Benchmade Knife Company 300 Beavercreek Road Oregon City, Oregon 97045

It is Summer Sweet Heat Corn Time
With Hi Mountain Seasonings
RIVERTON, Wyo. (July 29, 2024) — It’s that time of year to enjoy fresh, sweet corn on the cob. What is the best way to prepare corn on the cob? With Hi Mountain Seasonings, of course. Hi Mountain Seasonings South of the Border recipe offers a mouthwatering twist on traditional corn on the cob that brings a delicious blend of a little sweetness with a bit of heat, making your tastebuds dance with pleasure,
Corn on the cob is plentiful this time of year, but it is essential to pick and store correctly. When selecting your ears of corn, pick green husks, fresh silks, and tight rows of kernels. Store the corn in the husk in plastic wrap or a plastic bag in the refrigerator until you are ready to cook. For the tastiest, sweetest results, cook and serve the corn on the cob within 1-2 days.
Corn on the cob is a tasty treat this time of year and should be enjoyed regularly. According to the USDA, Americans should eat half their plate with vegetables and fruits daily. Hi, Mountain Seasonings South of the Border Corn on the Cob not only makes it easy for you and your family to maintain your daily vegetable intake but also provides a healthy and delicious option.
“One medium corn on the cob contains 100 calories, 1 g fat, 23.5 g carbohydrates, 3.5 g sugar, 2.5 g fiber, 0 mg sodium, 3.5 g protein, and 212 mg potassium,” said Hans Hummel, Hi Mountain Seasonings owner. “So, head to the market, grab some ears, and get to shucking.”

South of the Border Corn on the Cob
Ingredients:
• Plan on 1 to 2 ears of corn per person.
• The seasoning blend in this recipe will season 6 ears of corn. Adjust accordingly.
• 1/2 cup chopped cilantro
• 1 stick of butter
• 1 1/2 Tablespoons Hi Mountain Chili Seasoning
• 1 1/2 Tablespoons Hi Mountain Black Pepper & Brown Sugar Bacon Seasoning
• 1 teaspoon of salt
Directions:
1. Mix the dry seasonings in a small bowl.
2. Boil ears of corn for about 10-15 minutes. Using tongs, remove from the pot to a platter. Pat corn with paper towels to remove excess water.
3. Spread a generous amount of butter on each ear of corn, using at least one-quarter-inch thick slices for each ear of corn.
4. Season each ear of corn all over with dry seasoning. Stack on a platter, garnish with cilantro, and serve.
Hi Mountain Seasonings offers a wide range of free recipes on its website, www.himtnjerky.com, to inspire home cooks. These recipes showcase the versatility of their products and provide step-by-step instructions for creating mouth-watering dishes. Whether you’re a seasoned chef or a novice in the kitchen, Hi Mountain Seasonings has something for everyone.
For more information about Hi Mountain Seasonings and their South of the Border Corn on the Cob recipe, please visit www.himtnjerky.com.
About Hi Mountain Seasonings: Located in the heart of Wyoming, Hi Mountain Seasonings was founded in 1991 and is America’s premier manufacturer of homemade jerky and sausage kits. Hi Mountain Seasonings, has successfully captured distinct, traditional Western flavors in its jerky cure & seasonings, Western-style seasonings, bacon cures, snackin’ stick kits, dressings & dips, and much, much more. The company also offers field dressing and prep and cooking tools. For additional information, write: Hi Mountain Seasonings, 1000 College View Drive, Riverton, WY 82501; call toll-free 1-800-829-2285; or visit the company website at www.himtnjerky.com.
.

Need more info? Call 305-900-6841
Office Open: Mo-Fr 7:00am to 1:00am EST
Sa-Su 11:00am to 8:00pm EST
salesusa@atncorp.com
©2023 ATN corp. | 2400 NW 95 Ave, Doral, FL 33172, United States



Take a Kid Hunting!
Developing a new and strong contingent of hunters and outdoor enthusiasts is critical for the active conservation and restoration of wild lands.
MUSKEGON, Mich. (July 29, 2024) – Living the outdoor lifestyle is something many Americans dedicate themselves to at an early age. While there are several ways to enjoy the outdoors, hunting certainly ranks up there when it comes to time in the field.
Over the past 40 years or so, hunter recruitment levels have dropped, and interest began to wane when among other reasons, the majority of the population shifted to a less rural lifestyle. The discontent with the countryside and less interest in hunting made it more difficult for experienced hunters to pass the tradition and heritage of hunting to the next generation.

Thankfully, as soon as it was apparent trouble was on the horizon, the outdoor industry, conservation organizations and fish and wildlife agencies sounded the alarm, and major steps were taken to reverse the trend. Enter the R3 Initiative, which stands for Recruitment, Retention and Reactivation.
According to the Council to Advance Hunting and The Shooting Sports, “R3” is a nationwide movement focusing on strategically increasing and diversifying participation in and support for shooting sports, hunting, and angling. On the hunting and shooting sports side, this movement started as a result of a noticeable decline in hunting and shooting sports participation starting in the 1980s. The decline in those activities, which sustain a multi-billion-dollar industry and provide the primary financial support for state-level wildlife conservation in the United States, posed a threat to wildlife conservation. In addition to hunting and shooting sports importance to conservation, these activities have also been integral to the American way of life and our culture as it has developed in our society having numerous benefits to those that participate.
The R3 movement has continually evolved since its inception. It has become much more than a program and being integrated into many state and federal agencies, nonprofits, and industry organizations as part of how they do business. The R3 efforts around the country are much more encompassing than just the traditional “learn-to-hunt” programs. Current efforts strive to improve property and information access, reduce regulation complexity, and diversify our participant base, just to name a few. The long-term goal of much of the movement is to provide improved support and experiences for existing participants, ensure that new participants are introduced from all different backgrounds, and ensure that hunting, shooting sports, and angling are seen as relevant throughout all segments of society regardless of the percentage of the population that participates.

