SAF STATEMENT ON SUPREME COURT’S RAHIMI DECISION

SAF STATEMENT ON SUPREME COURT’S RAHIMI DECISION

21 Jun

BELLEVUE, WA – Today’s narrow Supreme Court decision in Rahimi failed to produce the damage the anti-gun crowd hoped for against Bruen. The Bruen decision remains intact and will continue to be an important building block necessary to continue winning firearms freedom one lawsuit at a time.

None of the justices in the Bruen majority cast aside the test rearticulated in that decision which controls how Second Amendment challenges are to be analyzed. Additionally, the justices declined to adopt the Government’s preferred time period of reconstruction as the controlling era for which historical analogues may be drawn upon.

Rahimi posed a difficult issue for the Court to resolve. And while the Court may have arrived at a conclusion that society believes to be best, it did so in a manner that poses some inconsistencies with what Bruen demands. To be clear, domestic violence is abhorrent and those who commit such acts should be prosecuted to the fullest extent of the law – for which a conviction would result in their disarmament through imprisonment.

As Justice Thomas wrote “the question before us is not whether Rahimi and others like him can be disarmed consistent with the Second Amendment. Instead, the question is whether the Government can strip the Second Amendment right of anyone subject to a protective order – even if he has never been accused or convicted of a crime.” Stripping an individual of their Second Amendment rights, when they have not been accused or convicted of a crime, is not consistent with what the Constitution protects.

The Court’s justification in upholding the law by cobbling together bits and pieces of historical laws to find a “historical analogue” may allow future courts to uphold various infringements on the Second Amendment by the same sort of manufacture.

While Rahimi himself is the focal point of this case, the unintended consequences of how the Court justified upholding 922(g)(8) may affect the Second Amendment rights of millions of Americans if the lower courts adopt a similar approach. This makes it all the more important the Court take any number of other Second Amendment cases at its door, to further clarify that the Second Amendment protects a pre-existing, fundamental individual right and how to appropriately conduct the analysis Bruen requires.

Posted in Constitution | Comments Off on SAF STATEMENT ON SUPREME COURT’S RAHIMI DECISION

Faster Form 4 Raffle with ASA: You Could Win a MCX-SPEAR LT Prize Pack

Enter for a Chance to Win a MCX-SPEAR LT, SLH Suppressor, TANGO-MSR Riflescope and More!

Since 2011, American Suppressors Association has helped three states legalize suppressor ownership, and 19 states legalize hunting with suppressors. They’ve actively lobbied in 35 U.S. states and territories, fought to ease restrictions on suppressors, testified in front of dozens of legislative bodies, hosted countless suppressor demonstrations for legislators, policymakers, media, and the public, and funded research proving the efficacy of suppressors.

Help ASA protect your right to own and use suppressors by buying a raffle ticket today. Your donations are the lifeblood that gives the ASA the resources to fight for your rights!

Enter the Faster Form 4 Raffle for a Chance to Win this Prize Pack:

★ MCX-SPEAR LT .300BLK 9″ SBR

★ SLH Suppressor

★ TANGO-MSR 1-6x24mm Riflescope

★ Both Tax Stamps Covered By Silencer Shop

★ $100 Cole-Tac Gift Card

ENTER THE FASTER FORM 4 RAFFLE NOW

LAST CHANCE: Enter for a Chance to Win the New M17X and a Prize Pack from High Speed Gear

This Sweepstakes Ends Today!

The Next Generation of M17 is here, delivering all the performance and reliability that made the M17 the choice of the U.S. Military, now outfitted with the most advanced features. This is your chance to win the M17X for yourself along with an amazing assortment of holsters and mag pouches from High Speed Gear.

One Grand Prize Winner Will Receive:

★ (1) SIG SAUER M17X pistol with installed ROMEO-M17 red dot sight

★ (1) BlackPoint Tactical Leather Wing Holster for M17X

★ (1) Comp-Tac International Holster for M17X

★ (2) HSGI Brown Pistol Tacos

★ (2) HSGI Brown Rifle Tacos

ENTER FOR A CHANCE TO WIN NOW

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Promotions | Tagged , , , , | Comments Off on Faster Form 4 Raffle with ASA: You Could Win a MCX-SPEAR LT Prize Pack

True Velocity, FN America Announce Global Manufacturing Partnership on Lightweight Medium Machine Gun

A Weapon We Need In Modern Warfare: LWMMG/MG-338 : r/modernwarfare

FN America’s machine gun manufacturing prowess bolsters True Velocity’s innovative weapon solution to bridge battlefield performance gap

GARLAND, Texas, June 18, 2024 (GLOBE NEWSWIRE) — Texas-based ammunition and weapon system manufacturer TV Ammo, Inc. (“True Velocity”) and FN America, LLC (“FN America”), a global leader in the development and manufacture of military small arms, have announced a strategic licensing and manufacturing partnership for the production of True Velocity’s .338 Norma Lightweight Medium Machine Gun for U.S. and Allied military units.

The partnership positions FN America as a primary manufacturer of True Velocity’s .338 Norma machine gun, a recoil-mitigated weapon system designed to provide warfighters with range and terminal performance similar to that of the century-old .50-caliber M2 machine gun in a lightweight, functional profile comparable to that of the ubiquitous M240 machine gun also manufactured by FN America.

“True Velocity’s .338 machine gun will change the battlefield for our warfighters. We are thrilled that FN will join with us so we can equip U.S. and Allied militaries with this combat advantage,” said True Velocity President and Chief Intellectual Property Officer Craig Etchegoyen. “It very quickly became clear that FN is a world-renowned, reliable, and respected manufacturer of innovative machine guns, and we’re excited for them to join our mission.”

A lightweight machine gun solution chambered for the .338 Norma cartridge has been a focal point of requirements emerging from the U.S. Department of Defense and Allied militaries in recent years. In March 2024, the United States Department of Defense selected True Velocity’s .338 Norma Lightweight Medium Machine Gun for continued evaluation in a military program aimed at fielding a weapon system that would bridge the performance gap between the .50-caliber M2 machine gun and the M240 machine gun chambered for 7.62x51mm NATO. The combination of True Velocity’s recoil-mitigated .338 Norma Lightweight Medium Machine Gun and its advanced, lightweight composite-cased ammunition provides a turn-key combat solution capable of enhanced controllability, maximized maneuverability, and extreme precision at extended range.

“FN America is extremely excited to partner with True Velocity on this effort to deliver the next medium machine gun to the U.S. military,” said Mark Cherpes, President and CEO for FN America, LLC. “Both companies share that drive and desire to innovate and deliver game-changing technology to the warfighter. This has produced a really great team environment on this effort.”

Incorporating proprietary “impulse-averaging recoil mitigation” technology, True Velocity’s .338 Norma machine gun delivers a 300-grain projectile with enhanced range and precision, while optimizing controllability and maintaining a profile similar to that of the M240 belt-fed machine gun, which is chambered for the smaller, less energetic 7.62x51mm cartridge.

“True Velocity’s lightweight medium machine gun submission is the product of more than a decade of continued innovation and rigorous evaluation,” said True Velocity Senior Executive Vice President of Sales Kevin Sims. “This weapon system delivers unprecedented tactical and operational capabilities to our American warfighters. The sooner we bring it to the battlefield, the better.”

For military sales inquiries, please contact True Velocity Executive Vice President of Sales and Business Development Kevin Sims at ksims@tvammo.com.

About True Velocity

True Velocity is an advanced technology manufacturing and licensing company based in Garland, Texas, with a current emphasis on composite ammunition, lightweight machine guns and suppressors. Founded in 2012, True Velocity has approximately 315 patents pending or issued surrounding its products, technology and manufacturing processes. True Velocity is focused on revolutionizing the ammunition and weapons industry through the introduction of its composite-cased ammunition, innovative weapons systems and advanced manufacturing technology. True Velocity products are manufactured in the U.S. in a state-of-the-art, 66,000-square-foot facility. The company’s proprietary composite cartridge is designed to provide significant logistical advantages over traditional brass-cased ammunition and give end users enhanced accuracy, repeatability, and reliability, all in a light-weight cartridge.

For more information, visit tvammo.com.

About FN America
FN America, LLC, is a U.S. subsidiary of FN Herstal, S.A., a global leader in the development and manufacture of high-quality, reliable firearms for military, law enforcement, and commercial customers worldwide.  Headquartered in McLean, VA, with manufacturing operations in Columbia, SC, FN America is passionately committed to providing its customers with a portfolio of products, training, and support services under the FN brand name that enhance their performance and safeguard their lives.

For more information, visit www.fnamerica.com.

Cautionary Note Regarding Forward-Looking Statements 

This communication contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements include, but are not limited to, statements about future financial and operating results; our plans, objectives, expectations and intentions with respect to future operations, products and services; and other statements identified by words such as “will likely result,” “are expected to,” “will continue,” “is anticipated,” “estimated,” “believe,” “intend,” “plan,” “projection,” “outlook,” or words of similar meaning. These forward-looking statements include, but are not limited to, statements regarding True Velocity’s industry and market sizes, future opportunities for True Velocity, and True Velocity’s estimated future results. Such forward-looking statements are based upon the current beliefs and expectations of our management and are inherently subject to significant business, economic, and competitive uncertainties and contingencies, many of which are difficult to predict and generally beyond our control. Actual results and the timing of events may differ materially from the results anticipated in these forward-looking statements.


Posted in Weapon systems | Tagged , , , | Comments Off on True Velocity, FN America Announce Global Manufacturing Partnership on Lightweight Medium Machine Gun

From Sea to Shining Sea

From Sea to Shining Sea

Hydra Weaponry MARCK-15 Modular rifle platform available to all Americans – even in California.

Hermon, Maine (June 2024)Hydra Weaponry, Maine’s largest firearms employer, designers, and manufacturers of the truly modular MARCK-15 Hydra® Weapon System, believe ownership of an AR-style firearm should not be denied to any lawful and legal American, including Californians. In response to all the compliance regulations California has dumped on its citizens, Hydra Weaponry offers a Cali-Compliant MARCK-15 Modular Rifle.

The Cali-Compliant rifle is set up as a 5.56 x 45 on a Hydra® Modular Lower Receiver with an AR mag well. The compliant 10-round AR magazine is fixed. The upper receiver is Hydra’s Quick-Change Barrel upper (QCB-D) with a 16-inch 5.56 bull-nose barrel with no gas port. The Hydra Modified Bolt Carrier with a 5.56 bolt and firing pin and a Hydra D-Fender D-Ring are all part of this unique modular system that serves as the base for additional multiple caliber conversions. The Cali-Compliant MARCK-15 rifle is built on a B5 Systems pistol-grip stock.

