There’s no greater job or mission in life than motherhood. You’re overworked and at times even unappreciated, but the impact you have in life cannot be overstated.
Happy Mother’s Day !
There’s no greater job or mission in life than motherhood. You’re overworked and at times even unappreciated, but the impact you have in life cannot be overstated.
Happy Mother’s Day !
With the expanding role of the UAV and SUAV on the battlefield, it’s essential that the defense sector deliver configurable intrusion detection systems effective against land, sea and air threats. To that end ANDRUIL introduced the SENTRY system. Unique to SENTRY is the ability to be configured for all applications and theaters of operations. Sentry uses artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt and a variety of radars and sensors, Sentry can autonomously identify, detect and track objects of interest to bring increased security to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.
The configuration depicted in the picture above is the company’s Long Range Sentry Tower. It uses a total of four continuous wave radar modules operating in the Ka frequency range. This array provides simultaneous 360-degree detection with sufficient resolution to detect and track Group 1 through Group 3 UAVs.
The SENTRY system has a range of 2–4km for Group 1 and Group 2 threats and 15 km for Group 3 and larger threats. It’s powered via solar panels and when fully configured weighs approximately 1500 lbs..
Overview of the ANDURIL SENTRY System
Overview of the Counter-UAS function
ZULU6 HDX Binoculars: Stability Equals Clarity
Experience a new era of glassing systems with the ZULU6 HDX binoculars from SIG SAUER Electro-Optics
ZULU6 HDX binoculars create a groundbreaking new paradigm in hand-held glassing solutions, utilizing SIG SAUER’S proprietary OIS™ Optical Image Stabilization technology and HDX lenses that deliver a full-resolution image without a tripod.
Now with two modes of optical image stabilization that enhance the user’s ability to find wild game and targets while glassing off hand. The Optical Image Stabilization in both modes electronically cancels out shaking and vibration.
★ Scan Mode: Designed specifically for scanning and griding terrain.
★ Target Mode: Designed specifically for locking in on wild game & targets, increasing stability up to 50% allowing you to successfully identify targets once located in Scan mode.
Updated with SIG SAUER’S HDX glass lenses, the ZULU6 HDX produces enhanced light transmission, resolution, and definition for unparalleled optical clarity and resolution.
Available in 10x, 12x, 16x and 20x magnification.
VIDEO: ZULU6 HDX Product Features
SIG SAUER’s Patrick Hanley discusses the features and benefits of the ZULU6 HDX Image-Stabilized Binoculars.

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING
SIG SAUER Inc.,
72 Pease Boulevard, Newington, NH 03801
(603) 610-3000
sigsauer.com
Hornady Security® RAPiD® Safe Ready Vault™ Series Feature Big-Time Security for Small Spaces – Now Available with WiFi

![]()

Grand Island, NE (May 11, 2023) – Secure firearm storage is essential for responsible gun owners. The RAPiD® Safe Ready Vault Series is loaded with modern technology and proven security features to keep firearms secure while accessible. Hornady Security® RAPiD Safes offer quick, dependable firearm access using patented RFID technology while providing unmatched security from unauthorized users.
The RAPiD Safe Ready Vault series includes the Ready Vault and the Compact Ready Vault. The bigger Ready Vault accommodates up to six long guns and fourteen handguns. The Compact Ready Vault model, the smaller of the two in the series, is sized for storing two pistols and up to three shotguns or rifles.
RAPiD Safe Ready Vaults use patented RFID lock-opening technology. Swiping an RFID-equipped wristband, key fob, or decal over the safe’s sensor instantly opens the vault door. A programmable digital keypad and mechanical key offer additional entry methods. An AC-powered lock with battery backup provides 24/7 protection and rapid access. Programming RFID locks add the convenience of opening multiple safes with the same tags.
The new RAPiD Safe Ready Vault with WiFi wirelessly sends entry notifications through the Hornady app to a phone or other portable device. This feature alerts owners to critical information about authorized (and unauthorized) vault entries.
The safe’s internal SQUARE-LOK™ walls create a customizable organizing system that allows the included gun racks and other SQUARE-LOK™ accessories to be mounted in numerous configurations to maximize storage. Add-on accessories compatible with SQUARE-LOK™ include Hornady Security LED lights, magnetic hooks, hygrometers, and dehumidifiers. A padded neoprene floor mat prevents slipping, allowing guns to be stored upright, while the coated gun racks keep long gun barrels and pistols spaced apart, preventing damage in storage.
Ready Vaults use heavy-duty steel construction and five hardened locking lugs engineered to withstand a barrage of attacks, including prying, dropping, picking, sawing, and targeted hinge attacks. Ready Vaults exceed ASTM international safety standards for security. Pre-drilled mounting holes allow additional security for mounting a heavy household object.
Hornady Security specializes in innovative firearms security storage solutions like RAPiD Safe Ready Vaults. The Ready Vault Series is ideal for the homeowner with a few pistols and long guns or someone who needs a secondary safe.
![]()

![]()
![]()
RAPiD® Safe Ready Vault™ w/ WiFi Features:
RAPiD® Safe Compact Ready Vault™ w/ WiFi Specifications:
RAPiD® Safe Ready Vault™ w/ WiFi Specifications:

![]()
Founded in 1949, Hornady® Manufacturing Company is a family-owned business headquartered in Grand Island, Nebraska. Proudly manufacturing products that are made in the USA, Hornady® Manufacturing is a world leader in bullet, ammunition, reloading tool, accessory and security product design and manufacturing.![]()
For more information, please visit WWW.HORNADYSECURITY.COM

NOW AVAILABLE IN 9MM
For those that demand a no-nonsense approach to their defensive grade pistol, the new Operator® 1911 in 9mm stands ready to deliver. Crafted on the solid foundation of a forged frame, slide and barrel, the Operator 1911 builds on the century-plus of service behind the gun and adds the benefit of the ever-popular 9mm round. Tactical Rack rear/tritium front sights, G10 grips, ambi safety, two 9-round magazines with bumper pads, forward cocking serrations, and more combine to make the Operator 1911 from Springfield Armory a must-have tool for self-defense.

1911 Operator® 9mm
MFG# PO9229 / UPC# 706397944025
FIRST LOOK: SPRINGFIELD ARMORY 9MM 1911 OPERATOR
It has been said the 1911 is the most perfectly designed pistol ever made. If you might question that, just consider the fact that today in the year 2023 people still talk about the legendary trigger, ergonomics and feel of a 1911. By my quick count, that’s more than 110 years. With that in mind, it’s almost crazy how popular they still currently are. Looks like John Moses Browning knew what he was doing.

Springfield Armory, 650 Weber Drive, Geneseo, IL 61254, USA, 800-680-6866
![]()
Tasmanian Tiger® Introduces TT Multipurpose Pouch VL and TT Multipurpose Pouch Set VL![]()
New products from Tasmanian Tiger® enhance storage and organization options for tactical operators, military, and law enforcement.

Knoxville, Tenn. (May 2023) – Tasmanian Tiger®, a tactical nylon line of products distributed exclusively for the US market by Proforce Equipment, Inc., is proud to introduce its TT Multipurpose Pouch VL and TT Multipurpose Pouch Set VL. Designed to offer enhanced storage and organization capabilities for tactical operators, military, and law enforcement personnel, these products are perfect for use in the field.
The TT Multipurpose Pouch VL is a sturdy equipment bag with a 6-liter volume and a handle. It is designed with a width suitable for many 30-liter backpacks, and it features a main compartment with a two-way zipper, a zip compartment on the front, and a hook & loop patch for color-marked and writable strips. The pouch can be attached to modular backpacks using the large, coverable hook & loop areas on the outside. The interior of the pouch features mesh pockets, loops, and an organizer, making it easy to store and find essential items. The pouch also includes elastic loops, a daisy chain on the front, and a blind hook & loop fastening. Watch the product video here: https://youtu.be/wWZnFuxtPP0.
The TT Multipurpose Pouch VL weighs 7.23 oz./205g. and measures 7.08H x 11.02W x 3.54D/18H x 28W x 9D cm. and is made from 420 HD Nylon. It is available in Black, Olive, and Coyote for an MSRP of $44.95.
In addition to the TT Multipurpose Pouch VL, Tasmanian Tiger has also introduced the TT Multipurpose Pouch Set VL. This set includes two robust bags designed for attachment to hook & loop fleece surfaces. The bags have an easy-view lid made of mesh material and hook & loop strips on the back for easy mounting on hook & loop surfaces or in modular TT backpacks. The TT Multipurpose Pouch Set VL consists of two bags with dimensions of 7×5.3×3.14in / 18×13.5x 8cm and 7×10.26×3.93in / 18x26x10 cm, respectively. The set also includes fixation loops, an inside daisy chain, and hook & loop strips that can be labeled.
The TT Multipurpose Pouch Set VL weighs 6.56 oz./185g. and is made from T-Square Rip FD. It is available in Black, Olive, and Coyote for an MSRP of $44.95.
Click to see the 2023 Tasmanian Tiger New Items digital catalog here or the Vol. 3 Product digital catalog here. Find a local dealer here for any of the exciting Tasmanian Tiger products.
All sales inquiries can be directed to tt@tasmaniantigerusa.com.