Through these efforts it has never been easier for non-hunting adults and youths to participate in hunting opportunities by way of dozens of states offerings and special designated youth seasons for game such as wild turkey, deer and waterfowl. In addition, low-cost licensing options with fewer initial requirements such as Hunter Safety for mentored hunters in general.
In addition, many public properties organize special youth outings and other education and orientation programs designed to streamline the process of becoming a hunter. Some state properties may even offer Free Youth Hunting Days.
Adults just getting into the sport are often referred to “late-onset hunters” and regularly lament the fact they weren’t exposed to hunting at an earlier age. It should be no surprise, because in the past, young hunters were primarily dependent on relatives and peers to show them the ropes. Unfortunately, that didn’t always happen.
Developing a strong contingent of hunters and other outdoor enthusiasts will become increasingly critical for the active conservation and restoration of wild lands. Moreover, it’s extremely important for hunters to maintain a strong foothold in society to stave off attempts to limit or cancel a multitude of hunting opportunities (which has happened in other countries) so critical to effective wildlife management, as well as providing a conduit for vital excise tax funds such as those designated by the Pittman-Robertson Wildlife Restoration Act.

Mentoring youth hunters early improves the odds some will eventually become good stewards of the outdoors and the environment in general – once they are capable of legally hunting on their own. Youth hunting seasons often occur prior to regular season openers, during “splits” between regular seasons, and in some cases after regular seasons have ended. Wildly successful, age restricted youth hunting seasons regularly offer a shot at unpressured game that may otherwise be much more difficult to hunt, and while adults are required by law to be present in most cases, they are not allowed to attempt to harvest game.
Success in the field shouldn’t be strictly measured by tagging a buck or longbeard or hoisting a hefty strap of mallards. Perhaps this is one of the more important aspects of taking youths hunting; while harvesting game is certainly the goal, spending a day in the field and observing nature in all it’s glory – away from electronic devices and other distractions – is something younger generations are often critically lacking.
Youth hunting seasons, economical license options, and the R3 Initiative have made a big difference, and each new generation of hunters will benefit tremendously from these endeavors. There is another upside to this: While many older hunters were forced to wear worn-out hand-me-down clothing when they were starting out as youngsters, today’s youths have the added advantage of plentiful gear options specifically designed for smaller statured hunters. Thankfully, blue jeans and leaky jackets are no longer standard uniform.
There are even high-tech options such as ScentLok jackets and pants that will not only fit youth hunters perfectly, but also afford them the very same comfort and scent protection their mentors have.


ABOUT NEXUS OUTDOORS
Nexus Outdoors, headquartered in Muskegon, MI, USA, is a leading worldwide designer, marketer and distributor of performance, hunting and casual odor-controlling apparel, footwear and equipment under the ScentLok Technologies®, OZ®, Blocker Outdoors®, Whitewater and Tree Spider® brands. It also owns American Range Systems, manufacturer and distributor of the world’s strongest and safest bullet traps. Nexus Outdoors is the only company with access to all scent-controlling technologies, including their patented Carbon Alloy™ and Cold Fusion Catalyst™ technologies, which provide superior success in the field. ScentLok and Blocker Outdoors are pioneers in the hunting industry, which many credit with creating a market focused on superior scent control to get closer to big game.
Zero Creep Technology™
What makes TriggerTech’s Zero Creep Technology™ so revolutionary? It all comes down to our patented, free-floating roller system, which eliminates the sliding friction that is found in traditional triggers. This innovation results in a crisp, clean break that enhances accuracy and control in every TriggerTech trigger.
Benefits of Zero Creep Technology™
Improved Accuracy and Precision: By eliminating creep (the distance the trigger lever must travel before releasing the sear), our triggers ensure a consistent, crisp trigger break with every shot. This leads to improved shot placement, enhancing your overall shooting performance.
Exceptional Break: Our triggers break like a glass rod. The Dvorak TriggerScan™ System, a computer-controlled, motorized instrument specifically designed to test trigger mechanisms, provides empirical evidence of this zero-creep release. This patented technology sets a new standard in trigger quality evaluation, ensuring that our triggers deliver unparalleled performance.
Reliability and Safety: Designed to operate in the harshest environments, our housings minimize contamination. The free-floating roller keeps the engagement area clean and maintains its original break characteristics. Our triggers do not rely on polishing or reducing key engagement areas to enhance performance – no trade-off for performance over safety.
Longer Service Life: Zero Creep Technology™, along with hardened 440C stainless steel internal components, ensure corrosion resistance and an extended service life. Your trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
Dvorak Scan of Top Competitor Trigger Performance
This Dvorak Trigger scan shows TriggerTech’s Adaptable AR15 Trigger set at 2.25 lbs. against 4 leading friction-based, aftermarket AR15 triggers. These scans highlight what you feel when you shoot a TriggerTech. There is no comparison.
TriggerTech · 2440 Tedlo Street · Mississauga, ON L5A 3V3 · Canada
Ops-Core® AMP Communication Headset – Amphenol Downlead
Starting at $788.35!
For optimal flexibility and mission performance, this ergonomically designed headset can be easily configured to meet a wide range of mission needs while providing optimal comfort and a streamlined profile, with options for headband or helmet rail-mounted use, single or double hearing protection.
TNVC-DISCO32 DISCUS
Special Price: $249.00
Although the DISCUS can function independently, it can also be used in combination with radios utilizing U94/A push-to-talks (PTTs). The DISCUS plugs into the PTT as an in-line component, allowing for radio communications to pass through it, as well as allowing for simultaneous audio/communication from cellphone and radio.
OTHER COMMS ACCESSORIES ON SALE
Ops-Core® AMP Downlead Cable U174 (MONO-BINAURAL)
Starting at $169.39
Ops-Core® AMP Helmet Rail Mount Kit (Arms Only)
Starting at $135.49