“Our Cali-Compliant MARCK-15 rifle features the same key elements of modularity, accuracy, and consistent performance as any of our other MARCK-15 models, but with all the state regulations of California built in,” Mack Gwinn, CEO of Hydra Weaponry added.

Cali-Compliant MARCK-15 Specifications:

  • Caliber: 5.56 x 45
  • Length: 21”
  • Height: 7”
  • Width: 3”
  • Barrell Length: 16″
  • Furniture: B5 Systems
  • Color: Black
  • Inserts: M-LOK, Keymod, Picatinny
  • MSRP: $1,399.00 – $1,537.99

For more information on Hydra Weaponry, visit the new website at www.hydraweaponry.com. 

About Hydra Weaponry:

Headquartered in Maine, Hydra Weaponry has 50 years of firearms innovation in its DNA. Starting with the development of the Bushmaster pistol, rifle, and submachine gun, the Gwinn family has set a high standard of designing innovative firearm platforms built around the actual needs of tactical operators, often fighting in extreme conditions and environments. The MARCK-15 Hydra Modular Weapons System is the ultimate modular platform that designer Mack Gwinn, Jr. created to meet the criteria of modularity, durability, consistent performance, accuracy, and affordable. Hydra Weaponry is the future of small arms.

Posted in Weapon systems | Tagged , | Comments Off on From Sea to Shining Sea

THALES SIGNS THREE AGREEMENTS WITH UKRAINIAN INDUSTRY TO STRENGTHEN FRONT-LINE SUPPORT AND LOCAL DEFENCE CAPABILITY

THALES SIGNS THREE AGREEMENTS WITH UKRAINIAN INDUSTRY TO STRENGTHEN FRONT-LINE SUPPORT AND LOCAL DEFENCE CAPABILITY

19 JUN 2024

  • Thales has signed at Eurosatory three agreements with Ukrainian industry under the aegis of the French Ministry of the Armed Forces and the Ukrainian Ministry of Strategic Industries.
  • These agreements aim to strengthen operational support of Ukrainian Armed forces front-line operations and reinforce local defense capability.
  • Domains of cooperation include Electronic Warfare, Tactical Communications, Air Defense Systems and radars, as well as Unmanned Aircraft Systems.

© Thales

The three agreements were respectively signed on behalf of Thales by Pascale Sourisse, Senior Executive Vice President, International Development, Christophe Salomon, Executive Vice President, Secure Communications and Information Systems and Hervé Dammann, Executive Vice President, Land and Air Systems.

Two agreements concern one of the enterprises of the Joint Stock Company, Ukrainian Defense Industry:

  1. The first agreement announces Thales’s intent to create a joint venture in Ukraine, which will facilitate the delivery and operations of equipment for the Group’s portfolio of defense systems, including Electronic warfare, as well as Tactical communications equipment, Air Defense systems and radars.
  2. The second agreement is specific to Electronic Warfare, where Thales will provide extensive maintenance, testing and specialized training. This agreement aims to develop local maintenance capability within Ukraine, which will reduce repair and maintenance cycles and ensure the best operational availability.

In a separate and third agreement, signed with Ukrainian UAV and UGV specialist FRDM, Thales intends to co-develop and manufacture with FRDM an Unmanned Aircraft system able to carry and release munitions.

Pascale Sourisse, Senior Executive Vice President, International Development said, “Thales is a long-standing partner to the Ukrainian forces, collaborating for more than 10 years, first in electronic warfare and then expanding to a broad range of programmes. ​ In the short term, these agreements further solidify Thales’s support of ensuring force readiness for Ukraine. Moving forward, they also demonstrate our commitment, through collaboration with leading Ukrainian players and suppliers, to establish a longer-term foothold in Ukraine and bolster the country’s local defense industry.”

Posted in Eurosatory | Tagged , , | Comments Off on THALES SIGNS THREE AGREEMENTS WITH UKRAINIAN INDUSTRY TO STRENGTHEN FRONT-LINE SUPPORT AND LOCAL DEFENCE CAPABILITY

EUROSATORY 2024 DAY 4 HIGHLIGHTS


EUROSATORY 2024 DAY 4 HIGHLIGHTS





Posted in Eurosatory | Tagged | Comments Off on EUROSATORY 2024 DAY 4 HIGHLIGHTS

The Rowdy XL from Bond Arms

The Rowdy XL from Bond Arms®

Granbury, TX (June 20, 2024) – So what would be better than taking Bond Arm’s popular Rough Series .45/410 Rowdy out to the range and firing off a few rounds? How about squeezing off a few rounds from Bond’s new Rowdy XL.

Bond Arms has taken all the things firearms enthusiasts love about the Rowdy, including its solid frame, quality engineered parts, and the power of the .45 Colt or .410 bore. But they didn’t stop there. They’ve improved it, enhancing the quality and comfort with the new Rowdy XL.

The Rowdy XL features a slightly larger 3.5″ barrel for better accuracy and B6 Grips with a smooth backstrap for a superior hold. Like its counterpart, the Rowdy XL also features a stainless steel double barrel and stainless steel frame, is compatible with all standard Bond Arms barrels, and an automatic spent casing extractor. Bond’s Rowdy XL also sports a patented rebounding hammer, retracting firing pins, cross-bolt safety, and a spring-loaded, cammed locking lever.

The Rowdy XL has substantially less recoil than the original Rowdy, mostly due to the new B6 Grips, which evenly distribute recoil while providing a full-hand feel. The Rowdy XL’s extra barrel length also adds a little bit of weight as opposed to the original Rowdy, which further helps with some of the recoil. The Rowdy XL can be fitted with any of the barrels that Bond features for their original hand cannons, except the Stinger and the Cyclops lines.

The Rowdy XL, despite its power and features, comes in at just 6” in length, 4.37” in height, and weighs just 22 ounces. This compact size and light weight make it a highly convenient and portable option. With a 7-pound trigger pull weight, this single-action, stainless steel hand cannon is not just powerful, but also one of the most convenient products on the market. That’s all without sacrificing the premium fit and finish that Bond Arms is famous for, using their process to trim down the Rowdy XL to create a firearm that is as robust as their pre-existing models.

Explore the full line of Bond Arms products by visiting bondarms.com.

This item is not available in California or Massachusetts.

Rowdy XL Features:

  • 45LC/.410 calibers
  • B6 resin grip material
  • Extended grip size
  • Fixed sights
  • Single Action
  • Stainless Steel
  • Rebouding Hammer
  • Automatic Spent Casting Extractor
  • Retracting Firing Pins
  • Spring Loaded, Cammed Locking Lever
  • Trigger guard
  • 7lb. trigger pull weight

Rowdy XL Specs:

  • 3.5 in. barrel length
  • 5.75 in.
  • 22 oz
  • 6.0″ Length, 4.37″ Height
  • 2 shot capacity
  • Single action
  • MSRP – $349.00

BOND ARMS, INC. is located in Granbury, Texas, and manufactures the award-winning Bond Arms Derringer – the finest in double barrel protection. Originally organized under the name Texas Armory, the company became incorporated as Bond Arms in 1995 with the idea that the Remington Model 95 over-under, single-action derringer could be converted from an Old West anachronism into a modern & reliable handgun. The barrel and frame were redesigned to safely fire modern calibers & the entire handgun is constructed entirely from stainless steel. This makes for a pistol that’s both strong and durable.

For more information, please visit WWW.BONDARMS.COM

Posted in pistols | Tagged , | Comments Off on The Rowdy XL from Bond Arms

Introducing the NEW SKYLINE PRO BIPOD

Pinnacle of Precision and Adaptability ͏

Logo

Check This Out

Introducing the New SKYLINE® PRO Bipod

Introducing the Warne® Skyline® Pro Bipod — the pinnacle of precision and adaptability for competitive shooters. Engineered from aircraft-grade aluminum, it maintains Warne’s rugged durability while introducing unparalleled adjustability. The Skyline Pro Bipod boasts three distinct stance angles of 72, 48, and 22 degrees, providing the perfect shooting stance regardless of obstacle or landscape. Adjusted with the simple push of a button, its innovative, geared design simultaneously adjusts both legs, providing a seamless, one-handed transition between positions, ensuring unmatched precision with every shot.

EXPLORE

WATCH VIDEO

Time is running out to enter for a chance to win in the

Mountain Man Giveaway

ENTER HERE

Shop by Category

BASES AND RAILS   SCOPE RINGS   PRECISION MOUNTS   MSR MOUNTS   BIPODS   MAGAZINE EXTENSIONS   NEW PRODUCTS


Warne Scope Mounts

9500 SW Tualatin Road, Tualatin, OR 97062

Posted in Accessories | Tagged , | Comments Off on Introducing the NEW SKYLINE PRO BIPOD

EXTREMA RATIO: BF2 CD M390 TACTICAL GREY

EXTREMA RATIO

clip_image001

BF2 CD M390 TACTICAL GREY is a folding knife made of Böhler M390 steel heat treated to 61 HRC that keeps the characteristics of one of the most famous Extrema Ratio EDCs.

clip_image002

lama rivestita in DLC

The blade features a flat grind and a particularly thick and resistant drop tip; it is coated with a carbon-based DLC (Diamond-Like Carbon) superficial treatment, which makes it hyper-resistant to abrasion and chemical aggression.

BF2 CD M390 TACTICAL GREY

acciaio Böhler M390 (61 HRC)

The steel is Böhler M390 heat treated to 61 HRC. Thanks to a powder metallurgical production process, it guarantees cutting effectiveness, resistance to wear and oxidation over time.

BF2 CD M390 TACTICAL GREY

manico in colorazione Tactical Grey

The handle features the new ‘Tactical grey’ colour and is composed of two full handle scales with the characteristic lowered slots to engage the opening pins without having them protruding from the blade when closed. The grip is firm and comfortable.