About Tasmanian Tiger®:![]()
Tasmanian Tiger®, a division of Tatonka GmbH, is an international brand founded in 1999 to provide user-design-driven nylon products to elite warfighters and law enforcement in Europe and Asia. From prototype to production, all products are manufactured in the company’s own facilities, thus ensuring a consistently high level of quality throughout the production processes. All products are quality checked before leaving the facility and checked regularly by independent international test centers.
USA: www.tasmaniantigerusa.com
Worldwide: https://www.tasmaniantiger.info/en/.

NEW LW7 SHORT ACTION SHIPPING NOW!
WEIGHING UNDER 20OZ IN AN ALL STEEL CONSTRUCTION
MSRP $1299
Falkor Defense
2902 Highway 93 North
Kalispell, Mt 59901


WOOX NOW SHIPPING FURIOSA ULTRA AND TITANO PRECISION COMPETITION STOCKS
(HICKORY, NORTH CAROLINA, May 11, 2023) – WOOX is pleased to announce availability of its highly anticipated Furiosa Ultra and Titano, featuring exceptional design of American walnut and purposefully built to meet the needs of PRS and F-Class shooters.
“Furiosa Ultra and Titano are the result of requests from, and conversations with, competitive shooters who love the design and feel of WOOX stocks but needed features unique to these style of matches,” said Danilo Minelli, CEO of WOOX. “While designed with PRS and F-Class in mind, long distance shooters of every type can benefit from these designs and their unique attributes.”
FURIOSA ULTRA
An all-new chassis that is 3-inches longer than the original Furiosa and features the new Suspense™ adjustable stabilizer system. Integrated into the fore end, Suspense enables the arrangement of six 1-ounce weights for achieving ideal rifle balance. Every chassis includes two weights, with additional weights sold separately.
Also new are 10” extended length M-LOK™ rails, a wider barrel channel that accommodates barrels up to 1.25” in diameter, and an integrated, full-length Arca rail.
The shoulder stock retains the cheek and length-of-pull adjustability of the original while adding a new vertical grip, thumb rest and integrated bag rider.
The Furiosa Ultra chassis is milled from aircraft-grade aluminum for maximum strength and the stocks are crafted from American Walnut for vibration suppression and durability.
Furiosa Ultra accepts Remington® 700 short action footprinted actions including clones and custom actions and is available for $1399.99 MSRP.
TITANO
WOOX enters the benchrest and F-Class shooting arena with the Titano, featuring the company’s new Suspense™ adjustable stabilizer system.
The predominant fore end with a flat, 3-inch wide floor ensures a steady shot, and the wide barrel channel accommodates large calibers with barrels up to 1.25” in diameter. The shoulder stocks sports a new vertical grip, thumb rest, adjustable cheek riser and length-of-pull, plus an integrated bag rider.
The Titano chassis is milled from aircraft-grade aluminum for maximum strength and the stocks are crafted from American Walnut.
Titano is compatible with Remington® 700 short action rifles including clones with an MSRP of $999.00.
WOOX is an outdoor gear company headquartered in Hickory, North Carolina with a mission of manufacturing premium products for outdoor enthusiasts. Our brand is the wild child of Minelli Group, an Italian company started in 1937 and sought after the world over for expertise in craftsmanship and design. WOOX products are designed to perform using raw, natural material; superior technology throughout the supply chain and manufacturing; and materials sourced in a responsible, sustainable manner for the good of the planet. For dealer inquiries and to learn more about WOOX, visit wooxstore.com.
WOOX LLC 1269 19th Street Lane NW Hickory, North Carolina 28601

![]()
![]()

The Kestrel® Heat Stress Flag Kit
As the temperature rises, your athletes are at risk of heat-related illnesses such as heat stroke and dehydration. That’s why we’re excited to introduce the Kestrel® Heat Stress Flag Kit – the latest innovation in heat safety technology.
Designed with the needs of athletics trainers in mind, the Kestrel Heat Stress Flag Kit helps you quickly and easily monitor heat stress conditions across your playing fields and the entire school campus. With just a quick glance at the color-coded flags, you can inform coaches and athletes of the appropriate safety measures to take in response to the current WBGT zone.

But don’t just take our word for it – Christina Emrich, Head Athletic Trainer at Red Bank Regional High School in Little Silver, NJ, says that the Kestrel Heat Stress Flag Kit is a game-changer for her team.
Don’t wait until it’s too late – order your Kestrel Heat Stress Flag Kit today and keep your athletes safe all season long.
21 Creek Circle , Boothwyn, PA 19061

The Teledyne FLIR Black Hornet Nano Drone is currently being used globally by numerous military organizations. In 2022, the UK and Norway shipped $9 million worth of Teledyne FLIR Black Hornet micro drones to Ukraine. The Black Hornet provides the dismounted soldier with enhanced ISR and situational awareness in a package that is nearly silent with a loiter time of 25 minutes.
Teledyne FLIR Defense has teamed with Primordial Labs to develop and implement voice command control of the Black Hornet. The innovative technology eliminates the need to use remote controllers thus simplifying deployment and control of the drone in the field. The technology can also be integrated into a COP application.
A variety of features are fully supported; for example, defining multiple way points.

Lynred breaks ground on new €85M industrial site for infrared technologies
Named Campus, Lynred’s new state-of-the-art industrial facility will meet growing market demand for advanced infrared technologies, notably for automotive sector, whilst bolstering French industrial sovereignty in field
Company’s production capacity set to undergo 50% increase by 2025; 100% by 2030
Grenoble, France, May 10, 2023 – Lynred, a leading global provider of high-quality infrared detectors for the aerospace, defense and commercial markets, today announces breaking ground on its new €85 million ($93.7M) industrial site to produce state-of-the-art infrared technologies. This is the biggest construction investment that the company has undertaken since it began manufacturing in 1986.
The project is financed by loans from the CIC bank and Bpifrance.
Lynred will double its current cleanroom footprint, totaling 8,200 m2 (88,264 ft2), primarily to meet two strategic objectives:
Obtain an optimal cleanroom cleanliness classification for its new high-performance products (hybrid detectors)
Increase the production capacity for its more compact industrial products (bolometers) used in multiple fields, including the automotive industry
This substantial investment will consolidate Lynred’s positioning as European market leader in infrared detection. It enables the company to play a key role within the European defense industrial and technological base, innately woven into strengthening French and European forces, for whom infrared detection is hugely important. With this, Lynred takes a step up in responding to the French government’s call to reorient European industry towards a ‘rearmament economy’ (FR).
To mark the ground breaking on May 10, Jean-François Delepau, chairman of Lynred, planted a holm oak tree.
“I am delighted to see our state-of-the-art industrial site come to life, consolidating our position as the second largest infrared detector manufacturer in the world. This will enable us to respond to growing market demand for next-generation infrared technologies, including in the automotive sector. It will allow us to contribute to bolstering France’s industrial sovereignty and, more generally, to improve our overall industrial performance. Above all, I wish to thank the Lynred teams involved in this major undertaking, as well as all our partners who have supported us, in particular our shareholders, Thales and Safran. Lynred is embarking on a new strategic pathway, both in terms of technology and dynamic growth,” said Mr Delepau.
The buildings are due for completion in the first trimester of 2025 and the site will be fully operational by the following October. This state-of-the-art industrial facility will comprise 8,200 m2 (88,264 ft2) of interconnected cleanrooms (twice the current surface area), 3,400 m2 (36,600ft2) of laboratories, a 2,300 m2 (24,756 ft2) logistics area, and a tertiary and technical area measuring 10,800 m2 (11,625 ft2).
Lynred is looking to increase its production capacity by 50% by 2025, in particular for its bolometer products, with a view to doubling capacity by 2030.
With these new cleanrooms the company will house all of its French production lines in a single location. This will enable synergies amongst core competencies and optimize production flows.
The new buildings will be located on the current Lynred site in Veurey-Voroize, situated within the Grenoble area. They have been designed to ensure optimized energy management and environmental performance: even with 13,600 m2 (146,400 ft2) under construction, the volume of permeable surface will increase. The company will decrease its carbon footprint by 33% and will install 1,800 m2 (19,375 ft2) of solar panels. Moreover, the site will accommodate an additional 320 trees and more than 100 charging stations for electric vehicles (cars and bicycles) will be put in place, with more cycle parking added.
About Lynred
Lynred and its subsidiaries, Lynred USA and Lynred Asia-Pacific, are global leaders in designing and manufacturing high quality infrared technologies for aerospace, defense and commercial markets. It has a vast portfolio of infrared detectors that covers the entire electromagnetic spectrum from near to very far infrared. The Group’s products are at the center of multiple military programs and applications. Its IR detectors are the key component of many top brands in commercial thermal imaging equipment sold across Europe, Asia and North America. Lynred is the leading European manufacturer for IR detectors deployed in space.
www.lynred.com
Sleep Soundly – SnapSafe® Under Bed Safes Protect Firearms and Valuables