Tactical Night Vision Company 25612 Barton Road Loma Linda, CA 92354-3110 USA
_2857669.png)

The 2024 Future Force Capabilities Conference and Exhibition is guaranteed to foster creative interdisciplinary conversation and cutting-edge collaboration opportunities.
This year, attendees will have the opportunity to hear from Sandy Long, Senior Advisor for Defense Exports within the Office of the Deputy Assistant Secretary of the Army for Defense Exports and Cooperation (DASA DE&C).
Long will open Wednesday’s sessions at the 2024 Future Force Capabilities Conference & Exhibition, held September 24 – 27, 2024 in Virginia Beach, VA.
Sandy Long’s extensive career with DASA DE&C has helped shape the office through her service as Director of both the Resource and Policy Directorate and the Strategic Planning Directorate. She spearheaded the creation and implementation of career development initiatives for the Foreign Military Sales (FMS) workforce and has overseen the financial management of the Army’s FMS budget and Program Objective Memorandum (POM).
Join Sandy Long, 800+ thought-leaders, and 50+ exhibitors by registering today!

Exhibit and Sponsorship Opportunities
Secure your exhibit space today by visiting the exhibits website and then selecting “buy a booth.” Don’t miss the chance to showcase your products in front of the Armaments, Fuze, Integrated Precision Warfare, Munitions, and Robotics Communities.
Sponsorship opportunities are also available! Take advantage of the various exposure options designed to enhance your brand visibility and engagement.
Below are a few highlighted opportunities. For a complete list, please visit our sponsorship website.
Premier – $15,000 Exclusive
Showcase your brand as the leading sponsor with exclusive and customized recognition! This package includes branded notebooks distributed to attendees, floor decals & more.
Registration & Lanyards – $12,000 Exclusive
Be the first to welcome attendees as they arrive onsite. Your logo will also be prominently featured on their pre-registration confirmation emails.
Questions or have an idea that is not listed? Reach out to Sarah O’Hanley at sohanley@NDIA.org.
Live Fire Demonstration
This year’s Live Fire Demo will take place on Friday, September 27, at the Bear Swamp. All conference registrants will have the opportunity to attend at no additional fee. An optional, low-cost transportation add-on is available in the registration process for those wishing to take the conference bus to the demo.
If your company is interested in demoing, please download and complete the application from the demo website and submit to Allison H. Carpenter at ahcarpenter@NDIA.org.
_2861121.png)
![]()
Date
September 24 – 27, 2024
![]()
Location
Virginia Beach Convention Center
1000 19th Street
Virginia Beach, VA 23451
![]()
Contact
Andrew Peters
Associate Director, Meetings
(703) 247-2572
apeters@NDIA.org
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
The Competition Optic You’ve Been Waiting For is Here
The ROMEO3MAX-PRO: Fits Most Full-Size Pistols
Designed in collaboration with Team SIG Captain and 7-time World Speed Shooting Champion, Max Michel, the next generation of SIG SAUER’S competition-ready pistol reflex sight is here. The ROMEO3MAX-PRO is the embodiment of a lifetime of repetition and experience in the competitive environment, refined over tens of thousands of rounds to deliver the most dominant optic to date.
LEARN MORE ABOUT THE ROMEO3MAX-PRO AND BUY NOW
What’s New in the ROMEO3MAX-PRO?
★ Industry standard DeltaPoint™ Pro footprint for direct mount (previous version had a proprietary footprint and required an adapter plate)
★ Direct-mount ability and a new lower deck height allow for a more optimal height over bore axis and allows you to co-witness with suppressor height sights
★ 3 additional brightness settings for finer brightness adjustments in varying lighting conditions
★ A new 8 MOA dot (previously 6 MOA) allows even faster reticle acquisition, and allows the shooter to run the dot at a lower brightness, helping to reduce reticle distortion and flare, especially to those with astigmatism
★ Slotted screws for windage/elevation adjustments and battery tray – no more losing a tiny Allen wrench at the range
★ Brightness button re-configuration to the industry standard (UP is now at the front, DOWN is at the back)
★ Lens size increased to 31mm from 30mm
★ The included MAGNETAC rubber optic cover automatically turns the reticle off when installed, so you can preserve battery life between match stages, or when storing the optic
Available in either a 3 or 8 MOA red dot with 15 total illumination intervals, the ROMEO3MAX-PRO gives you the ability to fine tune brightness settings for any environment. Featuring an IPX-7 waterproof rating and 20,000-hour runtime, the ROMEO3MAX-PRO is backed by SIG SAUER’S Infinite Guarantee™.
VIDEO: Max Michel and the ROMEO3MAX-PRO Red Dot Sight
Team SIG Captain Max Michel walks you through the new features of the ROMEO3MAX-PRO red dot dight.
WATCH THE VIDEO NOW
LEARN MORE ABOUT THE ROMEO3MAX-PRO AND BUY NOW