BF2 CD M390 TACTICAL GREY

clip_image003

clip_image004

clip_image005

Extrema Ratio S.R.L. Via Traversa delle Ripalte 72/74/76/78 – 59100 PRATO – Italy – info@extremaratio.com

Posted in Knives and Tools | Tagged , | Comments Off on EXTREMA RATIO: BF2 CD M390 TACTICAL GREY

Arsenal Custom Shop Services Available

Arsenal Inc USA

APPAREL | RIFLES | PISTOLS | MAGAZINES | PARTS | ACCESSORIES

Custom Shop Services

Arsenal Custom Shop
We Offer Services for Your Arsenal Firearms

Arsenal Custom Shop provides a range of services tailored for Arsenal brand firearms including SAM7K conversion, Cerakote application, QD Point installation, and AR-M5F installation on Arsenal milled receiver rifles. Let the Arsenal professionals service your Arsenal firearms with authentic Arsenal factory components.

Check Out Our Full List Of Services!
Learn More
We will continue to add additional services, but if you have specific needs or requirements, contact us and let us know what you need.

This Week’s Featured Services:

SAM7K Conversion Service

Arsenal offers a SAM7K conversion service. This allows customers to send in SAM7K model pistols to add a rear Picatinny rail (Rear Conversion), add a threaded front sight gas block (Front Conversion), or both.
Learn More

SAM7K Service

AR-M5F Rail Installation Service

This allows customers to send in their Arsenal milled receiver rifles and have Arsenal install the AR-M5F rail system.
Learn More

AR-M5F Service

4395 W Post Rd #100, Las Vegas, NV 89118
702-643-2220

Posted in Weapon systems | Tagged , | Comments Off on Arsenal Custom Shop Services Available

Mike Harvey, Founder of Cimarron Firearms, Celebrates Milestone Birthday


Mike Harvey, Founder of Cimarron Firearms, Celebrates Milestone Birthday

A passion turned hobby turned business, Cimarron Firearms founder Mike Harvey continues to design authentic classic American West firearms in his eighth decade.

Fredericksburg, Texas (June 2024) – Mike Harvey, founder of Cimarron Firearms, the makers of quality replicas of Old West firearms, celebrates a milestone birthday this month. With no retirement on the horizon, Mr. Harvey, who turns 80, is still very much a hands-on business owner. But then, Cimarron Firearms was never just a business, it was and still is his life’s passion.

A born and bred Texan, Harvey built his first replica, a Hawken rifle, in his youth. Soon, he began buying and trading Old West firearms until it became clear his hobby was getting the better of him. Harvey opened his first store in 1977, where customers could buy and trade classic firearms and muzzle-loading supplies. He named the Houston-based store “Bigfoot.” The store was not named after the legendary hairy creature of the Great Northwest but after Texas Ranger William Alexander Anderson “Big Foot” Wallace, a formidable man over 6 feet tall with 11-inch feet. Although not considered large by today’s standards, Big Foot Wallace left a large legacy as a soldier and Texas Ranger.

In the early 80s, Harvey saw a niche in the marketplace: a lack of quality replica historical arms. Partnering with Allen Firearms, the team imported replicas from Uberti of Italy. Unfortunately, the initial reproductions lacked authenticity, something Harvey was adamant about. Harvey upscaled the Uberti firearm offerings by providing design features that were authentic to the originals, from stamp marks, forging of revolver frames, and finishes. He would use pieces from his growing collection of antique firearms as the standard bearer for the replica that Uberti would build for him.

Harvey bought out Allen Firearms and Cimarron Firearms was founded in 1984. As to the company name, Harvey couldn’t come up with a name that resonated with him, and asked his friend and gun writer and magazine editor, Phil Spangenberger, for a suggestion. Phil suggested “Cimarron” explaining that it just sounded and felt “Western.”  The newly minted Cimarron Firearms relocated from Houston to its present location in Fredericksburg, Texas where the firearms are sold through its sister store, Texas Jack, a storefront location for everything western.

Harvey is considered by many to be a first-rate historian, not only regarding the firearms of the Old West but also the very men and women who shaped the West. The history of Cimarron Firearms recalled by Mike Harvey, makes for an interesting story about the birth of a unique company, and the infamous guns behind the colorful characters that built the West. Whether they were frontiersmen, Texas Rangers, lawmen, or scoundrels, Harvey can spin a colorful yarn about those days long ago that became legends.

Today, Cimarron Firearms continues to be the leader in authentic Old West firearms and the go-to for Hollywood Western films. Mike Harvey shows no signs of slowing down and classic gun fans can expect to see new replicas and interpretations soon. Happy Birthday, Mike.



For more information on Cimarron Firearms and accessories, visit www.cimarron-firearms.com.

About Cimarron Firearms:

Cimarron is the leader in quality and authenticity in replica firearms. For the past 30 years, Cimarron has worked continuously to perfect the authentic detail, fit, finish, and function of our line of frontier firearms. There is no other firearm that is near equal in value, strength, reliability, and authentic detail as is the line from Cimarron Firearms Co. 


Posted in Events | Tagged , | Comments Off on Mike Harvey, Founder of Cimarron Firearms, Celebrates Milestone Birthday

SnapSafe® NEW Premium Welded Safes

SnapSafe® NEW Premium Welded Safes 

Grand Island, NE (June 20, 2024) – SnapSafe® Premium Welded Safes provide peace of mind and valuable security, built with state-of-the-art materials and superior craftsmanship. SnapSafe understands the importance of keeping firearms secure and out of the hands of those who shouldn’t have access. It is also a great option to protect important documents and any number of valuables, from jewelry to coins.

By combining the durability of plate steel with rugged welded construction, SnapSafe® premium welded safes offer protection for a variety of household valuables. The convenient digital lock access, with its key override feature, ensures secure entry that is both quick and user-friendly. The 1200° 30-minute fire protection rating ensures enhanced protection of valuables should the unthinkable occur.

SnapSafe® recognizes that security is critical when choosing a home safe. Their premium welded safe lineup incorporates pre-drilled floor mounting holes to ensure the safe and its critical contents stay put.

With a range of sizes available, including 12, 18, and 30 gun options, SnapSafe® premium welded safes cater to every budget and need. The lined interior provides a smooth non-marring surface, and the adjustable shelves allow for safe customization. SnapSafe® is carefully designed to protect what is valuable and provide peace of mind. 

Premium Welded Safe Specifications:

EXTERIOR DIMENSIONS

· 12-Gun Welded Safe #75130: 55″H x 18″W x 14″D

· 18-Gun Welded Safe #75131: 55″H x 20″W x 17″D

· 30-Gun Welded Safe #75132: 55″H x 25″W x 20″D

FEATURES

· 1200°F 30-minute fire shield protection.

· Lined interior and adjustable shelves.

· Digital lock with key override.

· Pre-drilled for floor mounting

SnapSafe® is owned by Hornady® Manufacturing, a family-owned, third-generation business that has been designing, machining and producing bullets, ammunition, reloading products and security products since 1949.

For more information, please visit WWW.SNAPSAFE.COM

Posted in cases | Tagged , | Comments Off on SnapSafe® NEW Premium Welded Safes

Conceal like a pro with Incog X – Hellcat Pro fits now available!

Safariland Logo

Stealth Redefined. Incog X IWB Holster

Incog X Hellcat Pro Now Available - Find Your Fit

Incog X IWB Holster - $92.50 Find Your Fit

Incog X Mag Caddy - $35.00 Find Your Fit

Incog X and a Hellcat Pro on a table with a backpack, flashlight, and EDC belt

clip_image001

The Safariland Group | 1.800.347.1200

ONTARIO HQ
4700 Airport Drive
Ontario, CA 91761

JACKSONVILLE HQ
13386 International Parkway
Jacksonville, FL 32218

Posted in Holsters | Tagged , , | Comments Off on Conceal like a pro with Incog X – Hellcat Pro fits now available!

EUROSATORY 2024: SIMULATION IS PLAYING AN INCREASIGNLY PROMINET ROLE IN OPERATOR TRAINING

2112bdce-daf1-40d6-8d7e-c00ca9e87b15Kongsberg Defense & Aerospace Demonstrate Virtual Reality Simulation 

Kongsberg Defense & Aerospace is a major player in the defense industry, and their products have helped to protect countries around the world. The company is committed to developing innovative technologies that will continue to keep people safe for years to come.The company has a long history of innovation and has been at the forefront of developing defense and aerospace technologies for over 200 years. In addition to missiles, Kongsberg Defense & Aerospace also produces a variety of other defense products, including military communications systems and command and weapons control systems for naval vessels. These systems help to keep soldiers safe and secure by providing them with the tools they need to communicate and coordinate their activities


Posted in Eurosatory | Tagged , | Comments Off on EUROSATORY 2024: SIMULATION IS PLAYING AN INCREASIGNLY PROMINET ROLE IN OPERATOR TRAINING

Hornady Reloading – Perfect Case Preparation with the Hornady Lineup of Case Prep Tools

Hornady® Reloading – Perfect Case Preparation with the Hornady Lineup of Case Prep Tools

Grand Island, NE (June 20, 2024) – Hornady® Reloading understands the importance of case prep in developing consistent reloads. Case prep includes trimming, resizing, cleaning, and deburring fired cases. Hornady offers a wide range of case prep tools available to produce high-quality brass consistently.

The Lock-N-Load® Power Case Prep Center is a one-stop solution to case prep. It features a micro-adjustable trimmer, powerful motor, metal shaving catch tray, and various case cleaning accessories. It takes up a minimal amount of bench space at a fraction of the size of other tools. In addition, the system is capable of handling a variety of cartridges with interchangeable shell holders. Included are large and small primer pocket cleaners, six-neck brushes, and an assortment of shell holders.

Hornady Digital Cases and Parts Dryer ensures brass and firearms parts are completely dry after sonic cleaning. It consists of four fixed trays and one tray with a removable mesh. There is plenty of room to dry cases and larger gun parts. Load the trays with cases, choose from one of the seven temperature settings, and select the desired time. Dry brass prevents oxidation from occurring and results in higher-quality reloads.

The Hornady® Neck Turn Tool offers a precise means of turning cases and optimizing reloads. It is capable of turning a variety of case lengths. The Neck Turn Tool includes four of the most popular mandrels, 22 Cal., 6mm, 6.5mm, and 30 Cal. Pairing it with a drill (not included) quickly and consistently trims each case neck to the proper thickness. The cutting head adjusts in .0005″ increments with the detent system or removes the set screw for infinite adjustments. The result is optimized neck tension and more accurate reloads.

For a hands-on approach to case prep, the Lock-N-Load® Quick Change Hand Tool comes ready with various attachments. It is compatible with any tool with 8-32 threads, including chamfer, deburr, primer pocket reamers, cleaners, and brushes. The dual-sided chuck allows quick changeover between two tools by holding the release buttons. Additionally, the oversized handle features an ergonomic design to minimize fatigue during case preparation.