![]()

![]()
![]()

![]()
Grand Island, NE (May 10, 2023) – Some homeowners prefer a shotgun or carbine as a home defense weapon. These long guns provide extra peace of mind at night but require bigger storage containers than pistols. SnapSafe offers the solution. Under bed safes, keep larger firearms, ammunition, and other valuables secure, allowing quick and convenient slide-out access when needed.
Three sizes of SnapSafe Under Bed Safes offer the right-sized secure storage and feature a slide-out draw for easy access to the safe’s contents. All models have a slim profile for mounting below a bed’s frame. Large and XXL models are wide enough to hold most defense shotguns and carbine rifles. The medium safe is best suited to pistols or other valuables like jewelry, documents, data backup hard drives, and extra ammunition.
The digital lock on all Under Bed Safes uses a user-programmable three-to-eight-digit access code. Safes open with a push-button keypad, or key backup. The ability to set multiple safes with the same code means there’s only one number to remember; this feature ensures quick access in a stressful situation!
The Under Bed Safes’ pry-resistant door and heavy-duty 14-gauge steel construction blocks unauthorized users. For added security and to prevent safe theft, all Under Bed Safes come pre-drilled for permanent installation or anchored with a rugged cable – opening the possibility of mounting an Under Bed safe inside a vehicle.
Under Bed Safe Features:
· Available in three sizes: medium, large, XXL
· Slide-out drawer accommodates firearms, jewelry, documents, and more
· Digital lock with key backup can be programmed with a 3 to 8-digit access code
· Pry-resistant door keeps children and unauthorized users from gaining access
· 14-gauge steel construction, with pre-drilled holes for permanent installation
· Robust 5-foot cable provides added security when anchored to a stationary object
Under Bed Safe Medium Specifications:
· Exterior: 26″W x 5″H x 20″D
· Weight: 51 lbs
· MSRP: $481.99
Under Bed Safe Large Specifications:
· Exterior: 40″W x 6″H x 22″D
· Weight: 105 lbs
· MSRP: $596.99
Under Bed Safe XXL Specifications:
· Exterior: 48″W x 7”H x 24”D
· Weight: 150 lbs
· MSRP: $665.99

![]()
SnapSafe® is owned by Hornady® Manufacturing, a family-owned, third-generation business that has been designing, machining and producing bullets, ammunition, reloading products and security products since 1949. To learn more about Hornady® or SnapSafe®, visit their websites: hornady.com and snapsafe.com.![]()
For more information, please visit www.snapsafe.com
HOME HOLSTERS AMMO CARRIERS BELTS FAQ
Galco Holsters
2019 W Quail Ave, Phoenix, United States, 85027

SCI Technologies is a SANMINA company. I am familiar with SANMINA, who is a global electronics manufacturer, with over $7 Billion in revenues; headquartered in San Jose, CA. With drones playing an increasingly important role on the battlefield, countermeasures development is a logical evolution. SCI Technologies approach is to not attack a hostile drone via its control link; instead, they equip their drones to detect, track and physically capture the hostile drone by deploying a net. It’s a unique approach that’s been proven to be effective. SCI Technologies is also developing additional capabilities to include ordinance delivery capabilities.
AeroGuard is SCI Technology’s fully autonomous, rapid-response Drone Interdiction System that captures and disposes of any Unmanned Aerial Vehicle (UAV) threat described under FAA Part 107 regulations. FAA Part 107 regulates SUAV from .5 lbs. to 55 lbs., this is where you’ll find your DJI sized drones.
Raytheon Technologies introduces OXYJUMP™ NG oxygen supply system for military parachutists
Advanced technology provides advantages for special operations missions – enabling longer glide duration on higher altitude jumps, maximizing oxygen use and reducing system weight
TAMPA, FL (MAY 9, 2023) – Collins Aerospace, a Raytheon Technologies business (NYSE: RTX), introduced its OXYJUMP™ NG oxygen supply system for use in high altitude jumps by parachutists. The OXYJUMP NG system’s breakthrough technology enhances mission capabilities with a longer gliding distance, improves jumper safety, is easy to use and contains significant size and weight advantages over legacy systems.
Existing oxygen supply systems are limited in extended high-altitude operations, restricting the effectiveness and reach of parachute missions.
Utilizing Collins’ oxygen pulse technology – already certified by one NATO country – the OXYJUMP NG system provides customers with a smaller, lighter weight solution which automatically adjusts oxygen levels to enable longer mission profiles.
“The OXYJUMP NG system gives allied armed forces the stealth, readiness and safety necessary to complete the most complex jumps on earth,” said Brad Haselhorst, vice president and general manager of Military, Safety and Cargo Systems at Collins Aerospace. “The OXYJUMP NG system not only keeps up with the evolving nature of combat jumps, but it’s ready for use today.”
Designed for comfort and ease of use, the OXYJUMP NG system operates automatically and includes an ergonomically designed mask to comfortably and securely fit against the face, giving users peace of mind and keeping them focused on their most critical tasks.
Collins Aerospace’s OXYJUMP NG system will be on display at SOF Week in Tampa, Florida at booth L910.
About Collins Aerospace
Collins Aerospace is a business of Raytheon Technologies, the largest aerospace and defense company in the world. Our global team of 73,000 employees dreams, designs and delivers smarter, more connected solutions for passenger safety and comfort, mission success, space exploration, and operational efficiency and sustainability. We make the most powerful concepts in aerospace a reality.
About Raytheon Technologies
Raytheon Technologies (NYSE: RTX) is the world’s largest aerospace and defense company. Our global team of 180,000 employees pushes the limits of known science and redefines how we connect and protect our world. We are advancing aviation, building smarter defense systems and creating innovations to take us deeper into space. The company, with 2022 sales of $67 billion, is headquartered in Arlington, Virginia.