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING
SIG SAUER Inc.,
72 Pease Boulevard, Newington, NH 03801
(603) 610-3000
sigsauer.com
Leupold and Gunwerks have teamed up to deliver The Accountant, a limited-edition rifle system that embodies discretion and power. Designed to fit securely in a briefcase, this integrally suppressed, compact, take-down rifle system featuring the Mark 5HD 2-10 allows you to be decisive anywhere without drawing unwanted attention.
FEATURING THE MARK 5HD
This mid-range scope is as bomb-proof as it gets, but it’s also incredibly lightweight and accurate. With its first focal plane reticle, 2-10 magnification range, and side focus, engaging in close-quarters combat is just as easy as identifying threats from a distance.
LIMITED-RUN AVAILABLE NOW THROUGH GUNWERKS
For those who demand precision and discretion in a compact package, The Accountant by Gunwerks and Leupold is the ultimate choice. This rifle system is a testament to innovative design and superior craftsmanship, offering unmatched performance and portability.
Whether you’re in the field or on the move, The Accountant ensures you’re always ready to reconcile anywhere.

CUSTOMER SERVICE
Troubleshooting | Returns & Warranty
1-800-LEUPOLD

Leupold & Stevens, Inc., 14400 NW Greenbrier Parkway, Beaverton, OR 97006-5790, United States

NOW IN STOCK: Parts & Accessories for Your SIG MCX
Choose from a wide selection of our most popular MCX products such as the all-new Minimalist Plus Multicam Folding Stock, FOXTROT-MSR rifle lights, ROMEO4T-PRO Mil-Spec Red Dot Sight and much more.

NEW: MCX/MPX Minimalist Plus Locking Folding Multicam Stock
SIG SAUER factory aluminum locking minimalist plus, folding stock installs easily on your MCX/MPX via the receiver’s 1913/Picatinny interface. Featuring a traditional stock buttpad height of 4.5″
★ Overall length – 9″
★ Overall height – 4.5″
★ Butt-pad width – .9″
★ Weight – 12.3oz
LEARN MORE AND BUY NOW SHOP ALL STOCKS & BRACES
ROMEO4T-PRO Mil-Spec Red Dot Sight
The ROMEO4T-PRO offers the same high-end optical performance, quad-reticle, and legendary durability as the original ROMEO4T while adding key features requested by professionals. Illumination control moves to the top, providing easy access with either hand while staying clear of chest rigs and plate carriers when slung. A dedicated night vision override switch makes short work of drastic changes in lighting conditions and by combining MOTAC with a common CR2032 battery, the ROMEO4T-PRO is rated for 50,000 hours of runtime.
Available in Black and FDE.
FOXTROT-MSR: Power Meets Versatility
Expanding upon the growing lineup of SIG SAUER’S FOXTROT tactical lights, the new FOXTROT-MSR provides 1,350 Lumens and 33,000 Candela in a sleek 6061 aluminum housing that has been optimized for personal defense platforms.
Featuring a remote tape switch with SureFire® compatible plug, the FOXTROT-MSR offers an integrated push-button activation with momentary and latching modes. The Full Size FOXTROT-MSR has up to 1.5 hours of runtime on a single rechargeable 18650 battery and the Compact FOXTROT-MSR has up to 1 hour of runtime on a single 18350 rechargeable battery. Both versions come with two rechargeable batteries.
Allowing for versatile mounting options, the FOXTROT-MSR is compatible with Scout Mount™ and ships with both Picatinny and M-Lok™ mounting interfaces.
Available in Compact and Full Size Models.
TANGO-MSR LPVO 1-6X24MM (SFP) Riflescope
• Industry-leading light transmission and optical clarity for any situation
• High-performance optical system with low dispersion glass
• Integrated thread in throw leaver for quick magnification changes
• Illuminated MSR reticles with 11x brightness levels
• Includes ALPHA-MSR 1 piece aluminum cantilever mount
SPEC1 Combo Kit
Premium non-toxic, non-hazardous bore cleaner, cleaner/degreaser, and lubricant.
Rifle Slings
Available for the MCX and MPX from Blue Force Gear, Grovetec and more.
Vertical Grips & Handstops
Choose from multiple options including
M-LOK compatible grips and barricade stops.
Rifle Uppers
Convert your AR-15 into the MCX-SPEAR LT or MCX-Rattler quickly and easily.

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING
Bond Arms® Unveils the XLV (45): A Tribute to “The Living Legend”
![]()

Granbury, TX (July 26, 2024) — Bond Arms®, a leading innovator in the firearms industry, is proud to announce the launch of the Bond Arms XLV (45), a powerful and tough handgun designed to honor the 45th President of the United States. This limited edition firearm exemplifies the incredible determination and resolve of “The Living Legend,” making it a must-have for collectors and enthusiasts alike.
Bond Arms, a 30-year-old Texas company, has created the XLV (45) as a tribute to our 45th president, reflecting his toughness and resilience. This extremely powerful and tough handgun honors “The Living Legend” and his remarkable strength and resilience. With its unique flat-sided barrel featuring detailed lasering on the right side and a blank left side for personalization, the XLV (45) is a functional firearm and a customizable piece of history.
The XLV (45) also features Bond Arms’ new B6 grip, making it comfortable to shoot. Priced at just $545.47, this handgun offers exceptional value for a limited edition firearm.
The Bond Arms XLV (45) is now available for pre-order. Quantities are limited, so act NOW to secure this collectible piece.
For more information please check out
https://www.bondarms.com/XLV-45-P8617.aspx#descPane.
XLV (45) Features:
![]()
BOND ARMS, INC. is located in Granbury, Texas, and manufactures the award-winning Bond Arms Derringer – the finest in double barrel protection. Originally organized under the name Texas Armory, the company became incorporated as Bond Arms in 1995 with the idea that the Remington Model 95 over-under, single-action derringer could be converted from an Old West anachronism into a modern & reliable handgun. The barrel and frame were redesigned to safely fire modern calibers & the entire handgun is constructed entirely from stainless steel. This makes for a pistol that’s both strong and durable.
For more information, please visit WWW.BONDARMS.COM
Introducing the new TREK-22 Rifle!
Pre-Order now and receive $50.00 off.
Shipping Begins September 2024
Preorders are now open for Desert Tech’s new 10/22 rifle, the highly anticipated Trek-22 Rifle! This compact and lightweight rifle brings unparalleled performance to the .22LR platform.
NEW RIFLE FEATURES