Hornady Reloading®, Hornady Security®, and SnapSafe® are owned by Hornady

Manufacturing Company, a family-owned business headquartered in Grand Island,

Nebraska. Proudly manufacturing products that are made in the USA, Hornady®

Manufacturing is a world leader in bullet, ammunition, reloading tool, accessory, and

security product design and manufacturing since 1949.

For more information, please visit WWW.HORNADY.COM

Posted in Ammunition | Tagged , | Comments Off on Hornady Reloading – Perfect Case Preparation with the Hornady Lineup of Case Prep Tools

New Product Drop – Nanuk 225 Case w/ Custom Foam

Need more from your case? THE FIX IT STICKS NANUK™ 225 HARDCASE w/ CuSTOM CUT FOAMKeep your tools protected from the elements with an impact-resistant ABS shell, water-resistant design & dust proof seal. ABS Shell crushproof resin. IP67 Ingress protection waterproof. IP67 Ingress protection dustproof. Save 10% with code: HC10 | Offer valid through 6/23/24

Custom cut foam. Your choice of Rifle & Optics All-In-One cut or Individual Torque Limiters cut. Length: 6.67" | Width: 3.52" | Height: 1.58" | Case shell -ABS | Pins/hardware - 304 Stainless Steel | Purge Valve - Nylon 66 Gore Membrane | Made in Canada. Save 10%: HC10

Fix It Sticks 4001 N. Ravenswood Chicago, IL 60613

Posted in Knives and Tools | Tagged , | Comments Off on New Product Drop – Nanuk 225 Case w/ Custom Foam

Accuracy Academy: Spots Are Limited!

Best Of The West Website

Join us for the first ever Accuracy Academy.

You’ll start our 2-day course with an overview of rifle safety and then jump straight into a presentation of the rifles and gear you’ll use. The rifles, ammo and gear for the course are all provided by Best of the West. Each student will be assigned a custom 6.5 Creedmoor built by Best of the West to complete the course along with ammunition.

Best of the west homepage.

RIFLES   ACCESSORIES   CONTACT

Best Of The West Arms 115 W. Yellowstone Ave. Cody, WY 82414

Posted in Training | Tagged , | Comments Off on Accuracy Academy: Spots Are Limited!

Panel Spotlight! | 2024 CBRN Defense Conference and Exhibition

CBRN Defense Conference and Exhibition

NDIA is thrilled to announce the confirmed panel of Demonstrations, Experiments, and Accelerating Acquisition featuring the following speakers:

king(1)_2840877.png

BG William King, USA (Ret)
Senior Fellow/Principal-Director, Booz Allen Hamilton

yuz(1)_2840873.png

Tom Yuzuik
Chief, Warfighter Integration Division, Defense Threat Reduction Agency

Kennedy

Dr. Julia Dooher
Chief Scientist, Office of the Chief Engineer, JPEO-CBRND

If you haven’t, register today to join other members of the CBRN Defense Community for this event at the Baltimore Convention Center on June 24 – 26, 2024. Anticipate in-depth discussions on evolving threats, requisite future capabilities and capacities for response and pandemic preparedness, acquisition reform, and the future of warfighter training and readiness. Secure your opportunity to join us in Baltimore!

Join us to connect with peers, industry leaders and decision makers! Secure your spot today!

For questions about registration, please email Raven LeMay at rlemay@NDIA.org.

clip_image001clip_image002


Engage with Experts: Hear from top leaders in government, industry, and academia about the latest in CBRN defense.
National Strategies and Priorities: Gain insights into national defense strategies and program priorities.
Innovative Solutions: Discover cutting-edge technologies and solutions addressing current and future CBRN threats.
Networking Opportunities: Connect with peers, industry leaders, and decision-makers.
Comprehensive Exhibition: Explore a wide range of products and services in the exhibition hall.

Visit with our Exhibitors!

Gain a sneak peek of the exhibitors that will be highlighted at this year’s conference. You can preview their profiles and see what they have to offer by visiting the floor plan by clicking here.

Thank You to Our Sponsors!

CBRN-sponsors_2842780.jpg

Dates
Date

June 24 – 26, 2024

Contact

Contact
Sarah Komar
NDIA
Associate Director, Meetings
(703) 247-9467
skomar@NDIA.org

Location

Location
Baltimore Convention Center
1 W Pratt Street
Baltimore, MD 21201

P.S. Check us out on social media!


clip_image003

National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201

Posted in CBRN | Tagged , , | Comments Off on Panel Spotlight! | 2024 CBRN Defense Conference and Exhibition

Swagger Bipods Hunter Series: The Original and Still Going Strong

Swagger Bipods Hunter Series: The Original and Still Going Strong

Grand Island, NE (June 20, 2024) – Swagger Bipods, a trailblazer in hunting accessories, boasts the success of its renowned Hunter Series bipods. Introduced initially as the epitome of maneuverability and adaptability in shooting rests, the Hunter Series remains a staple among hunters, reinforcing Swagger Bipods’ longstanding commitment to providing reliable equipment tailored to the unique demands of the field.

Having a solid shooting rest is paramount when hunting or shooting. In the unpredictable and dynamic settings of the great outdoors, the ability to swiftly adapt and establish a stable shooting position can make all the difference. Swagger Bipods excels at this, offering hunters unparalleled control and precision with its Quick Adapt Technology.

The Swagger Bipods Hunter Series attaches seamlessly to the sling stud of most rifles, eliminating the need for additional cumbersome gear. Available in two models – the Hunter 29 and the Hunter 42 – these bipods are engineered to swiftly adjust to the perfect height for shooting in various positions, whether standing, in a tree stand, sitting, or prone. This versatility is made possible by the bipods’ flexible legs and exceptional maneuverability, ensuring hunters can confidently maintain their target and take the crucial shot.

“The Hunter Series bipods have been a cornerstone of Swagger Bipods’ product line, embodying our commitment to innovation and excellence,” said a spokesperson for Swagger Bipods. “We understand the importance of adaptability and precision in hunting, and our Hunter Series bipods continue to deliver on these principles, offering hunters unmatched maneuverability and stability.”

With the Swagger Bipods Hunter Series, hunters can trust in the reliability and performance of their shooting equipment, empowering them to focus on what truly matters – the thrill of the hunt.

Hunter 29

  • Weight: 23.6 oz
  • Effective Range: 6 ¾” to 29”
  • Retail: $169.99

Hunter 42

  • Weight: 25.78 oz
  • Effective Range: 9 ¾” to 41 ¼”
  • Retail: $169.99

Hunter Series available in Veil Camo: $179.99

Swagger Bipods are made in the USA, incorporating numerous unique high-performance features, including our patented Flex Ready Technology built into many of our products. At Swagger, we are confident our bipods will do for you what no bipod has ever done before, and back this claim with our Limited Lifetime Guarantee.

Swagger bipods are also covered by our Shoot With Confidence Guarantee. If your Swagger bipod does not give you more shooting flexibility and more shooting confidence, send the product back to us within 30 days of purchase, with proof of purchase from an authorized dealer, and we will buy it back. No questions asked.

For more information, please visit WWW.SWAGGERBIPODS.COM

Posted in Accessories | Tagged , | Comments Off on Swagger Bipods Hunter Series: The Original and Still Going Strong

Today is your day to GO GREEN

‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌  ‌ ‌ ‌ ‌ ‌ ‌ ‌

clip_image002

clip_image003

EYES SEE GREEN BETTER

To prove that we are offering 20% OFF our industry leading green laser sights and green dot optics.

in 2006, Viridian created the world’s first green laser sight for pistols and initiated a new era of upgraded accuracy. It may not sound like a big deal, but the color of your laser can have a major effect on accuracy.
Green light is notably easier to distinguish than red light because it triggers a higher number of receptor cells in the human eye. Viridian Green Lasers utilize a 510-532nm wavelength range near the center of the visible spectrum, creating an optimum targeting dot that’s up to 50x brighter than the conventional red, visible at all times, under all conditions, and effective at distances no ordinary laser can achieve indoors or outdoors.

EXPERIENCE THE DIFFERENT &

GO GREEN TODAY


GREEN SALE: Offer ends soon. Discount applied automatically at checkout. Certain restrictions may apply. Certain product categories or specific products may not be eligible for or are excluded from promotions or discounts, and these exclusions will be left to Viridian’s discretion. See website for details. This offer cannot be combined with any other offers, sales or promotions. Offer not valid on refurbished units or already discounted items. Void where prohibited. All items subject to Viridian Limited Warranty provisions. Sales valid for U.S. customers only. Applies only to orders placed on ViridianWeaponTech.com. Please allow 5-7 business days for order to ship. Offer is one-time use only.

5475 Pioneer Creek Drive, Maple Plain, MN 55359

Posted in Laser Based Technologies | Tagged | Comments Off on Today is your day to GO GREEN

RED CAT INTRODUCES NEW FAMILY OF LOW-COST, PORTABLE UNMANNED RECONNAISSANCE AND PRECISION LETHAL STRIKE SYSTEMS

SAN JUAN, Puerto Rico, June 17, 2024 (GLOBE NEWSWIRE)Red Cat Holdings, Inc. (Nasdaq: RCAT) (“Red Cat”), a drone technology company integrating robotic hardware and software for military, government, and commercial operations, today introduced its new family of unmanned Intelligence, Surveillance, and Reconnaissance (ISR) and precision lethal strike systems. The announcement, made on the first day of Eurosatory in Paris, comes on the heels of Red Cat’s LOI to acquire FlightWave Aerospace Systems Corporation.

Red Cat’s family of ISR and precision strike drones will provide the industry with an alternative to conventional ISR/strike systems on the market that are high cost and non-retrievable. Red Cat’s sensor-to-shooter (S2S) system for identifying targets with optional precision strike capabilities is differentiated from other systems with its low cost portable drones. The objective of this new family of systems is to meet the increasingly urgent need of the Pentagon’s Replicator Initiative for swarms of low-cost “attritable” ISR and surgical strike drones deployable in air, land, sea, and sub-sea environments.

Red Cat’s mission is to redefine the role of sUAS for defense applications by combining the capabilities of ISR drones with precision strike payloads. The company is an established leader in the sUAS (Group 1) space with its flagship Teal 2 aircraft. As part of the new family of systems, Red Cat is introducing FANG™, a new First-Person View (FPV) drone with precision strike payload capabilities. The FPV drone is currently undergoing Blue UAS certification. The acquisition of FlightWave’s Edge 130 rounds out the family of systems, which will include all current and future Teal models.