AeroVironment Introduces VTOL Kit for Puma AE UAS
New vertical take-off and landing kit expands operational capabilities and streamlines constrained area operations
AeroVironment’s Puma VTOL Kit enables rooftop launch and landing
(Image: AeroVironment, Inc.)
ARLINGTON, Va., May 9, 2023 – AeroVironment, Inc. today introduced the Puma™ VTOL (vertical take-off and landing) kit, designed for plug-and-play integration into Puma 2 AE and Puma 3 AE small unmanned aircraft systems (SUAS). The optional Puma VTOL kit expands the operational capabilities of the combat-proven Puma system in complex terrain, as neither runway nor large open space are required for launch and recovery of the VTOL-equipped Puma, allowing operators to launch anywhere, anytime.
Leveraging AeroVironment’s Crysalis™ ground control solution, the added VTOL capability now allows a single Puma operator to execute missions and streamline operations through features like one-button launch and recovery.
“The modern battlefield offers varying types of complex terrain features, both natural and manmade, that can pose challenges to small unit operations and their use of unmanned aircraft. Our new Puma VTOL kit provides the operator with a wider range of launch and land capabilities, enhancing the unit’s mission while further safeguarding its personnel during these periods of transitional flight,” said Shane Hastings, AeroVironment’s vice president and product line general manager for small UAS. “The VTOL kit converts the Puma AE into a highly precise and agile ISR asset where a single operator can effortlessly launch the aircraft from a small space and attain mission-critical information of enemy forces in a timely manner and land on a desired rooftop or other small, targeted areas.”
Integration of the Puma VTOL kit requires minimal one-time modifications to the aircraft’s airframe by qualified personnel. Once modified, the plug-and-play Puma VTOL kit can be easily added or removed in the field within a couple of minutes, allowing operators to quickly transition between a fixed-wing and VTOL platform to suit varying mission needs with a single aircraft.
Available as an add-on option for new Puma 3 AE system orders and as a retrofit kit for already fielded Puma 2 AE and Puma 3 AE aircraft, both fielded and new aircraft can take advantage of this VTOL capability. To learn more about the new operational capabilities of Puma AE and Puma VTOL kit, visit www.avinc.com/pumaae.
ABOUT AEROVIRONMENT, INC.
AeroVironment (NASDAQ: AVAV) provides technology solutions at the intersection of robotics, sensors, software analytics and connectivity that deliver more actionable intelligence so you can proceed with certainty. Headquartered in Virginia, AeroVironment is a global leader in intelligent, multi-domain robotic systems and serves defense, government and commercial customers. For more information, visit www.avinc.com.
Liemke Introduces German-Made Luchs-1 and Luchs-2 Thermal Optics
![]()
Liemke Introduces German-Made Luchs-1 and Luchs-2 Thermal Optics
San Antonio, Texas (May 9, 2023) – Liemke, a leader in high-definition thermal imaging for hunting, is pleased to introduce the premium Luchs line of thermal optics. Made in Wetzlar, Germany, the Liemke Luchs (or Lynx as translated in English) incorporates the latest in thermal technology in these versatile devices that can be clipped onto any daytime riflescope or used as a handheld monocular.
Fast and quiet with a startup time of only five seconds for both Luchs models, and a standby mode for immediate activation, the Luchs-1 has a 35mm lens with heat signature detection range of up to 1,750 meters while the Luchs-2 has a 50mm lens with heat detection up to 2,500 meters.
Luchs thermals have a whisper-quiet calibration procedure with a rapid refresh rate of 50 Hz and are easy and intuitive to operate. Both models feature a 1024×768 OLED color display and a 640×512 12 µm VOx sensor for high contrast and detailed images. The Luchs-1 delivers a large field of view of 22 meters at 100 meters and an image that completely fills within the daytime riflescope at 2x magnification. The Luchs-2 has a field of view of 15.4 meters at 100 meters. Two image modes provide optimal detail rendition in varying weather conditions and there are five color modes, including an Extra Dark mode setting for glare-free images at night.
Easy and intuitive to operate, the Luchs thermal units have internal memory of 32 GB and a Wi-Fi function for live streaming via an app. Users can capture photos and videos of their hunt on the internal memory even while streaming live, and these can be transferred later via USB-C port. The built-in rechargeable battery has a run time of up to 9 hours and the three-position switch – On/Standby/Off – can be used to extend battery life in the field.
“Liemke is the top thermal optics brand in Germany, and the new German-made Luchs line raises the bar even higher when it comes to quality and performance,” said Jason Evans, CEO Blaser Group USA. “American hunters will recognize and appreciate the premium Made in Germany construction, advanced thermal technology, and high-definition performance the Luchs thermal optics deliver. Aptly named after the lynx, the Luchs-1 and 2 models deliver outstanding thermal night vision for hunters.”
Settings are easily adjusted on the Luchs units, and the hunter’s preference is saved when the device is turned off and available every time the device is restarted. The tough, shock-resistant aluminum housing is rain and dust protected in accordance with IP67, and the objective lens is protected by a scratch-resistant Diamond Like Carbon (DLC) coating for extra protection in the field. The Luchs-1 weighs 20.5 ounces and Luchs-2 weighs 22.4 ounces.![]()
For more information, visit LUCHS-1 (liemke.com).
MSRP:
Luchs-1 $5,554.00
Luchs-2 $6110.00
About Liemke Thermal Optics
Headquartered in Bielefeld, Germany, Liemke is the dominant thermal imaging brand in Germany trusted for its optical quality, reliability, outstanding customer service, and unsurpassed price-performance ratio.
Liemke is at the forefront of thermal technology, and its optics are prized by hunters for their high-definition images with fast refresh rates and smooth viewing. For more information, visit: Liemke Shop
About Blaser Group
The Blaser Group is the official U.S. importer for iconic German firearms brands Blaser, Mauser and J.P. Sauer; English gunmaker John Rigby & Co.; Minox optics and Liemke Thermal Optics. Established in 2006, the company which is based in San Antonio, Texas works with distributors, wholesalers, and over 200 authorized Blaser Group dealers across all North American states, with this figure continually growing. Today the Blaser Group’s industry-leading product portfolio includes bolt-action, combination rifles and over-and-under shotguns designed specifically for game hunters and competitive target shooters. Its custom shop offers exclusive engravings, design work and custom finishing for bespoke guns. With recent innovations, Blaser Group has gone on to expand its product portfolio into cutting-edge optics and accessory lines. For more information about the company and product lines, visit: http://www.blaser-group.com.
NOW AVAILABLE: ROMEO4T-PRO Mil-Spec Red Dot Sight
The ROMEO4T-PRO offers the same high-end optical performance, quad-reticle, and legendary durability as the original ROMEO4T while adding key features requested by professionals. Illumination control moves to the top, providing easy access with either hand while staying clear of chest rigs and plate carriers when slung. A dedicated night vision override switch makes short work of drastic changes in lighting conditions and by combining MOTAC with a common CR2032 battery, the ROMEO4T-PRO is rated for 50,000 hours of runtime.
Available in Black and FDE.
Like its predecessor, the ROMEO4T-PRO is IPX8-rated for waterproof and fog proof performance and is tested to MIL-STD-810 to ensure reliable service.
VIDEO: ROMEO4T-PRO Product Features
SIG SAUER’s Patrick Hanley discusses the features and benefits of the ROMEO4T-PRO Mil-Spec Red Dot Sight.
DroneUp and Wonder Robotics Collaborate on Precision Technology to Enhance DroneUp’s Delivery Operation
Virginia Beach, VA – May 9, 2023 – DroneUp, a leading autonomous drone delivery provider, and Wonder Robotics, an Israeli startup for autonomous solutions for drones and eVTOLs, completed a successful initial operational evaluation on DroneUp’s drone platform to achieve a higher level of autonomy and safety. Wonder Robotics’s autonomy technology will allow DroneUp to continue growing operations while maintaining its commitment to safety.
For the evaluation, Wonder Robotics’ proprietary“WonderLand” solution was installed on DroneUp drones, enabling smart precision autonomous landing, accurate winch delivery, and an advanced contingency plan. In addition to the improvements to precision, the WonderLand technology will allow a single flight engineer to safely and autonomously oversee multiple drone deliveries simultaneously, a crucial aspect to scaling DroneUp’s operation.
“Our technology is a BVLOS scale operation enabler for scalable drone services allowing the service provider or mission manager to safely operate multiple drones per site,” said Idan Shimon, co-founder, and CEO of Wonder Robotics. “Wonder Robotics’ goal is to provide a reliable technology that will make drone services safe and economical and to help with future regulatory rules for scalable, safe drone delivery.”
Wonder Robotics’ WonderLand technology includes vertical awareness (Vertical Detect And Avoid) and robust precision landing, allowing drones to operate in scale while beyond visual line of sight (BVLOS) from an operator or visual observer. In urban environments, this includes obstacle avoidance systems so drones can navigate around common settings such as trees, buildings, cables, and more to safely deliver packages quickly.
“Commitment to safe operation is our top priority, and exploring cutting-edge technology like Wonderland is so important to stay on that course,” said John Vernon, CTO of DroneUp. “Not only does implementing this into our tech stack improve individual deliveries, but it also gives us a clearer path towards scaling our operation as drone delivery becomes more and more popular every year.”
DroneUp will be validating Wonder Robotics’ technology in several areas through more operational flight tests.
About DroneUp
DroneUp is a drone flight services provider with drone delivery and drone technology solutions focused on the future of drone services, providing intelligent access to airspace, automation innovation, streamlined process management, operational efficiency, and a commitment to safety.
For more information: https://www.droneup.com
Wonder Robotics is dedicated to facilitating the commercial use of drones at scale by enabling safe and autonomous flights. Its first product, WonderLand, allows vertical take-off and landing (VTOL) drones to land safely and autonomously on any unprepared and unattended site. Based in Israel with offices in the US, the company was founded by worldwide experts in drone, robotics, navigation, and 3D visual applications in the commercial and military markets.