Suppressor Ready
1/2×28″ Threads

Improved Trigger
Straight Blade Design
2.25 lbs. pull weight
Other Key Features:
Special Pre-Order Offer:
Pre-Order Now!
MSRP: $799.99 $749.99
TREK-22 Rifle – ODG
Pre-Order Now!
MSRP: $799.99 $749.99
TREK-22 Rifle – GRY
Pre-Order Now!
MSRP: $799.99 $749.99
TREK-22 Rifle – FDE
Go to Deserttech.com to take the next step in your Shooting evolution.
Desert Tech | 801.975.7272 | sales@deserttech.com | deserttech.com
Desert Tech | P.O. Box 65816 | Salt Lake City, UT 84165 US
͏
Featured Optics
C&H LPVO
(Low Power Variable Optic)
Crafted with a robust 30mm tube and equipped with mil-spec reticle, elevation, and windage adjustments, “The LPVO” ensures uncompromising accuracy and reliability in any environment. Engineered to endure the rigors of battle, this optic is field proven and battle-tough, promising consistent performance when it matters most.
LVPO Features
Get the premium features you’d expect from the top scopes on the market without breaking the bank.
C&H ERD-1
Red Dot for Rifles
Tailored for hunters, competitors, and agencies alike, this game-changing optic offers unparalleled precision and durability for every shooting scenario.
Equipped with 10 levels of brightness and night vision compatibility at levels 1 and 2, the ERD-1 ensures optimal visibility in any lighting condition. Its motion control feature allows for instant activation with a simple shake, while smart power management conserves battery life by automatically powering off after 5 minutes of inactivity.
Experience the pinnacle of precision and durability with the ERD-1 from C+H Precision – where innovation meets performance, setting new standards in rifle optics.
Looking for Something Different?
Shop by category
C&H Precision © 2024 All rights reserved.
459 Edsel Dr, Richmond Hill, GA 31324
RIFLE PARTS // PISTOL PARTS // APPAREL
Introducing the Strike Single Folder – Stock Edition.
You may already be familiar with our Strike FSA Dual, a modular folding arm solution that can fold to the left and the right with interchangeable stock and stabilizer end pieces. While the new Stock Single Folder still utilizes the same arm and stock end piece as our Dual Folder it has a strengthened hinge made of steel, instead of aluminum, making it extremely robust. The fitment is also perfect with little to no play when extended and folded. This folder only folds to a single side but can do so at any time without reconfiguring or using a button.
Simply lift up on the arm and fold to the left
PRODUCT FEATURES:
-Pre-assembled folding stock w/ optional add-ons for addition stock/stabilizer ends
-Extremely positive and strong lock
-Quick deployment
-Mounts directly to 1913 Picatinny rails with M5 screw and locking plate
-2 QD sling points
-Folds single side anytime without any reconfiguring hinge or button
-Adds 8.66” (219.9mm) to overall weapon length in operating position
-Adds 0.8” (20.30mm) to overall weapon length in folded position
-SI custom high-strength polymer stock/stabilizer ends
-Compatible with FSA Cheek Riser (sold separately)
At the 3 and 9 o’clock positions there are two QD points located on the stock end piece for attaching your favorite sling.
Be sure to pick up our adjustable FSA Cheek Riser to make your shooting experience more comfortable
Our FSA Single Stabilizer is also back in stock!
Strike Industries has teamed up with ARMASPEC for a huge Giveaway valued at over $3k in prizes!
Don’t miss out!!
Strike Industries · P.O. Box 28137 · Santa Ana, California 92799 · USA
G-Code Tactical 272 W stag pk service Rd, Burgaw, North Carolina 28425
We are excited to announce the arrival of our latest FN 15 upper assemblies at FN America eStore. Elevate your FN 15 experience with our new FN 15 DMR3, M4, M16, and TAC3 upper assemblies, designed for precision, reliability, and performance. Explore these high-quality accessories and upgrade your FN 15 today!
Shop now at fnestore.com
FN eStore 5651 State Road 93 Eau Claire, Wisconsin 54701
Everything you need to know about NRL at your fingertips. ͏

Remington 2592 Arkansas Hwy 15 N Lonoke, AR – Arkansas 72086

IN STOCK NOW!
Desert Tech 6.5 Creedmoor Premium Match 20 Round Box
MSRP: $43.99 $34.99
IN STOCK NOW!
Desert Tech 6.5 Creedmoor Premium Match 400 Round Case
MSRP: $874.99 $699.80
IN STOCK NOW!
Desert Tech .308 Winchester Premium Match 20 Round Box
MSRP: $41.99 $34.99
IN STOCK NOW!
Desert Tech .308 Winchester Premium Match 400 Round Case
MSRP: $834.99 $699.80