“The entire nature of warfare and use of drone technology is undergoing a fundamental shift, and this new family of systems will completely disrupt the traditional ISR and loitering munition systems market,” said Jeff Thompson, Red Cat CEO. “Warfighters will be able to choose the right combination of drones and payloads for their specific missions and have access to an ecosystem of tactical AI, computer vision, and machine learning software that can positively identify threats and then have the option to engage and eliminate those targets.”

Red Cat’s new family of low-cost and portable unmanned ISR and precision lethal strike systems includes three aircraft with complementary capabilities and a common Ground Control System (GCS) such as the Android Tactical Assault Kit (ATAK) for multi-vehicle command and control:

The Edge 130 Blue, a Hybrid VTOL system, can be assembled and ground or hand-launched in just one minute by a single user to capture high-accuracy aerial imagery with long-range autonomy. Weighing only 1200g, the Edge can fly for over 2 hours in forward flight mode, an industry-leading endurance among all other Blue UAS approved drones available.

Teal 2 and future variants are cost-effective, man-portable sUAS designed to “Dominate the Night™” that has best-in-class night vision, multi-vehicle control, and a fully modular design. Teal 2 has a flight time of 30 minutes and it is both Blue UAS Certified and FAA Remote ID approved. Used together with FPV strike drones, Teal drones can be used to provide battle damage assessment once a target has been engaged.

FANG™, an FPV drone with a flight time of 10 minutes (under development and undergoing Blue UAS certification), will add surgical strike capabilities. Warfighters can combine and deploy these FPV drones with lethal payloads and ISR drones based on the mission profile for seek and destroy capabilities.

“We are at the forefront of a new innovation cycle for the drone industry,” said George Matus, Red Cat CTO. “Technology integrations and partnerships that connect and optimize this new family of systems will play a significant role in its success. Open architecture and established relationships with some of the leading hardware and software companies in autonomy, AI, machine learning and computer vision will enable us to expand our capabilities over time.”              

The new family of systems will require ongoing industry collaboration, underpinned by the Red Cat Futures Initiative. Both through Red Cat’s agile internal research and development, as well as partnerships, there is significant opportunity to optimize the family of systems with higher capacity batteries, C2 links, dedicated Electro-Optical (EO) and thermal payloads, and other accessories and decision support software. Additionally, Red Cat has the ability to manufacture these systems at a high production rate with repeatability to meet the demands of customers globally.

For more information about the Red Cat family of systems and capabilities, visit: https://redcat.red/solutions/family-of-systems/

About Red Cat, Inc. 
Red Cat (Nasdaq: RCAT) is a drone technology company integrating robotic hardware and software for military, government, and commercial operations. Red Cat’s solutions are designed to “
Dominate the Night™” and include the Teal 2, a small unmanned system offering the highest-resolution thermal imaging in its class, the Edge 130 Blue, and the industry’s first Blue UAS certified FPV drone, FANG™, optimized for the defense industry with surgical strike capabilities. Learn more at www.redcat.red.

Forward-Looking Statements
This press release contains “forward-looking statements” that are subject to substantial risks and uncertainties. All statements, other than statements of historical fact, contained in this press release are forward-looking statements. Forward-looking statements contained in this press release may be identified by the use of words such as “anticipate,” “believe,” “contemplate,” “could,” “estimate,” “expect,” “intend,” “seek,” “may,” “might,” “plan,” “potential,” “predict,” “project,” “target,” “aim,” “should,” “will,” “would,” or the negative of these words or other similar expressions, although not all forward-looking statements contain these words. Forward-looking statements are based on Red Cat Holdings, Inc.’s current expectations and are subject to inherent uncertainties, risks and assumptions that are difficult to predict. Further, certain forward-looking statements are based on assumptions as to future events that may not prove to be accurate. These and other risks and uncertainties are described more fully in the section titled “Risk Factors” in the final prospectus related to the public offering filed with the Securities and Exchange Commission. Forward-looking statements contained in this announcement are made as of this date, and Red Cat Holdings, Inc. undertakes no duty to update such information except as required under applicable law. 

Posted in Eurosatory, UAV | Tagged , , | Comments Off on RED CAT INTRODUCES NEW FAMILY OF LOW-COST, PORTABLE UNMANNED RECONNAISSANCE AND PRECISION LETHAL STRIKE SYSTEMS

The Ultimate EDC OTF

BENCHMADE

GO FAST,CARRY LIGHT  THE ULTIMATE EDC OTF IN A DROP-POINT PROFILE

5371FE SHOOTOUT

5371BK-01 SHOOTOUT

YOURS, FOR LIFE

Benchmade Knife Company 300 Beavercreek Road Oregon City, Oregon 97045

Posted in Knives and Tools | Tagged , , | Comments Off on The Ultimate EDC OTF

Geissele Automatics & EuroOptic Scope Giveaway

Shop Now Link

Shop Now Link

Shop Now Link

Shop Now Link

Let's Connect

Contact Us

Contact Us

WHG Properties, LLC

Posted in Promotions | Tagged , | Comments Off on Geissele Automatics & EuroOptic Scope Giveaway

New Recon Digital Muffs | Available Now!

Walker's Game Ear Logo

ELECTRONIC MUFFS   PASSIVE MUFFS   EAR BUDS

Recon Muffs

New RECON DIGITAL MUFF now available!

As part of our commitment to providing the most innovative and cutting-edge hearing protection available, Walker’s is proud to introduce our all-new RECON™ Digital Electronic Muffs. These IPX4-rated muffs feature an advanced digital audio circuit and full dynamic range HD speakers wrapped in a sleek, rugged design. These muffs have our highest noise reduction rating of 26 decibels to ensure your hearing is always protected. Available in Black or FDE.

Recon MuffRecon Muff


SHOP NOW

For over 25 years Walker’s has developed innovative solutions to provide ear protection for shooting, hunting, and commercial applications. Walker’s line of products is widely considered the industry standard for shooting ear protection and safety. With the introduction of advanced digital circuitry & nano tech water repellence, Walker’s continues to raise the bar and provide the best shooting hearing protection.

Contact Us

Walkers

5250 Frye Rd Irving, Texas 75061

Posted in Hearing Protection | Tagged , | Comments Off on New Recon Digital Muffs | Available Now!

The Fortis Tactical Helmet is Back!

Can’t see this email? View in Your Browser

link home

Graphic

Graphic

We’re excited to announce that our Fortis Ballistic Helmet is back in stock and better than ever! Designed for ultimate protection and comfort, this high-cut helmet is crafted from advanced ballistic fibers, weighing just 2.8 lbs. to minimize fatigue while maximizing mobility.

SHOP NOW

FEATURES

  • Level IIIA protection
  • Industry-leading backface deformation (BFD)
  • Weight: 2.8lbs
  • ACH (Advanced High Cut)
  • 7075 NVG mount
  • Glass-reinforced polycarbonate rails
  • Available in S/M and L/XL
  • Padding and dial adjustment system for the perfect fit
  • Velcro attachment system
  • 5-year warranty

Act Fast! This helmet didn’t last long before, so secure your Fortis Tactical Helmet today to experience cutting-edge protection at an unbeatable price!

LEARN MORE

Image of Fortis Ballistic Helmet

Fortis Ballistic Helmet

$539.95

Shop now


link to our story

Stay connected with us on social media for the latest updates and sneak peeks at upcoming releases.

Premier Body Armor 575 Separk Cir. Gastonia, NC 28054

Posted in Ballistic Protection | Tagged , , | Comments Off on The Fortis Tactical Helmet is Back!

Tasmanian Tiger TT Plate Carrier QR LC Receives an Overall Score of 3.95 out of Five In the 2024 NTOA Member Tested and Recommended Program

Tasmanian Tiger® TT Plate Carrier QR LC Receives an Overall Score of 3.95 out of Five In the 2024 NTOA Member Tested and Recommended Program

The TT Plate Carrier QR LC was field-tested and recommended by law enforcement officers in the National Tactical Officers Association (NTOA) Member Tested and Recommended Program.

Knoxville, Tenn. (June 2024)Tasmanian Tiger®, a tactical nylon line of products distributed exclusively for the US market by Proforce Equipment, Inc., is proud to announce that the TT Plate Carrier QR LC received an overall score of 3.95 out of five from the National Tactical Officers Association (NTOA) Member Tested and Recommended Program.

The TT Plate Carrier QR LC was reviewed by three members of the NTOA. As part of the Member Tested and Recommended Program, the officers tested the TT Plate Carrier QR LC while on the job for maximum testing for design, performance, application, versatility, and other pertinent features.

“I really enjoyed this plate carrier. You can wear it for hours and not get fatigued in the neck/trap area. The quick disconnect is also a plus and takes away the noise factor of Velcro,” review by the Nebraska Officer.

The officer from Nebraska opted to switch out the original cummerbund for the MOLLE Style cummerbund that came with the TT Plate Carrier QR LC for comfort and to provide more room for gear.

“This plate carrier is exceptionally lightweight, thanks to its laser-cut MOLLE system. This translates to unmatched agility and freedom of movement during critical operations. Our SWAT team members felt unrestricted and reported a significant improvement in maneuverability compared to bulkier carriers,” review by the Arkansas Officer.

The officer reviewing the TT Plate Carrier QR LC from Arkansas is part of a SWAT Team that rigorously tested the plate carrier. He deemed it an excellent choice for SWAT teams and tactical professionals who prioritize lightweight mobility and ease of use without compromising on protection. The team appreciated the streamlined design which made the carrier snag-free when going through tight spaces. He also liked the ROC buckle that allowed for swift removal of the plate carrier in emergencies, proving to be easy to use and reliable during the SWAT Team drills.

He concluded by saying “The Tasmanian Tiger Plate Carrier QR LC is a top-tier option for SWAT teams and tactical professionals seeking a lightweight, agile, and user-friendly plate carrier solution.”



This lightweight plate carrier is designed to offer a sleek and modern look, with a MOLLE system in laser-cut technology. The TT Plate Carrier QR LC is designed to fit SAPI plates of 12 x 10 in. (30 x 25 cm). It features a quick-release system with ROC buckle, which allows the wearer to quickly and easily remove the plate carrier in case of an emergency. The shoulder straps are adjustable, ranging from a minimum of 11 in. (28 cm) to a maximum of 20 in. (52 cm), providing a comfortable and customized fit for all users.