Pink Pucks Are in Stock and Shipping
Kinnear, WY (May 9, 2023) — Bow Spider, the quickest and easiest bow retrieval system on the market, is pleased to announce that the popular pink Bow Spider puck is now in stock and shipping. Originally launched in April 2021 as a limited run, the pink puck quickly gained popularity. Unfortunately, it quickly sold out and due to supply chain issues, the company was unable to keep producing it. All issues have now been resolved and the pink is back in stock.
Adding the pink puck back to the line is a continued effort to fulfill customer requests. “We continually received orders and requests for the pink puck,” said David Merrill, president and owner. “We listen to our customers and want to make sure they are happy.”
Currently in-stock and shipping, the complete pink Bow Spider packing system retails for $89.95 and an individual receiver or 2-Pack of receivers retails for $34.99 and $59.95 respectively. The Bow Spider is also available in black, tan and green. Additional colors will be added to the lineup in the coming months. Be sure to check the website regularly at www.bowspider.com for the latest news.
The Bow Spider concept is simple and revolves around a lightweight, roundish bow holder that comes with a sturdy belt and long bolts, allowing for multiple ways to secure your bow. An aluminum arm attaches to the bow’s riser, and slides into a slot on the lightweight, injection-molded receiver, which can be worn on the included belt or attached via long bolts to other objects. The bow is held securely in place via a gravity-locking system yet slides out with minimal effort. You have to either pull it out or turn it upside down to get the bow out. Use the belt to attach your bow to your pack, hip, truck headrest, blind, or tree. Bow Spider can also be easily attached to a binocular harness or backpack. In fact, it can be mounted to any sturdy flat surface for secure and easy storage – even a wall.
To order your pink Bow Spider now Click Here. You will want to get your pink Bow Spider while you can. This is a limited run and won’t be around forever.
About Recreational Archery Development LLC (RAD, LLC):
Founded in 2019 and headquartered in Kinnear, WY, RAD, LLC is a leading designer and manufacturer of innovative products for the outdoor industry, including the Bow Spider brand of products. Bow Spider’s intuitive design makes bow retrieval fast and easy in any situation. The product is proudly made in the USA and gives one percent of all sales to conservation. The company also offers veterans a 15 percent discount on all products. (To take advantage of this offer, orders need to be called in directly to the company at 307-438-9290.) For additional information on RAD, LLC and the Bow Spider brand of products write to: RAD, LLC, PO Box 171, Kinnear, WY 82516; call 307-438-9290; email info@bowspider.com; visit www.bowspider.com.

![]()
Tasmanian Tiger® to Exhibit at Special Operations Medical Association (SOMA) 2023![]()
Tasmanian Tiger® will have its TT Medic Line on display, including new items, at SOMA 2023, held at the Raleigh Convention Center, in Raleigh, NC, May 15 – 19, 2023.

Knoxville, Tenn. (May 2023) – Tasmanian Tiger®, a tactical nylon line of products distributed exclusively for the US market by Proforce Equipment, Inc., is proud to announce its participation in the upcoming Special Operations Medical Association (SOMA) 2023 Conference. The event will take place from May 15 – 19, 2023, at the Raleigh Convention Center in Raleigh, NC.
During the conference, Tasmanian Tiger will showcase its innovative line of tactical nylon gear designed for field medics, including its latest additions to the TT Medic Line. These products are designed to meet the specific needs of medical professionals working in high-pressure environments, including military medics, first responders, and emergency medical technicians.
“We are excited to exhibit at SOMA 2023 and showcase our latest products from our TT Medic Line,” commented Richard Lewis, President and CEO of Proforce Equipment, Inc. “Our goal is to provide medical professionals with the highest quality gear and equipment so they can focus on saving lives and helping others.”
In addition to its TT Medic Line, Tasmanian Tiger will also have Eric Linder, founder and chairman of TEAM5 Medical Foundation, with them at the conference. TEAM5 is a non-profit organization that provides medical care and humanitarian aid to people in crisis around the world. Tasmanian Tiger is a Gold Sponsor of TEAM5.
The SOMA conference brings together medical professionals from around the world to share knowledge and expertise in the field of special operations medicine. It is an excellent opportunity for attendees to network, learn about the latest advances in medical technology, and see firsthand the products offered by companies like Tasmanian Tiger.
To learn more about the SOMA 2023 conference, visit https://specialoperationsmedicine.org/soma-2023/. To view the full TT Medic Line of products, visit https://tasmaniantigerusa.com/category.php?id=5.
Click to see the 2023 Tasmanian Tiger New Items digital catalog here or the Vol. 3 Product digital catalog here. Find a local dealer here for any of the exciting Tasmanian Tiger products.
All sales inquiries can be directed to tt@tasmaniantigerusa.com.


About Tasmanian Tiger®:![]()
Tasmanian Tiger®, a division of Tatonka GmbH, is an international brand founded in 1999 to provide user-design-driven nylon products to elite warfighters and law enforcement in Europe and Asia. From prototype to production, all products are manufactured in the company’s own facilities, thus ensuring a consistently high level of quality throughout the production processes. All products are quality checked before leaving the facility and checked regularly by independent international test centers.
USA: www.tasmaniantigerusa.com
Worldwide: https://www.tasmaniantiger.info/en/.
Find a Perfect Gift to Honor First Responders with Fisher Pen Company®
![]()

Boulder City, NV (May 9, 2023) – First responders may not always be visible when things are running smoothly. However, they are always around us and are an integral part of our communities as they help us when we are faced with emergencies. As we celebrate Public Service Recognition Week this year from May 7th to 13th, Fisher Pen Company® offers their First Responders Series to honor those in the fields and express appreciation for their service.
Fisher’s First Responders Collection presents an ultimate choice for service professionals who frequently work in some of the most unusual conditions. Each pen in this collection is equipped with a medium-point pressurized PR4 black ink cartridge. This cartridge provides its user with incredible reliability even underwater or in zero gravity, regardless of the angle. Additionally, the PR4 cartridge boasts smooth performance in extreme temperatures ranging from -30° F to 250° F. The single-hand activation by cap and the 5.27 in. open length make these pens versatile and convenient simultaneously.
The design of the First Responders Series pens makes them an attractive gift for any service professional. Based on the M4B Military Matte Black Cap-O-Matic Space Pen, all of these pens are marked with a printed line of six assorted colors reflective of six service fields: gold (dispatchers), blue (law enforcement), red (firefighters), green (conservation), white (EMS) and orange (search and rescue). Moreover, Fisher Space Pen has been donating a portion of proceeds from each pen to support the service professionals, making the First Responders Series pens even more significant. The recipients of this support include First Responders Children’s Foundation, C.O.P.S (Concerns of Police Survivors), injured firefighters and their families, National Park Foundation, NAEMT (National Association of Emergency Medical Technicians) Foundation and National Disaster Search Dog Foundation.
Personalization options such as engraving and gift-wrapping are available at an additional cost. At $30 with a lifetime guarantee, Fisher Space Pen First Responders Series would make a superb choice, an affordable and meaningful way to honor anyone in service fields.
First Responder Matte Black Cap-O-Matic Space Pen Series Features:

![]()
Fisher Pen Company is a 75-year-old American manufacturer of ballpoint pens, with the notable distinction of being the only ballpoint pen used on every crewed flight into space since Apollo 7 back in 1968. While pressurized technology made it possible for NASA’s astronauts to write in space, it also provided writing capabilities in all-weather, underwater, over oil and grease, and from -30 to +250 degrees Fahrenheit. These pens are the perfect tool for trade professionals, first responders, military, rugged outdoor enthusiasts, trekkers, backpackers, industrial manufacturers, underwater divers, and anyone who values a pen that doesn’t fail.![]()
For more information, please visit WWW.SPACEPEN.COM
![]()