Go to Deserttech.com to take the next step in your Shooting evolution.
Desert Tech | 801.975.7272 | sales@deserttech.com | deserttech.com
Desert Tech | P.O. Box 65816 | Salt Lake City, UT 84165 US
![]()
*INITIAL ROUNDS OF OPENINGS FILLED. FOURTH ROUND NOW OPEN.*
SELL STRIKEMAN AT YOUR LOCAL GUN SHOWS & MAKE UP TO $10K/MONTH
We’re growing our gun show teams across the USA to get booths in every gun show across the States, and we want you to be part of it. We have vendors that are earning up to $10k+ per month selling our products at gun shows with minimal start-up cost.
At Strikeman USA, Inc., the gun show division is the secondary channel that drives consumer reach of our products that are not captured by our primary channel of online sales.
We are seeking a select few qualified sales representatives who can grow this channel with their own sales skills. We are looking for quick learners who can learn our product and can successfully sell it at gun shows. Candidates would travel to gun shows and set up a booth and sell Strikeman’s brand of products.
OBJECTIVES:
PAY STRUCTURE:
Receive substantial profit margin on products, with Net 30 terms to alleviate any upfront capital investment.
Strikeman USA, Inc. 222 E 14th Street Cincinnati, OH 45202

Personal Defense Punch
When you’re looking for personalized protection, choose ammunition built specifically for defense. Available now!
Personal Defense Punch
Personal Defense Punch
Personal Defense Punch
Personal Defense Punch
Federal 900 Bob Ehlen Drive Building 17 Anoka, MN – Minnesota 55303

Pistol Stabilizing Braces Are Back and Now Shipping on the New M400-TREAD Pistol and M400-SDI X Pistol
In a major win against administrative agency actions, a Federal Court in Texas recently ruled the ATF’s pistol brace rule violated the Administrative Procedures Act’s procedural requirements, vacating the Final Rule as invalid. As a result, pistol stabilizing braces are once again shipping with many pistol variants of SIG SAUER rifles, including the new M400-TREAD Pistol and the M400-SDI X Pistol.
NEW: M400-TREAD Pistol
The new M400-TREAD Pistol brings increased performance and capability to one of our most popular rifles.
Features:
★ Free floating M-LOK-enhanced alloy handguard
★ 2-Stage flat blade match trigger
★ 11.5” cold hammer forged steel barrel
★ Low-profile gas block with carbine length gas system
★ Ambidextrous safety
★ Magpul BSL telescoping brace
WATCH THE VIDEO NOW
NEW: M400-SDI X Pistol
Designed from the ground up to deliver maximum performance and reliability.
Features:
★ Ambi bolt catch/release, safety, charging handle, & mag catch
★ Low-profile gas block with carbine length gas system
★ 2-Stage flat blade match trigger
★ 11.5” cold hammer forged steel barrel
★ Free floating M-LOK alloy handguard
★ Hybrid compensator/flash hider
★ Magpul BSL telescoping brace
BLOG: Federal Court Rules That Pistol Stabilizing Braces Are Now Legal
Adam Kraut, Executive Director, Second Amendment Foundation, explains how a Texas Federal Court has ruled that pistol stabilizing braces are now legal.
Shop Pistol Stabilizing Braces
SIG SAUER Pistol Brace, Folding, Locking, Black
SIG SAUER Pistol Brace, Folding, Locking, Coyote

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING
SIG SAUER Inc.,
72 Pease Boulevard, Newington, NH 03801
(603) 610-3000
sigsauer.com

Max Michel and Mason Lane Take Top Finishes at SIG SAUER Academy USPSA Area 7 Match
NEWINGTON, N.H., (July 25, 2024) – SIG SAUER, Inc. congratulates Team SIG Captain Max Michel and Team SIG professional shooter Mason Lane on their first-place finishes at the 2024 USPSA Area 7 Match hosted at SIG SAUER Academy. Max earned the top prize for the Carry-Optics Division and first overall; Mason earned the top prize for the Production Division and third place overall.

Max Michel competing at the SIG SAUER Academy USPSA Area 7 Match.
“The atmosphere at the Academy for the Area 7 match was electric and for Max and Mason to each come away with first place divisional finishes and first and third overall is impressive. These results reflect hard work and dedication to their sport,” said Robby Johnson, Chief Marketing Officer, SIG SAUER, Inc. “I also want to recognize the team at SIG SAUER Academy on their collective achievement. This competition had the largest attendance of an Area 7 match ever and has garnered amazing positive feedback from both competitors and spectators. It takes many forces coming together to make a match like this happen and the Academy team makes it look easy to prove they are the best in the industry.”
At the USPSA Area 7 Championship, Max earned his first-place finish in the Carry-Optics Division and the first-place overall finish for the match using a P320-MAX pistol with a ROMEO3MAX Optic and SIG SAUER Match Elite competition ammunition.
Max Michel, Team SIG Captain added, “I’m thrilled to have won the Carry-Optics title and the overall title at the Area 7 competition. SIG SAUER Academy hosted an incredible event with a huge crowd and amazing stages. The biggest victory of the weekend goes to the staff and the entire team that put this match on the ground, they did a spectacular job showcasing the facility and what it means to be a part of Team SIG to the world.”

Mason Lane competing at the SIG SAUER Academy USPSA Area 7 Match.
At the USPSA Area 7 Match, Mason earned his first-place finish in the Production Division and the third place overall finish for the match using a P320-XFIVE LEGION with iron sights and SIG SAUER Match Elite competition ammunition .
“This match stands as a historical full circle moment in time for me, as the first major USPSA match I ever competed in was this Area 7 match at SIG SAUER Academy in 2013. I can remember watching Max and admiring how easy he made it look and wanting to be on that stage someday,” said Mason Lane. “Fast forward to 2024 and seeing the transformation of SIG SAUER Academy on display at this match, being afforded the opportunity to represent the best firearms company, and having a podium finish was truly unbelievable and I am so honored to be part of Team SIG.”
The 2024 USPSA Area 7 Match at SIG SAUER Academy, in Epping, New Hampshire took place July 19 – 21, 2024 and hosted over four-hundred competitors. To learn more about the SIG SAUER Academy and SIG Experience Center league and match schedule visit sigsaueracademy.com.
About SIG SAUER, Inc.
SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: sigsauer.com.

