, T15, P1, H1.5mm, H2mm, H3mm, H1/16″, H5/64″, H3/32″ Extended Bit (for adjusting hard to reach screws on optics), SL5mm.
Compact Carrying Case

The Compact Pistol Kit is contained in a soft zippered carrying case with a molded low profile bit holder that is designed to hold any bit / accessory with a standard 1/4″ Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component.  With overall dimensions of 6 1/2” x 2 5/8” x 1 5/8” this kit easily fits in glove compartments, tool storage compartments, range bags, etc.  The  Compact Pistol Kit is now available with an MSRP of $180.

Dealer and consumer inquiries: info@fixitsticks.com 872.802.3110

About Fix It Sticks:  Fix It Sticks is a highly modular multi-tool system featuring a variety of specialty tools and torque limiters, along with standard 1/4″ bits, to keep your gear running at the range and in the field.  Unlike other multi-tools out there, which compromise function for portability, Fix It Sticks uses a T-handle concept to give you the best of both worlds: shop level function, paired with light weight and portability.


Posted in Knives and Tools | Tagged , | Comments Off on New Compact Pistol Kit from Fix It Sticks

P229 PRO-CUT Slides Now Available

For the First Time, PRO-CUT Slides Are Now Available for SIG SAUER P229 Pistols

The new PRO-CUT slides for P229 9mm pistols feature stylized relief cuts and XRAY3 Day/Night Sights and are optic-ready with a removable sight plate making them compatible with the ROMEO1Pro Red Dot Sight.

BUY NOW

ALSO AVAILABLE

P229 LEGION RXP Slide

Enhance your target acquisition by converting your P229 with this LEGION slide complete with a ROMEO1Pro-mounted optic featuring suppressor height XRAY3 night sights.

Lyndsay W. Verified Buyer

★★★★★

“WORKS PERFECTLY…GREAT UPGRADE”

BUY NOW

P226 LEGION RXP Slide

Enhance your target acquisition by converting your P226 with this LEGION slide complete with a ROMEO1Pro-mounted optic featuring suppressor height XRAY3 night sights.

John C. Verified Buyer

★★★★★

“BEAUTIFUL…SPOT ON ACCURACY”

BUY NOW

P229 Small Parts Shopper

Intuitively navigate multiple levels for upper or lower components. Zoom in and out to narrow your purchasing options and add to cart without leaving the shopping experience.

SHOP THE P229 SMALL PARTS SHOPPER

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Accessories, pistols | Tagged , , | Comments Off on P229 PRO-CUT Slides Now Available