Firearm Industry Surpasses $16 Billion in Pittman-Robertson Excise Tax Contributions for Conservation
May 9, 2023
![]()
![]()
![]()
WASHINGTON, D.C. — NSSF®, The Firearm Industry Trade Association, celebrated a milestone achievement after announcing firearm and ammunition manufacturers topped $16.1 billion in excise tax contributions to the Wildlife Restoration Trust Fund since its inception in 1937. When adjusted for inflation, the total is more than $25 billion. The latest Firearms and Ammunition Excise Tax (FAET) Collection report released by the Department of the Treasury, covering the 4th Quarter Calendar Year 2022, indicates that firearm and ammunition manufacturers contributed more than $235 million, the third-highest 4th calendar-quarter in history.
“The entire firearm and ammunition industry should celebrate this truly outstanding achievement and take pride in this announcement,” said NSSF President and CEO Joe Bartozzi. “The firearm and ammunition industry understands the conservation of wildlife and the habitats in which they thrive are invaluable. They are critical to future generations taking part in hunting and the recreational shooting sports traditions and learning about their vital importance. The Wildlife Restoration Trust Fund, funded significantly by taxes paid by firearm and ammunition manufacturers, is responsible for the restoration and recovery of America’s iconic game species across the country, including the Rocky Mountain elk, whitetail deer, pronghorn antelope, wild turkey and a variety of waterfowl. These contributions have also facilitated the remarkable recovery of the majestic American bald eagle, of which there are now more than 316,000 in the lower 48 states. The firearm and ammunition industry is filled with pride to achieve this landmark for conservation funding and the role our industry plays to ensure America’s wildlife is perpetuated for future generations.”
The astonishing total represents more than $1 billion contributed to conservation since announcing crossing the $15 billion contribution threshold just 12 months ago. It was less than one year before that remarkable achievement that NSSF announced Firearm and Ammunition Excise Tax contributions surpassed $14 billion.
The Wildlife Restoration Trust Fund, commonly known as the Pittman-Robertson fund, is funded by excise taxes paid by firearm and ammunition manufacturers on their products, as well as archery equipment manufacturers. The excise tax is set at 11 percent of the wholesale price for long guns and ammunition and 10 percent of the wholesale price for handguns. The excise tax, paid by manufacturers and importers, applies to all firearms produced or imported for commercial federal law enforcement sales, whether the purpose is for recreational shooting, hunting or personal defense. The tax is administered by the Alcohol and Tobacco Tax and Trade Bureau (TTB) of the Department of the Treasury, which turns the funds over to the U.S. Fish and Wildlife Service (USFWS).
USFWS deposits the Pittman-Robertson revenues into a special account called the Wildlife Restoration Trust Fund administered by the USFWS. These funds are made available to states and territories the year following their collection based on a statutory formula.
These 10 to 11 percent excise tax dollars collected since 1937 under the Pittman-Robertson Federal Aid in Wildlife Restoration Act are specifically designated to be used by state wildlife agencies for conservation and related purposes. Collectively, purchasers of firearms and ammunition, hunters and the industry are the greatest source of wildlife conservation funding.
About NSSF
NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, visit nssf.org.
National Shooting Sports Foundation | 11 Mile Hill Rd, Newtown, CT 06470
![]()
U.S. Patriot Bravery Tour Stops at West Point, New York![]()
U.S. Patriot, a GALLS® company, is on a 25 military base tour across the country this spring and summer, celebrating US Military Service Members for their bravery and service to our country. The Bravery Tour will stop at West Point on May 12th for another amazing celebration event.

Lexington, KY (May 2023) – U.S. Patriot, a GALLS® company, and one of the largest military suppliers of uniforms, boots, and gear, is currently on its 25 military base U.S. Patriot Bravery Tour. The tour honors former and current military members and their families with a special event at each stop along the 6,800-mile journey.
On May 12th the U.S. Patriot Tactical Bravery Tour team will be at the West Point base exchange, located at 1204 Stoney Lonesome Road, West Point, NY. The event will feature food, drinks, promos, giveaways, and a chance to win the 2023 Jeep® Wrangler Willys 4×4 the U.S. Patriot team is traveling in. The event is open to all former and current military members and their families.
“The purpose of this tour is to meet our customers face-to-face, get to know our troops, and bring their voice directly into how we serve them better for their tactical gear needs.,” Mike Fadden, CEO of U.S. Patriot, said. “There is no better way to honor the bravery and sacrifice of the men and women who serve our country than to meet them in person, celebrate their stories and create a fun and memorable event they can enjoy with their families.”
The tour will be interactive, and the military service members will be encouraged to leave their unit’s memorabilia on the Jeep, making it one-of-its-kind by the end of the tour. At the conclusion of the tour, the Jeep will be given away through a sweepstake random drawing to one lucky winner. All active-duty military members, national guard members, reservists, military retirees, military veterans, and dependents of active-duty military members are eligible to enter the sweepstakes. No purchase is necessary.
Follow the U.S. Patriot Bravery Tour on its Facebook and Instagram.
For more information on U.S. Patriot Bravery Tour, visit: www.uspatriot.com.
About U.S. Patriot:![]()
For over 20 years, U.S. Patriot Tactical has been dedicated to serving American heroes at home and abroad. As the Nation’s largest military supplier, and now as part of the larger GALLS® family, we are committed to delivering the highest quality Apparel, Gear, and Footwear so you can focus on your mission. Whether you are a service member abroad, keeping us safe at home, or preparing to tackle life’s next adventure, the U.S. Patriot Team is prepared to deliver the service you deserve. With over 70 locations and lightning-fast international shipping through our online store, getting everything you need to ensure mission success has never been easier.