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING

VORTEX® LAUNCHES CUSTOM TURRETS FOR RAZOR® HD LHT™ AND NEW VIPER® HD RIFLESCOPES
July 25, 2024
RANGE. DIAL. HOLD DEAD ON. NEW PRECISION UPGRADE FOR HUNTERS SIMPLIFIES LONGER SHOTS.
BARNEVELD, Wis. – Advancing precision and ease of use for hunters, Vortex® unveils custom turrets as a new option for its Razor® HD LHT™ and new Viper ® HD models. These custom engraved turrets allow for rapid adjustments and holding dead on target—at any range—without the need for complex calculations.
Visit the new Vortex® Custom Turrets webpage now.
Designed to be matched with your specific ammunition, rifle setup, and shooting conditions, Vortex® Custom Turrets streamline and simplify the long-range shooting process. Simply range your target, adjust the turret to the corresponding distance, and engage with confidence.
“The introduction of custom turrets reflects our commitment to customer-focused solutions,” says Vortex® CEO Joe Hamilton. “We’re always looking for ways to improve the shooting experience. With these custom turrets, we’re providing customers the precision of a tailored fit for their specific needs, directly enhancing their accuracy and success in the field.”
Vortex® is launching its custom turret service with options for Razor® HD LHT™ and new Viper® HD riflescopes to start, aiming to expand this offering to additional models in the future. Starting soon the Razor® HD LHT™ and new Viper® HD models will come with a coupon inside the box that customers can redeem for a FREE custom turret upgrade.
Click here to see Vortex’s new custom turret webpage. There you can watch a video to learn how easy it is to create and use custom turrets.
For a detailed list of technical specifications, frequently asked questions, and high-resolution images, check out the Vortex® New Product Portal.
About Vortex®:
Your desire to be your best fuels our promise to provide nothing short of exceptional performance, unmatched service, and memorable experiences. The way we see it, your success is our success. Welcome to Vortex Nation™.
Vortex Optics
1 Vortex Drive, Barneveld, WI, 53507
Magnetic Molded Tray
$25.00
Pouch Bench Block
$18.50



Fix It Sticks 4001 N. Ravenswood Chicago, IL 60613
G-Code Tactical 272 W stag pk service Rd, Burgaw, North Carolina 28425
Back in Stock!
⅝x24 M2 Brake is back in stock!
The 5/8×24 M2 Brake is designed to handle projectiles with a diameter of up to .460.
The M2 Brake is ideal for rifles, along with lever guns and pistol caliber carbines with the Alaskan360™ series or Obsidian9/45 with the Obsidian Dual Taper Mount.
PARAGON Members – sign in for 50% off
and don’t forget to click FREE Shipping!
Looking for Information on Accessories? Check Out Our “The More You Know” Videos