One of the most notable features of the TT Plate Carrier QR LC is its laser-cut MOLLE system, which gives the plate carrier a clean and streamlined look. The front and side areas of the plate carrier also feature a MOLLE system, which allows for individual customization and extension.

Additionally, the TT Plate Carrier QR LC is compatible with many other TT products, allowing for seamless integration. The plate carrier also includes an integrated radio equipment pocket and switchable side sections for using pouches for ballistic side plates.

The TT Plate Carrier QR LC weighs 2.87 lbs. and is made from Cordura® 700 Denier (MultiCam 500 Denier). It is available in Black, Olive, and Coyote for an MSRP of $449.00 and MultiCam for an MSRP of $499.00.

Click to see the Tasmanian Tiger New Items digital catalog here or the Vol. 3 Product digital catalog here. Find a local dealer here for any of the exciting Tasmanian Tiger products.

All sales inquiries can be directed to tt@tasmaniantigerusa.com.


About Tasmanian Tiger®:

Tasmanian Tiger®, a division of Tatonka GmbH, is an international brand founded in 1999 to provide user-design-driven nylon products to elite warfighters and law enforcement in Europe and Asia. From prototype to production, all products are manufactured in the company’s own facilities, thus ensuring a consistently high level of quality throughout the production processes. All products are quality checked before leaving the facility and checked regularly by independent international test centers.

USA: www.tasmaniantigerusa.com

Worldwide: https://www.tasmaniantiger.info/en/.


Posted in Ballistic Protection | Tagged , , | Comments Off on Tasmanian Tiger TT Plate Carrier QR LC Receives an Overall Score of 3.95 out of Five In the 2024 NTOA Member Tested and Recommended Program

Free EDC Fanny Pack – Limited Time

Receive a Free EDC Fanny Pack When You Spend Over $250 at the SIG Webstore - While Supplies Last

Receive a Free EDC Fanny Pack When You Spend Over $250 at the SIG Webstore – While Supplies Last

This custom-made fanny pack from 221B Tactical is designed for discreet off-body carry for your SIG SAUER pistol. It features a loop inside to firmly attach a modular holster with Velcro hook backing. It offers an adjustable strap with a quick detachable clip and easy-grab zipper straps so the pistol may be accessed quickly.

USE CODE: EDC24

While supplies last, you receive this fanny pack for free when you order anything at the SIG Webstore over $250. Just use the coupon code below.

USE CODE: EDC24

VISIT THE SIG WEBSTORE NOW

P365 17-Round Mag

P365 17-Round Mag

4.8 ★★★★★ 3,581 Reviews

SHOP ALL P365 MAGS

P320 Compact 17-Round Mag

P320 Compact 15-Round Mag

4.8 ★★★★★ 727 Reviews

SHOP ALL P320 MAGS

FOXTROT-EDC Handheld Flashlights 

Inspired by the streamlined versatility of the FOXTROT weapon light family, SIG SAUER’s new FOXTROT-EDC packs high output power into two handheld designs for any application.

Available in Full Size or Compact (Standard and ROSE) configuration, each FOXTROT-EDC boasts 1,350 Lumens and 33,000 Candela for ample throw and power in low light conditions. Both lights come with a powerful rechargeable Lithium-Ion battery (Compact: 18350, Full-Size: 18650) and two interchangeable tailcaps.

The FOXTROT-EDC is optimized for personal and professional use, fitting comfortably in your jeans pocket or affixed to a vest.

LEARN MORE ABOUT THE FOXTROT-EDC AND BUY NOW

EDC Belts

Choose from three styles of construction specifically for everyday carry.

SHOP BELTS NOW

EDC Knives

Choose from eight styles of everyday carry knives from SOG, Kershaw and Hogue.

SHOP KNIVES NOW

Last Chance to Save Big on Two Service Packages from SIG Custom Works

Offer Ends July 1!

Is your pistol ready for a summer of range time? SIG Custom Works is offering big savings on their two most popular service packages now through July 1, 2024 to help you prepare for summer training.

Full Service Plan

Bring your SIG SAUER pistol back to peak operational readiness with fresh springs and a full sonic cleaning.

Detailed stripping with complete and thorough cleaning of the pistol. Professional safety inspection of critical components by Custom Works personnel. Replacement of springs prone to wear and any needed small parts. Includes lubrication to factory standards, reassembly and testing.

WAS: $89.99

NOW: $69.99

(X-Ray) SIG Service Package

Optimize your SIG SAUER with upgraded night sights, fresh springs and a full sonic cleaning.

  Includes full disassembly, complete cleaning, expert factory inspection of all critical components, and replacement of springs (recoil, slide catch lever, trigger bar, decocking lever), reassembly and lube to factory specs, installation of XRAY3 night sights and testing.

WAS: $149.99

NOW: $119.99

Ask us what other upgrade options may be available for your firearm while in house for additional special pricing!

Shipping is $55 total, no matter how many guns you decide to send in for service. Services not applicable for certain models, federal and state restrictions apply.

Ways to Place Your Service Order

HOURS: Monday-Friday 8:30am-5pm EST

★ Call Customer Service at 603-610-3000, Option 1

★ Email Us: Visit the Customer Service Contact Page

★ Use the Chat Function on our Website

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Promotions | Tagged , | Comments Off on Free EDC Fanny Pack – Limited Time

EUROSATORY 2024: DAY 2

Eurosatory 2024: Day 2 Highlights

Here are a couple highlights from June 18 at Eurosatory 2024:

Focus on future warfare:    There was a roundtable discussion on “The new battlefield: Space defence and the future of military operations” This suggests that experts at Eurosatory are looking at the evolving nature of warfare and its expansion into the space domain.

Laser technology advancements:   A keynote session titled “Laser focused defence: Mastering drone warfare with high energy lasers and dazzling technology” shows that Eurosatory 2024 is featuring advancements in laser weaponry to combat drone threats.

These are just a few highlights from Eurosatory 2024, Day 2. The event continues to be a platform for innovation, international cooperation, and debate on the future of warfare.

Posted in Eurosatory | Tagged | Comments Off on EUROSATORY 2024: DAY 2

SIG SAUER ROSE Seminar Series Featuring Lena Miculek at Securite’ Gun Club in Washington State

SIG SAUER ROSE Seminar Series Featuring Lena Miculek at Securite’ Gun Club in Washington State

NEWINGTON, N.H., (June 18, 2024) – SIG Elite Store, Securite’ Gun Club in Woodinville, Washington will host the SIG SAUER ROSE Seminar Series featuring Team SIG professional shooter Lena Miculek this Saturday, June 22, 2024.

The ROSE Seminar Series is an in-store experience tailored to women of all skill levels that encourages community and empowerment in your firearms journey featuring Team SIG Professional Shooter Lena Miculek.  The schedule for the ROSE by SIG SAUER in-store experience is as follows:

10:00am – 4:00pm: A try-before-you buy experience hosted by the SIG SAUER Training Team featuring SIG SAUER ROSE series pistols and a broad array of SIG SAUER pistols, rifles, optics, and ammunition available to try.  Additionally, SIG SAUER will host a ROSE pop-up store with exclusive ROSE branded items available for purchase.

11:00am & 2:00pm: Miculek will host two sold-out seminars at Securite’ Gun Club covering the how-to basics of incorporating red dot optics into your EDC routine with a product walk through of the newly released ROMEO-X COMPACT ROSE.  To join the seminar waitlist please contact the host location directly for details.

Miculek will be in-store throughout the day, and available to meet customers and sign autographs.  For specific store event information visit event information at Securite’ Gun Club located at 11910 Woodinville Drive, Woodinville, WA.

The next stop on the ROSE Series is Saturday, September 21, 2024 at Ally Outdoors in Midland, Texas.  Visit sigsauer.com for the full 2024 ROSE Seminar Series schedule.

Become a member of the ROSE Community on Facebook for continued information about the ROSE Seminar Series, get exclusive updates about the ROSE program, and be the first to know about product launches.  Access the full ROSE by SIG SAUER training series with Lena on the ROSE YouTube channel and visit sigsauer.com/rose specific product information and additional program details.

Get Social: follow SIG SAUER on Facebook, Twitter, Instagram, and YouTube for the latest news, product announcements, events, and updates.



About SIG SAUER, Inc.

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training.  For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision.  Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens.  Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy.  Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities.  SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: sigsauer.com.


FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

Posted in Training | Tagged , , , | Comments Off on SIG SAUER ROSE Seminar Series Featuring Lena Miculek at Securite’ Gun Club in Washington State

Introducing Galco’s 1×5 Ammo Carrier!

HOME  HOLSTERS  AMMO CARRIERS  BELTS  FAQ

Introducing Galco’s 1×5 Ammo Carrier!

June 2024

The 1×5™ Ammo Carrier is a belt slide cartridge carrier that holds five large-caliber revolver rounds for easy access. The cartridges are divided for easy speed or tactical reloading. The updated design uses belt slots, can be used as a quick on-off design by simply sliding the flap under one’s belt and snapping it closed, or can be attached to the Great Alaskan Chest Holster with the included Chicago screws.

Constructed of premium steerhide, it’s available in black or tan finish. Ambidextrous and fits belts up to 1 3/4″ wide.

See all of Galco’s Ammunition/Accessory Carriers! 

Dealer inquiries:

800-874-2526 dealersales@galcoholsters.com

Galco International | 2019 W Quail Ave | Phoenix, AZ 85027 US

Posted in Holsters | Tagged , | Comments Off on Introducing Galco’s 1×5 Ammo Carrier!

SurgeX Package Raffle

Logo

Enter To Win the “Faster Form 4” Raffle  Valued Over $1,400

Rugged Suppressors Partnered With The American Suppressor Association On Their “Faster Form 4” Raffle.

Since 2011, the American Suppressor Association has led the charge in the fight for your suppressor rights, including your right to faster Form processing. ASA’s work is the reason why NFA wait times are now measured in hours and days instead of months and years!  This exciting fundraiser features eight incredible packages with a total value of more than $20,000! All proceeds will support ASA’s ongoing efforts to advocate for and protect the rights of suppressor owners nationwide.

Enter by June 28th For A Chance To Win A Package That Includes:

Rugged Suppressors SurgeX™

$100 Cole-Tac Gift Card

Tax Stamp Covered by SilencerShop

Help protect your right to own and use suppressors by buying a raffle ticket today.  Your donations are the lifeblood that gives ASA the resources to fight for your rights!