JFD SHOWCASES NEW TACTICAL DIVING VEHICLE TECHNOLOGY AT SOF WEEK 2023 AHEAD OF DELIVERY TO US PARTNER

• JFD prepares to deliver first production model of Shadow Seal to US partners Blue Tide Marine for training and demonstration purposes
• Shadow Seal combines proven technology with an adaptable platform ready to meet current and future SOF requirements
• Strengthening commitment to expanding US presence and subsea maritime capability
JFD – part of James Fisher and Sons plc – has launched its advanced four man tactical diving platform, Shadow Seal, during SOF Week 2023, ahead of delivery to United States partner Blue Tide Marine (BTM) for demonstration and training purposes.
Shadow Seal is an adaptable and extremely capable lightweight Tactical Diving Vehicle (TDV) able to transport a pilot, navigator and two passengers in surface, semi submerged and submerged mode with a range of 80nm.
Shadow Seal offers unparalleled underwater maneuverability to Special Operations Forces required to covertly cross the expanding offshore and littoral water gap. Adaptable to suit a variety of ISTAR and combat requirements, the platform provides sophisticated protection to complex, high value platforms and critical infrastructure.
A strategic partnership with BTM was announced in March 2022 as part of JFD’s commitment to expanding its US presence and subsea maritime capability. BTM subsequently purchased the first production model of Shadow Seal to provide local demonstration and training services – significant milestone in JFD’s journey towards a full turnkey US capability, inclusive of TDV provision and follow on support services throughout the product lifecycle.
Bob Pudney, President, Blue Tide Marine, comments:
“We are excited to bring this collaborative effort of JFD and BTM to the subsea sector and look forward to the delivery of the Shadow Seal. This multi-mission capable platform provides an opportunity to modernize the undersea capabilities of SOCOM, the US Navy and other agency partners with advanced mission focused technology, extended range and offers practical training and in service support.”
JFD has been working closely with the BTM team during production at JFD’s facility in Glasgow, UK, and final in-water trials, FATS (Factory Acceptance Trials) and HATS (Harbor Acceptance Trials) are currently underway prior to delivery to BTM in Fort Lauderdale, Florida in coming months. JFD will continue to offer support and training as the craft is delivered to the US.
Rob Hales, JFD Managing Director, says:
“The BTM partnership ensures that we can offer innovative solutions to modern day challenges; such as the current capability gap in littoral maneuver; with first class in-country demonstration and training. JFD is committed to further developing our in-country capabilities including through-life support services and this upcoming, important delivery milestone reflects a significant milestone in our mission to better serve the US and wider Americas undersea markets.”
Shadow Seal was first developed by Ortega Submersibles in The Netherlands which was acquired by JFD in 2019 and has since undergone further development and rigorous trials. JFD has combined 40 years’ experience within the subsea domain with proven technology; found within JFD’s Carrier Seal which is in operation with a number of the World’s Navies. Recent upgrades included in the latest Shadow Seal include expansion of available battery power enhancing range and endurance capacity of the craft.
JFD will be exhibiting alongside BTM at SOF Week 2023 on 8-11 May 2023, and will be displaying a prototype model of Shadow Seal (MK1D) on Stand 501 at the Tampa Convention Centre. SOF Week is an important opportunity for JFD US to promote its world-leading capabilities in the underseas sector, and our UK and US team will be on hand to discuss Shadow Seal and wider JFD Special Operations capabilities.
USSOCOM has been engaging with their defense sector business partners at an annual conference held in Tampa, home for USSCOM headquarters, for well over ten years. In 2021, USSOCOM expand the event to a broader convention for the entire SOF Community, akin to an “AUSA National Meeting” for the U.S. Army, and its maiden voyage will occur in May 2023. The exhibition hall will open on Tuesday, 9 May through Thursday 11 May. SOF Week 2024 is schedule for 6 May – 9 May
For 2023, Exhibit Hall statistics:
Exhibitors setting up outdoor exhibits
L3 Harris technical personnel setting things up
Flyer Defense to Unveil Never Before Seen “Hunter Killer” Configuration at new SOF Week 2023
Flyer 72-Heavy Duty with Hunter Killer Configuration Kit
TAMPA (April. 28, 2023) – Flyer Defense, the designer of the ultimate light tactical ground mobility vehicle will unveil its latest configuration of the Flyer 72-Heavy Duty (Flyer 72-HD) at the new SOF Week convention in Tampa.
Integrated with the exMHR/Hero-120 configuration kit, or “Hunter Killer,” the featured Flyer 72-HD boasts an on-the move self-contained strike capability, from onboard detection and tracking to pinpoint strike capability. This year, the Flyer 72-HD will be equipped with the exMHR Enhanced & Extended Multi-Mission Hemispheric Radar from Leonardo DRS and Hero-120 loitering munition system from Mistral and UVision.
Combined with the pinpoint strike capabilities of the Hero-120, the exMHR Doppler radar technology further transforms the armored Flyer platform, protecting its occupants from both long and short-range threats.
The “Hunter Killer” is the latest in a string of new Flyer configurations as the company continues to expand platform capabilities while maintaining a live production line.
Flyer Defense will make its home in Booth #1505 for the duration of the show. The Flyer 72-Utility variant will also be on display, equipped with the Hero-120 configuration kit in Mistral Group’s Booth 111 just outside of the convention center.
The Flyer® family of ground mobility vehicle platforms is the elite solution in the area of lightweight, all terrain wheeled tactical vehicles. With an impressive payload of more than 5,000 lbs. and a 1:1 payload-to-weight ratio, Flyer Defense vehicles are transportable both internally and externally with rotary and tilt wing aircraft. The Flyer® 72 is currently in production for the United Arab Emirates Armed Forces and in use as the USSOCOM Ground Mobility Vehicle 1.1. (GMV 1.1) solution and the U.S. Army A-GMV solution.
For interview requests, please contact Ms. Sefe Emokpae, Flyer Defense Marketing and Communications Manager at SefeE@flyerdefense.com or 310.946.9053.
About Flyer Defense
Flyer Defense, LLC was formed to provide mission-specialized, lightweight, high mobility, all- terrain tactical wheeled vehicles capable of internal transport in rotary and tilt wing aircraft. Flyer provides purpose-built vehicles and logistics support for U.S. Army, special operations forces and global allies. Always prioritizing the users and their missions, Flyer vehicles increase ground mobility, allow rapid deployment into contested areas, and enable military ground forces to move quickly for extended distances and over difficult terrain. The Flyer® family of successfully tested and certified vehicles are modular platforms, allowing rapid vehicle customization for immediate operation-relevant configuration.
To learn more about Flyer Defense, please visit www.flyerdefense.com.
CONTACT:
Sefe Emokpae
Driven to Exceed
L3Harris Showcases VAMPIRETM and WESCAM MXTM-8 Capabilities at SOF Week
VAMPIRE
L3Harris’ Vehicle-Agnostic Modular Palletized ISR Rocket Equipment (VAMPIRE) is a low-cost, vehicle agnostic, rapid weapon deployment solution that gives ground forces the ability to quickly and accurately engage targets. The Department of Defense announced VAMPIRE as part of security assistance package under the Ukraine Security Assistance Initiative in August 2022.
VAMPIRE also features the WESCAM MX-10 RSTA electro-optical/infrared (EO/IR) independent stabilized sighting system. The WESCAM MX-10 RSTA provides ISR overmatch and is ideal for reconnaissance, surveillance and target acquisition missions from amphibious, armored combat and reconnaissance vehicles.
WESCAM MX-8 EO/IR Sensor System
L3Harris’ fully digital, ultra-low-weight WESCAM MX-8 EO/IR system is integrated on Vanilla Unmanned’s UAS platform providing fully stabilized and high-performance imaging under demanding and dynamic conditions. The WESCAM MX-8 provides operators with superior situational awareness and tracking capabilities for ISR missions. VAMPIRE integrates WESCAM MX-10 RSTA.
Vanilla is an ultra-endurance unmanned aircraft system (UAS) capable of multi-day Intelligence, Surveillance and Reconnaissance (ISR) operations at tactical altitudes. It is field proven for long-term beyond visual ling of sight capability across a variety of challenging weather conditions within maritime, desert and arctic environments.
Counter-UAS technology such as L3Harris’ VAMPIRE provides highly-mobile tracking and designating technology to engage unmanned airborne targets.
WESCAM MX-10 RSTA WESCAM MX-8
WESCAM MX-8/Vanilla UAV
Vanilla Unmanned is an ultra-endurance UAS capable of multi-day and multi-sensor ISR coverage at tactical altitudes, integrated with L3Harris’ WESCAM MX-8 for advanced EO/IR imaging in dynamic conditions.
About L3Harris Technologies
L3Harris Technologies is a Trusted Disruptor for the global aerospace and defense industry. With customers’ mission-critical needs always in mind, our 46,000 employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains.
Step into paradise in the new FN Hawaiian Shirt! Made with breathable fabric and vibrant colors, this shirt will keep you cool and stylish during warm weather. Its unique design featuring your favorite FN firearms and gnomes makes it a must-have for any occasion or beach vacation. Get yours while supplies last at fnestore.com!
Questions?
Call us at (844) 897-0675 Mon-Fri from 8am-5pm CST or Email us at cs@fnestore.com
FN eStore | 5655 State Rd 93 | Eau Claire, WI 54701 | United States
![]()
Celebrate Spring with Big Horn Armory’s Sun Shine Sale![]()
Save over $200 on an AR500 rifle or pistol when purchased between May 8 – 14, 2023.

Cody, Wyo. (May 2023) – Big Horn Armory (BHA), makers of big-bore firearms, is offering 10 percent off, a savings of over $200, any new BHA AR500 semi-auto rifle or pistol purchased directly from the website between May 8 – 14, 2023. BHA is currently shipping the AR500 from stock and a service representative will contact you within 48 hours to discuss options.
The AR500 rifle is an AR rifle like no other. Chambered in 500 Auto Max, BHA’s groundbreaking AR500 Rifle is the most powerful AR firearm available. BHA was not content with the big bore cartridge offerings available in the AR platform, so the company made its own. The logical choice was something to match the power and versatility of BHA’s Model 89 Lever Action in 500 Smith & Wesson Magnum. The result was the development of the 500 Auto Max, a rimless 500 S&W Magnum to feed in a semi-automatic rifle.
BHA’s bold AR design and big bore 500 Auto Max cartridge put an unparalleled amount of power into a pleasant shooting, rapid-firing, versatile rifle. This combination of size, familiar manual-of-arms, available accessories, and energy on target make the AR500 Rifle ready to handle almost any situation. The AR500 is also available in an ATF-compliant pistol configuration: the AR500 semi-auto pistol.
The 500 Auto Max is a rimless 500 S&W Magnum that is easy to obtain or reload. A very versatile cartridge, it can be had in loaded ammunition with bullets ranging from 350grns to an amazing 600grns. The handloader can utilize over 55 different bullets ranging from 200grns to 700grns in almost any bullet type imaginable, including hard cast, jacket hollow points, monolithic solids, etc. This unprecedented range of bullet weight and design make the AR500 suitable for anything from prairie dogs to pachyderms to Peterbilt’s. Truck stopping power in a platform weighing less than 10 pounds. Factory ammunition for the 500 Auto Max is available through Buffalo Bore, Steinel Ammunition, Underwood Ammunition, and Defiant Munitions.
Whether it is packing 36,800 ft. lbs. of energy in a lever-action, or building the most powerful AR on the market, BHA’s goal is to give the customer the biggest bang for his or her buck.
For more on Big Horn Armory, visit www.bighornarmory.com


About Big Horn Armory:![]()
Big Horn Armory was founded in 2008 with the expressed intention of designing a Browning-type lever-action gun chambered in 500 Smith & Wesson Magnum. The Big Horn Armory Model 89, made in America, closely follows the work of John Browning with refinements courtesy of modern metallurgy and machining capabilities. The first rifles began shipping in September of 2012 and since then, BHA has added to their big bore lineup with a Model 90 Carbine in 460 S&W, the Model 90A in 454 Casull, the Model 90B in .45 Colt, the Model 89A in 500 Linebaugh and the Model 89B in .475 Linebaugh. In 2017, Big Horn Armory took a departure from its lever-action series and developed the AR500 Auto Max, the most powerful short-range, semi-auto based on an AR .308 platform.