Rugged Suppressors is a proud supporter of the ASA.

clip_image001

*No purchase necessary to enter or win. See terms & conditions for details.

Logo
Rugged Suppressors 1 Tungsten Trail Travelers Rest, SC 29690 USA

Posted in Promotions, Suppressors | Tagged , | Comments Off on SurgeX Package Raffle

July Courses Available at Volusia County Gun Club

SIG SAUER Academy Courses at Volusia County Gun Club!

Enrollment is open for our Beginner, Intermediate, and Advanced courses at Volusia County Gun Club! Join us for an amazing set of courses tailored to your skill level. Whether you are a civilian, armed professional, or somewhere in between, we have something for you! Take your skills to the next level and secure your spot today.

Beginner:

Intermediate:

Advanced:

Have you had the opportunity to take an Armorer’s course? This hands-on program focuses on mechanical functioning, disassembly, reassembly, maintenance, troubleshooting and more. If you’ve taken SIG SAUER Academy Shotgun 101 or have equivalent experience, enroll now!

Armorer Certification:

Skill Builder:


231 Exeter Road Epping, NH 03042
603-610-3400
sigsaueracademy.com

Posted in Training | Tagged , | Comments Off on July Courses Available at Volusia County Gun Club

NSSF Prioritizes Cybersecurity Awareness for Its Member Organizations With KnowBe4 Training

NSSF

June 18, 2024

NSSF Prioritizes Cybersecurity Awareness for Its Member Organizations With KnowBe4 Training

NSSF focuses on cybersecurity initiatives to strengthen the industry’s security posture and mitigate human risk

WASHINGTON, D.C. — NSSF®, The Firearm Industry Trade Association, today announced that it has entered into an agreement with KnowBe4, the provider of the world’s largest security awareness training and simulated phishing platform, to enhance security awareness efforts and to bolster overall security culture for its member organizations. NSSF members will have exclusive access to special offers from KnowBe4 accessible through the NSSF member portal.

KnowBe4 helps to make employees more aware of and teaches them how to respond to cybersecurity threats such as phishing and social engineering that frequently affect organizations. Social engineering and phishing are responsible for 70-90% of all malicious data breaches. KnowBe4 impacts organizations’ human firewall with awareness training that includes baseline testing, user training and automated simulated phishing attacks for businesses of all sizes to build a more resilient and secure organization.

“Through frequent phishing email tests as well as mandatory monthly cybersecurity awareness training modules, our staff has become much more attuned to the attacks that they will encounter in the real world. We have built the muscle memory critical to reporting incidents as quickly as possible to limit any impact of a real-world incident,” said Joe Bartozzi, NSSF President and CEO.

“We are offering our world-class training and simulated phishing platform to the member organizations of the NSSF to help strengthen the industry’s cybersecurity posture,” said Stu Sjouwerman, CEO, KnowBe4. “This enhanced relationship provides us with endless opportunities to help organizations better manage the ongoing problem of social engineering. By taking an active role in improving the NSSF’s security culture, they are ultimately helping to build stronger protections against attacks via the often forgotten human element.”

For more information on KnowBe4, visit www.knowbe4.com.

NSSF also encourages all members of the firearm industry and related businesses to view its recent SHOT UniversityTM Cybersecurity Webinar – Cybersecurity Threats and Protecting Your Business – where a panel of IT experts from some of the firearm industry’s leading brands discuss methods and solutions for improving security culture and protecting a business from cybersecurity threats.


About NSSF

NSSF is the trade association for the firearm industry. Its mission is to promote, protect and preserve hunting and the shooting sports. Formed in 1961, NSSF has a membership of thousands of manufacturers, distributors, firearm retailers, shooting ranges, sportsmen’s organizations and publishers nationwide. For more information, visit nssf.org.

About KnowBe4

KnowBe4, the provider of the world’s largest security awareness training and simulated phishing platform, is used by more than 65,000 organizations around the globe. Founded by IT and data security specialist Stu Sjouwerman, KnowBe4 helps organizations address the human element of security by raising awareness about ransomware, CEO fraud and other social engineering tactics through a new-school approach to awareness training on security. The late Kevin Mitnick, who was an internationally recognized cybersecurity specialist and KnowBe4’s Chief Hacking Officer, helped design the KnowBe4 training based on his well-documented social engineering tactics. Organizations rely on KnowBe4 to mobilize their end users as their last line of defense and trust the KnowBe4 platform to strengthen their security culture and reduce human risk.


National Shooting Sports Foundation | 6 Corporate Drive | Shelton, CT 06484 US

Posted in Cyber, NSSF/NRA, Training | Tagged , , | Comments Off on NSSF Prioritizes Cybersecurity Awareness for Its Member Organizations With KnowBe4 Training

First Ever LaRue Five & Dime Sale !!!

LaRue Logo

1.jpg 2.jpg 5.jpg 3.jpg 4.jpg 6.jpg 8.jpg 9.jpg

MBT FIVE & DIME SALE

It is the time of the year to reflect on Freedom and what it takes to maintain it.
Declare your Independence from nasty trigger creep and crunch by buying LaRue MBT’s by the fist-full.
Our ‘MBT Five & Dime’ sale allows you to stock up on our CNC Billet-machined, electronically-tested triggers to keep you Well-Regulated in this current political climate.
Buy 5 @ $99/each
Buy 10 @ $87/each

You’ve been wanting a free LaRue Hat … here’s your chance.
Each bundle of 5 ships with a FREE LaRue Hat ($30 Value), bundles of 10 ship with (2) hats.
Triggers are in-stock and will ship immediately – Add to Cart for sale pricing.
Discount applicable to both styles (curved & straight).
Before you ask, pricing works with any mixture of styles – you can purchase 3 straight and 2 curved, 7 curved and 3 straight – and still get the sale price.
Thanks in advance for your business,
Mark LaRue

LaRue Tactical · 850 County Road 177 · Leander, TX 78641 · USA

Posted in Promotions | Tagged , | Comments Off on First Ever LaRue Five & Dime Sale !!!

FALCO® Holsters Now Custom-Fit for Over 3,100+ Handgun Models

FALCO® Holsters Now Custom-Fit for Over 3,100+ Handgun Models and 65+ Lights and Lasers

Ft. Lauderdale, FL—JUNE 18, 2024 – FALCO Holsters, a global leader in crafting innovative holsters and EDC accessories, is excited to announce that its holsters are precisely tailored to fit more than 3,100 handgun models and over 65 lights and lasers.

“FALCO’s extensive selection of custom-fit holsters ensures that gun owners receive a holster made specifically for their firearm and accessories,” explained Katarína Zacharová, Vice President of Sales and Marketing at FALCO Holsters. “Our custom-fit FALCO leather, Kydex, and hybrid materials are molded to each firearm to provide comfort, convenience, and, most importantly, safety for responsible everyday carry.”

Zacharová added, “One of our priorities is to serve the entire firearms community by providing high-quality, safe, and reliable holsters—especially for owners of less common firearms and those with weapon-mounted lights or lasers. Many people struggle to find holsters that meet their specific needs because holster manufacturers often overlook their rarer handgun models. FALCO bridges this gap, ensuring that every gun owner can find a holster offering full coverage, comfort, and safety for their unique firearms and accessories.”

Zacharová also pointed out that three key factors should be prioritized when choosing a holster: a covered trigger, sufficient retention on the firearm, and a design that provides safe re-holstering.

Newest guns and WMLs Compatible with FALCO Holsters

FIREARMS:

  • BOBERG XR9-S 3.35″ 9mm
  • Chiappa Rhino 50 DS
  • H&K VP9 Match 5.51″ 9mm
  • KelTec P-17 3.93″ .22 LR
  • Mauser Luger P08 4″ 9mm
  • PSA 5.7 Rock 5.7×28 FN
  • Rock Island Armory RIA 5.0
  • Sig Sauer P210 Target
  • Staccato 2011 CS, Cocked & Locked 3.5″ 9mm – 2023 edition
  • Taurus 856
  • Taurus GX4XL 3.71″ 9mm

LIGHTS:

  • Crimson Trace CMR-209
  • LaserMax Spartan SPS-C-R
  • Olight PL-3R Valkyrie
  • Solofish SL-1091
  • Streamlight TLR7X

“Don’t settle for a universal holster style that doesn’t meet all your needs,” added Zacharová. “Your safety and comfort are paramount.”

For more information about FALCO Holster handgun and accessory compatibility, visit FALCOHolsters.com.

Contact Vice President of Sales and Marketing Katarína Zacharová at katarina.zacharova@falcoholsters.com to learn more about becoming a trusted FALCO Holsters retailer.

 

About FALCO® Holsters, The Gun Holsters Company

FALCO Holsters epitomizes the perfect blend of modern innovation and traditional craftsmanship in handmaking custom handgun holsters, bags, and EDC accessories. Established in 1989, the FALCO brand has evolved from its beginnings in a small rural garage in Slovakia, initially producing leather falconry gloves, to a state-of-the-art workshop delivering a diverse range of premium leather holsters and everyday carry essentials to individuals, law enforcement agencies, and military units worldwide. Utilizing only the highest quality European and U.S. materials, FALCO maintains a steadfast commitment to quality while embracing a personalized approach to each product. Every item is designed and meticulously handcrafted in Slovakia. The village, nestled amidst the breathtaking Štiavnica Mountains, is rich with history and natural beauty and is recognized as a UNESCO World Heritage Site. FALCO’s skilled artisans exemplify precision and dedication, ensuring that each product meets discerning patrons’ exact specifications and preferences. Driven by a commitment to customer satisfaction, FALCO Holsters offers an extensive selection of customization options. Coupled with a lifetime warranty and expedited international FedEx shipping, this dedication guarantees unparalleled service and superior quality.



Posted in Holsters | Tagged , | Comments Off on FALCO® Holsters Now Custom-Fit for Over 3,100+ Handgun Models

EUROSATORY 2024: Lynred launches ATI640, easy-to-use VGA LWIR thermal imaging module for new market players in infrared

Lynred launches ATI640, easy-to-use VGA LWIR thermal imaging module for new market players in infrared

With offer of seamless IR assembly in any application, plug-and-play module makes thermal imaging more accessible to integrators of surveillance and defense, including drone systems
Lynred will exhibit ATI640, at Eurosatory, global event for defense and security, in Paris, France, June 17 – 21, 2024, at booth 5A-C155
Grenoble, France, June 18, 2024 – Lynred, a leading global provider of high-quality infrared sensors for the aerospace, defense and commercial markets, today announces the launch of ATI640, its plug-and-play, longwave infrared (LWIR) thermal imaging module with VGA resolution, for new market players seeking easier access to infrared (IR) technologies. With ATI640’s high image quality, reliability, user-friendly interface and seamless assembly, system developers can now integrate IR optronics without making a major investment or needing specialty knowledge in optical design, sensor calibration or image correction, which previously hindered wider adoption of IR technologies.
By stripping out the complexity in thermal imaging, Lynred’s ATI640 frees up the development time of system integrators, giving them more scope to focus on innovation and product quality, and thus increase their competitiveness with faster access to market.
ATI640’s plug-and-play solution makes infrared technology more accessible to new entrants in thermal imaging. In choosing this easy-to-use module, system integrators can speed-up their development of longwave infrared (LWIR) cameras and systems,” said Nadia Souhami, product unit director at Lynred. “ATI640 is the latest in a long line of thermal imaging innovations Lynred has brought to the market. We are excited about launching this module at Eurosatory and showing the power of its embedded image processing algorithms, while limiting the power consumption to just 1W. Our solution can bring smart thermal imaging with competitive advantages to any market application, drones in particular, which is a fast-growing market.”


Key product features
ATI640 is based on Lynred’s best-in-class, 640×480, 12µm pixel pitch sensor. It is designed with a SWaP-C (small Size, low Weight, low Power consumption, low Cost) core to optimize integration into optronic systems. The module is calibrated to work in shutterless mode to provide an uninterrupted video experience. Thanks to its shutterless operation and pairing with advanced image processing algorithms, ATI640 offers an excellent image quality with no trade-off on SWaP-C requirements. Its frame rate (60Hz) captures fast moving targets and produces smooth video footage. It is available with or without a lens.
Lynred will display ATI640, in conjunction with other new products, at
Eurosatory, booth 5A-C155, taking place in Paris, France, June 17 – 21, 2024.


About Lynred
Lynred, alongside its subsidiaries, Lynred USA and Lynred Asia-Pacific, is a global leader in designing and manufacturing high quality infrared technologies for aerospace, defense and commercial markets. It has a vast portfolio of infrared detectors that covers the entire electromagnetic spectrum from near to very far infrared. The Group’s products are at the center of multiple military programs and applications and are key components in many top brands in commercial thermal imaging equipment sold across Europe, Asia and North America. Lynred is the leading European manufacturer for IR detectors deployed in space.
www.lynred.com

Posted in Eurosatory, Thermal Imaging | Tagged , | Comments Off on EUROSATORY 2024: Lynred launches ATI640, easy-to-use VGA LWIR thermal imaging module for new market players in infrared

Wyoming Academy: Spots Available!

Bergara_home

Wyoming academy has a few recent openings.


FREE SHIPPING OVER $100

SHOP NOW


WE’RE HERE TO HELP

CUSTOMER SERVICE

BPI Outdoors 1270 Progress Center Ave Suite 100 Lawrenceville, GA 30043

Posted in Training | Tagged , , | Comments Off on Wyoming Academy: Spots Available!

SAF Files Federal Lawsuit Challenging Post Office Gun Ban

clip_image001

SAF FILES FEDERAL LAWSUIT CHALLENGING POST OFFICE GUN BAN

BELLEVUE, Wash. — June 18, 2024 — The Second Amendment Foundation (SAF) has filed a federal lawsuit in Texas challenging the ban on firearms carry in U.S. Post Offices and on postal property as violations of the Second Amendment, and is seeking declaratory and injunctive relief.

Joining SAF is the Firearms Policy Coalition and two private citizens, Gavin Pate and George Mandry, both Texas residents. Named as the sole defendant is Attorney General Merrick Garland, in his official capacity. The complaint was filed in U.S. District Court for the Northern District of Texas, Fort Worth Division.

Plaintiffs are represented by attorneys R. Brent Cooper and S. Hunter Walton at Cooper & Scully, P.C. in Dallas, and David H. Thompson and Peter A. Patterson at Cooper & Kirk in Washington, D.C.

“Under the Bruen ruling of June 2022,” noted SAF Founder and Executive Vice President Alan M. Gottlieb, “if the government seeks to restrict firearms in a particular location as a ‘sensitive place,’ it must prove that its current restriction is sufficiently analogous to a well-established and representative historical analogue.”

“Current federal law bars the ‘knowing possession’ of firearms in federal facilities, which includes post offices,” said SAF Executive Director Adam Kraut. “Millions of legally armed private citizens, whose daily routines may include visits to post offices to pick up or drop off mail, are directly impacted by this infringement. There is no well-established, representative historical analogue to justify this regulation, which violates the Second Amendment.”

For more information, visit saf.org. 

clip_image002

12500 NE 10th Pl
Bellevue, WA 98005
info@saf.org

Posted in Constitution | Tagged , , | Comments Off on SAF Files Federal Lawsuit Challenging Post Office Gun Ban

Pistol Braces Are Back In Stock

Braces are back in stock!

SIG SAUER Pistol Braces Are Back in Stock and Shipping Directly from Our Factory to You!

Upgrade your MCX or MPX pistol with our latest braces now back in stock.

Available in Black and Coyote Tan.

LEARN MORE AND BUY NOW

SIG SAUER Pistol Brace, Folding, Locking, Black

SIG SAUER Pistol Brace, Folding, Locking, Black

BUY NOW

SIG SAUER Pistol Brace, Folding, Locking, Coyote

SIG SAUER Pistol Brace, Folding, Locking, Coyote

BUY NOW

Also Available

300BLK Ammunition

300BLK Ammunition

Stock up on ammo for your MCX!

SHOP AMMO NOW

9MM Ammunition

9MM Ammunition

Stock up on ammo for your MPX!

SHOP MAGS NOW

MCX-RATTLER 5.56MM 5.5" Complete Upper Assembly

MCX-RATTLER 5.56MM 5.5″ Complete Upper Assembly

Convert any MIL-SPEC AR Lower into the MCX-RATTLER!

BUY NOW

MCX-RATTLER LT 300BLK 6.5" Complete Upper Assembly

MCX-RATTLER LT 300BLK 6.5″ Complete Upper Assembly

Compatible with all MCX-SPEAR LT parts. Advanced beyond any platform in its class.

BUY NOW

SIG SAUER MCX

SIG SAUER MCX

The MCX is a modular multi-caliber firearm platform designed to be easily adaptable to a wide range of configurations, calibers, and barrel lengths, which makes it particularly appealing for different types of operations and uses.

LEARN MORE AND SHOP ALL MODELS

SIG SAUER MPX

SIG SAUER MPX

The MPX is the ultimate 9mm sub gun platform. Every aspect of the firing system has been rigorously designed and tested. Featuring familiar AR controls, you can respond confidently and effectively, even under adverse conditions. The MPX also gives users the freedom to change barrel length and stock configuration, all while in the field.

LEARN MORE AND SHOP ALL MODELS

FIREARMS  • AMMUNITION  • ELECTRO-OPTICS  • SUPPRESSORS  • AIRGUNS  • TRAINING

SIG SAUER Inc.,

72 Pease Boulevard, Newington, NH 03801

(603) 610-3000

sigsauer.com

Posted in Accessories | Tagged , , | Comments Off on Pistol Braces Are Back In Stock

Eurosatory 2024: Avon Protection’s MCM100 Underwater Rebreather chosen by New Zealand Defense Force

Eurosatory 2024: Avon Protection’s MCM100 Underwater Rebreather chosen by New Zealand Defense Force
The order expands the MCM100’s deployment among NATO nations.

MELKSHAM, ENGLAND, June 17th, 2024: Avon Protection, the leader in innovative underwater and CBRN protective equipment, is pleased to announce that its MCM100 Multi-Role Rebreather has been selected by the New Zealand Defense Force to equip its navy divers. This significant contract includes the supply of MCM100 systems, spares and accessories, and a multi-year support program.

The MCM100 Multi-Role Rebreather provides unparalleled underwater capability for military divers.

Initially developed and deployed with global militaries and specialist user groups, the MCM100 delivers enhanced diver safety and extended mission duration for military divers across the spectrum of shallow and deep-water diving operations; including explosive ordinance disposal (EOD), mine-countermeasures (MCM), Special Forces, covert subsurface infiltration, submarine release & infiltration, and manned underwater vehicle operations.
The electronically controlled, closed-circuit MCM100 uses advanced digital oxygen sensors and a native decompression algorithm to manage the oxygen and decompression risk. System and mission information is fed to the diver via a wrist or console-mounted handset display and a heads-up display, maximizing system useability and allowing the user to focus on the mission rather than the equipment. Additionally, automated pre-dive sequencing reduces mission readiness time and enhances safety.
The MCM100’s modular design ensures a future-proofed capability for the underwater operator, providing users flexibility in how and when they integrate new technologies as they become available or as their mission envelope changes.
“In selecting the MCM100 Multi-Role Rebreather, the New Zealand Defense Force is equipping its military divers with world-leading technology to enhance the safety and effectiveness of their increasingly diverse operations,” said Kevin Gurr, Avon Protection’s Underwater Systems Director. “We look forward to working with the New Zealand Defense Force as this system enters service and we continue to support their operations over the coming years.”
New Zealand joins a user community that includes other key NATO nations and partner navies.

Avon Protection is exhibiting at Eurosatory 2024 in Hall 5a – stand H293.

ABOUT AVON PROTECTION
For military and first responders, Avon Protection, part of the
Avon Protection plc group, is the go-to for mission-critical protection that instils mission-critical confidence. As the most field-tested equipment in the industry, we have the real-world insight to innovate and stay steps ahead of ever-evolving threats.
Our extensive history of providing protection and comprehensive knowledge of our customers’ requirements, allows our range of respirators, powered and supplied air, underwater systems and CBRN protective wear to protect over 4-million users worldwide.
Through meticulous design, thoughtful integration, and a relentless pursuit of performance excellence, we ensure the safety of our users across their entire ensemble. We offer the convenience of acquiring all their equipment from a single supplier, while instilling confidence from the Avon Protection brand they know and trust. We assure our protectors so they can complete the mission and come home safely, every time.
For further information, please visit
www.avon-protection.com.


Marontech TWB ltd

278 Northfield Avenue

Ealing, London W5 4UB

United Kingdom

Posted in Eurosatory, Gear | Tagged , | Comments Off on Eurosatory 2024: Avon Protection’s MCM100 Underwater Rebreather chosen by New Zealand Defense Force