MANUAL SAFETY MODEL
NOW AVAILABLE
The new Hellcat® Pro with manual safety combines the performance of a larger handgun with class-leading concealability and capacity, while also offering the benefit of an ambidextrous frame-mounted manual safety. It is compact pistol chambered in 9mm that offers 15+1 capacity in a smaller footprint than any other gun in its class. Optics-ready and equipped with a versatile accessory rail and hammer forged barrel, this exceptional everyday carry pistol delivers the perfect balance.
Hellcat® Pro w/ Manual Safety & Shield SMSc
MFG# HCP9379BOSPMSSMSC / UPC# 706397962753
Hellcat® Pro w/ Manual Safety
MFG# HCP9379BOSPMS / UPC# 706397955441
Hellcat® Pro w/ Manual Safety, Low Capacity
MFG# HCP9379BOSPMSLC / UPC# 706397968137

Springfield Armory, 650 Weber Drive, Geneseo, IL 61254, USA, 800-680-6866

Posters Due May 12
We invite high-quality professional posters that reflect the theme of Biodefense and Pandemic Preparedness in an Era of Persistent Conflict. Submit your poster here by the deadline of Friday, May 12, 2023.
Poster categories include:
Autonomy & Robotics
Advanced Protection
Decision Support
Artificial Intelligence & Machine Learning
Simulated Training Environment
For complete details on the poster submission process, visit NDIA.org/CBRN.
Nominations Open for NDIA CBRN Awards
2023 NDIA CBRN Awards – Call for Nominations Deadline – Friday, May 12, 2023.
The Honorary William C. Baugh CBRN Defense Excellence Award recognizes an individual who has made the greatest overall contribution to CBRN defense programs during their lifetime. Achievements for which this award will be considered may relate to any of the many components that make up this highly diverse, complex, vital commodity:
Research and development through the acquisition of capabilities needed by the warfighters and first responders
Identification of ever-growing threats
Innovation in training for the current or future fight and identifying readiness initiatives for business opportunities
The Joseph D. Wienand NDIA CBRN Division STEM Excellence Award is in recognition of the greatest overall STEM achievement and/or efforts of an individual that most significantly impacted CBRN defense programs. This award recognizes the individual who, in the judgment of the panel, has demonstrated outstanding accomplishment through their own personal innovation and creativity in the areas of STEM. Example areas include but are not limited to:
Scientific, technological, engineering, or mathematical improvement
Enhancement of a CBRN defense-related product, system, or process for the current year
The awards will be presented at the 2023 CBRN Defense Conference and Exhibition. We value this opportunity to showcase the great work that has been done in the CBRN community in the last year and look forward to recognizing all your achievements!
Exhibits and Sponsorships
Gain visibility and increase your brand exposure by becoming a conference exhibitor or sponsor! Join us and meet face-to-face with conference attendees and have the opportunity to re-connect with key clients and prospective partners.
Visit the exhibits website for more information or to secure your booth space today!
Interested in becoming a sponsor? Check out all of the sponsorship opportunities here. We are happy to create custom packages to fit your needs, don’t hesitate to reach out!
Featured Opportunity
Registration Sponsor $8,500 Exclusive
Two (2) complimentary full conference registrations
NEW! Sponsor logo displayed on attendee badges
Lanyards with sponsor logo distributed at in-person registration….
And More…
Exhibit or sponsor questions? Contact Abby Abdala at aabdala@NDIA.org.
![]()
Date
July 24 – 26, 2023
![]()
Location
Baltimore Convention Center
1 W Pratt Street
Baltimore, MD 21201
![]()
Contact
Krystal Heard
Associate Director, Meetings
(703)247-2558
kheard@NDIA.org
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
Featured COCOM
Register today and join us to hear from this year’s featured COCOM, USNORTHCOM and NORAD. Hear directly from senior leadership and learn more about their vision as they navigate current challenges while preparing for the future through global strategy development and modernization.

Col Derrick Franck, USAF
Chief, N&NC Experimentation and Strategic Analysis (J8)

Col Jason Golaboski, USAF
Chief, N&NC Science and Technology (J8)
Thursday Classified Session
On Thursday, May 25 (Conference Day 3), the 23rd Annual Science & Engineering Technology Conference will feature a classified session. This session is classified as Secret U.S. Level; you must be a U.S. Citizen holding a secret clearance or higher.
Please visit the Security Clearance Information page for more information on how to submit your clearance. All visit requests must be submitted no later than Thursday, May 18, 2023 – no exceptions.
Sponsorship Opportunities
FEATURED SPONSORSHIP
Registration and Lanyard | $6,000 | EXCLUSIVE
Benefits Include:
One (1) complimentary full conference registration
Sponsor logo on promotional signage at Registration
Sponsor logo and link on event website
And more!
If you would like to enhance your brand with a sponsorship or would like to customize a package, contact Jenica Seguine at jseguine@NDIA.org to explore options.
![]()
Dates
May 23 – 25, 2023
![]()
Location
The University of Texas at San Antonio: San Pedro 1
506 Dolorosa Street
San Antonio, TX 78204
![]()
Contact
Jenica Seguine
Meeting Planner
(703) 247-2561
jseguine@NDIA.org
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
HOME HOLSTERS AMMO CARRIERS BELTS FAQ
Galco Holsters
2019 W Quail Ave, Phoenix, United States, 85027
D1xTM makes the transition from vehicles to operators
San Diego, CA, May 8th, 2023 – Torrey Pines Logic Inc. (TPL), the leader in electro-optical devices for the military, announces that D1xTM Laser Detector, the Personal Laser Warning Detector, makes its transition from vehicles to operators.
Helping to keep our military safe when they are in theatre, D1xTM, a passive laser warning receiver, protects operators from snipers, UAVs and many other battlefield platforms.
D1X™ is a passive laser warning receiver. It is designed to detect, and coarsely locate laser emissions in the field, from laser pointing/illuminating devices and rangefinders. The device enhanced safety and survivability for today’s battlefield environment covering all classes of commercial and military laser devices.
D1X™ will alert its wearer of laser emissions in visible, nearIR and SWIR through selectable audible, visual, and tactile feedback. The device can also be connected to a management system or provide laser warning for a defensive aid platform via USB C port.
To protect operators from attacks, a sensor can be used and integrated into various battlefield solutions to enhance safety as well as mitigate friendly fire incidents be alerting the operator of incoming laser emissions. D1X™ has an extremely low false alarm rate with a typical response time of less than 50 milliseconds. The system can be used as worn front of back or attached to a helmet.
Dr. Leo Volfson, President, Torrey Pines Logic, commented:
“What could be more important than the safety of our military in theatre. The new Personal Laser Warning Detector, D1X™, will allow operators to feel safe when they are put in dangerous situations. We are delighted to be showcasing our technology at SOF Week and would be pleased to welcome SOF Week visitors to our booth”.
Please visit us at our booth #L76 at SOF Week 2023, which takes place at the Tampa Convention Centre in Tampa, FL from May 8-11, 2023 or visit our website: Home – Torrey Pines Logic (tplogic.com).
For further information, please contact:
Dr. Leo Volfson; President
Torrey Pines Logic, Inc.
Email: LBV@tplogic.com
Tel: +1 858.382.7200
About Torrey Pines Logic Inc.
TPL, Inc. is a leading developer of optical and electro-optical instruments specializing in detection, optical communications and imaging.
Athena AI and Tomahawk Robotics partnership strengthens with first US DoD export sale
Brisbane, Australia, May 8th, 2023 – Athena AI, the Australian AI enabled soldier decision support company, is pleased to announce its first export sale. The sale, led by Tomahawk Robotics, provides the US DoD with Tomahawk’s common controller for unmanned systems, augmented by Athena AI’s Mission Module.
Athena AI is a featured AI partner in Tomahawk Robotics’ Kinesis command and control software ecosystem. Kinesis gives you the freedom to control the robotic platform you need to get the job done – all from a single interface and while integrating with your TAK/ATAK teammates. Athena AI’s role in the partnership is to leverage networked robotic platforms to extend soldiers’ sensory perception. The Athena AI Mission Module monitors platform video feeds and autonomously detects mission critical information, such as threats or objects of interest. This reduces the cognitive load required for soldiers to take in their surroundings and enables faster, more robust tactical decisions.
This is just one of the ways Athena AI is looking to improve combat capability for Defense Forces. Ultimately, Athena exists to help allied nations drive efficiencies and deliver decision superiority at the tactical level, all whilst mitigating risk to personnel. Athena also has products in development to support accelerated, ethically sound targeting cycles, autonomous geospatial analysis, AI-enabled mission planning, and the synchronization and autonomous tasking of uncrewed air and ground platform effects.
Athena’s CEO Stephen Bornstein explained “Our MOU with Tomahawk has been ongoing for over 18 months, and we are pleased to now mature this into a fully integrated application available to Kinesis users. We thank both Tomahawk and the US DoD for their consideration in how we can support the RAS enabled warfighter”.
For further information, please contact:
Dylan Brown
Head of Operations
Email: dbrown@athenadefence.ai
Tel: +61 416 130 515
About Athena AI Athena AI is committed to realizing the RASAI enabled warfighter. Athena leverages Artificial Intelligence to handle and process information saturated environments and assists soldiers to exploit critical information for maximum effect. Athena AI uses state of the art Machine Learning and Artificial Intelligence to enhance situational awareness, geospatial analysis, mission planning, dynamic targeting, and other use cases. Athena’s products are a result of over 3 years of R&D, funded by Australian Defense Force capability grants. Athena also includes the Australian Defense Force’s ethical AI pragmatic tools, consideration for lethality systems, and forward planning for Article 36 reviews to support sensor to effector links.