Rugged Suppressors 1 Tungsten Trail Travelers Rest, SC 29690 USA

FAA Safety Team | Safer Skies Through Education
VIP Movement Notification – Atlanta, GA
Notice Number: NOTC3760
July 30, 2024
Atlanta, GA
5 NMR – 4,999′ AGL
Specific instructions and restrictions are available at http://tfr.faa.gov once the NOTAM has been issued.
*Depicted TFR data may not be a complete listing. Pilots should not use the information on this website for flight planning purposes. For the latest information, call your local Flight Service Station at 1-800-WX-BRIEF
Registration is Now Open
Registration for the upcoming 26th Annual Expeditionary Warfare Conference is now open. This classified event will take place on October 22 – 24, 2024, at the JHU Applied Physics Laboratory Kossiakoff Center in Laurel, MD.
What to expect at the Expeditionary Warfare Conference:
A gathering of military professionals, experts, and thought leaders from around the world to discuss the latest advancements and challenges in expeditionary warfare
Dynamic live sessions over the course of two engaging days
Innovative industry displays
Valuable networking opportunities
This year’s theme, Accelerating Innovation to Enhance Expeditionary Warfare, will allow you to explore the force structure design, operations, and acquisition processes that support the expeditionary warfare community.
This will be a fully classified event at the Secret U.S. Only level. To secure your spot and ensure your participation in this can’t miss event, we encourage you to register as early as possible. A more detailed agenda will be available soon.
Accommodations
A block of rooms is being held at the Homewood Suites by Hilton Columbia/Laurel for attendees. The block is open until Friday, September 20, 2024, so book your room today. Please note that these rooms are available on a first-come, first-served basis and may sell out prior to the cut-off date.
Security Information
This event is classified at the Secret U.S. Only level. All attendees must be U.S. Citizens holding a Secret or higher clearance. For visit request submittal instructions, please visit our security information page.
Maximize your Visibility
Maximize your organization’s participation and visibility at the 26th Annual Expeditionary Warfare Conference by becoming an event sponsor!
Contact Tiffiney Smith, tsmith@NDIA.org, with questions or if you are ready to invest.
![]()
Date
October 22 – 24, 2024
![]()
Location
The Johns Hopkins University
Applied Physics Laboratory
11100 Johns Hopkins Rd.
Laurel, MD 20723
![]()
Contact
Tiffiney Smith
Meeting Manager
(703) 247-2554
tsmith@NDIA.org
P.S. Check us out on social media!
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
Henry Repeating Arms Donates 50 Custom Rifles for 10-Year-Old Florida Girl’s Cancer Treatments
RICE LAKE, Wis., July 25, 2024 – Henry Repeating Arms, the world’s leading lever-action firearm manufacturer, announced today the release of a limited-edition series of fifty “Team Baylee” lever-action rifles to raise funds for the family of 10-year-old Baylee Rish of Wewahitchka, Florida. The donated rifles, which are now available for purchase while supplies last are a continuation of the company’s ‘Guns For Great Causes’ charitable efforts, focusing primarily on pediatric cancer cases and children’s cancer hospitals.
In December 2022, Baylee was diagnosed with B-cell acute lymphoblastic leukemia (B-ALL), a rare and aggressive form of blood and bone marrow cancer. Treatment is intense, with some weeks consisting of up to four consecutive days of chemotherapy treatment, spinal tap chemo injections, and spinal bone marrow sampling, and there is still more to come as her course of treatment runs through March 2025.
Available exclusively through Henry Repeating Arms’ website, all proceeds from the “Team Baylee” rifle sales will be given to the Rish family to help offset mounting insurance copays and the out-of-pocket expenses associated with traveling 2.5 hours each way for treatment. Additionally, the first and last rifles in the collection, serial numbers TEAMBAYLEE01 and TEAMBAYLEE50, are up for auction to allow collectors the chance to enhance the fundraising effort. Total proceeds should exceed $40,000.
“There are few things in this world more unfair than a childhood cancer diagnosis,” said Anthony Imperato, Founder and CEO of Henry Repeating Arms. “To endure what these kids go through during treatment and still be able to crack a smile that lights up the room is nothing short of awe-inspiring. The opportunity to help these families is a part of our business that I deeply cherish, and I’m sending a big hug to Baylee and her family.”
The Henry “Team Baylee” limited-edition rifle is built on the award-winning Golden Boy Silver .22 S/L/LR with features including a nickel-plated receiver cover, barrel band, and buttplate, a 20” polished blued steel octagon barrel, and genuine American walnut furniture embellished with playful artwork inspired by Baylee’s life. Her love of animals and her desire to be a dolphin trainer when she grows up takes center stage with a bottlenose dolphin diving out of a wave and over the words “Team Baylee.” A paintbrush adds a streak of purple, which complements the vibrant marine blues and represents Baylee’s love for drawing and painting. Baron Engraving of Trumbull, Connecticut, donated their services for the artwork design, engraving, and hand painting.
“Our family would like to thank the team at Henry sincerely. Your kindness and generosity are unbelievable and have brought us to tears many times throughout the process,” said Blake Rish, Baylee’s father. “To all of the amazing people buying and bidding on these rifles, I truly hope we cross paths one day so we can personally hug your neck and say thank you.”
For more information about the “Team Baylee” rifle, visit henryusa.com/teambaylee. The first and last rifles in the series are up for auction on Gunbroker.com until August 7th at 9:00 pm Eastern. All firearm purchases must ship to a federally licensed firearms dealer.
To learn more about Henry Repeating Arms, its products, and its Guns For Great Causes charitable endeavors, visit HenryUSA.com and order a free catalog.
About Henry Repeating Arms:
Henry Repeating Arms is one of the leading rifle and shotgun manufacturers in the United States and a world leader in the lever action category. The company motto is “Made in America, or not made at all,” and its firearms come with a lifetime guarantee backed by award-winning customer service. The company is also known for its Guns For Great Causes charitable program, which focuses on assisting the families of sick children, children’s hospitals, military veteran organizations, Second Amendment advocacy groups, and wildlife conservation organizations. The company currently employs over 550 people and has over 330,000sf of manufacturing space in its Wisconsin and New Jersey facilities. The company is named in honor of Benjamin Tyler Henry, who invented and patented the Henry lever action rifle in 1860 – the first practical repeating rifle and America’s unique contribution to the international stage of firearms design. Visit Henry Repeating Arms online at henryusa.com .
Any Questions?
Contact Our Award-Winning Henry Service Team
Henry Repeating Arms
107 W Coleman Street
Rice Lake, WI 54868-2452

Save the Date!
We’re inviting you to attend the CBRN Quarterly Fall Forum on Wednesday, October 16, 2024, at the NDIA headquarters in Arlington, VA.
This year’s conference will cover U.S. Biological Posture and U.S. UK National Biological Defense Strategy Updates. At this forum, participants have the opportunity to engage in ongoing discussions between the Chemical Biological Defense Enterprise and Industry about the requirements for a robust CBRNE Industrial Base and the obstacles we encounter.
Registration for this event is set to open soon!
Sponsorship Opportunities
Exciting sponsorship opportunities are on the horizon! Elevate your organization, product, or service by sponsoring the CBRN Quarterly Fall Forum. Increase your brand visibility and connect with attendees who are eager to learn more about what you have to offer. Stay tuned for details on how you can seize these sponsorship opportunities soon!
Contact Raven LeMay at rlemay@NDIA.org to be added to the interest list to have first priority when sponsorships are available.
![]()
Date
October 16, 2024
![]()
Location
National Defense Industrial Association
2101 Wilson Blvd #700
Arlington, VA, 22201
![]()
Contact
Raven LeMay
Meeting Planner
rlemay@NDIA.org
(703) 247-2540
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
Elevate your firearm maintenance with our specially curated cleaning kits for rifles and pistols. Each kit includes essential cleaning tools and accessories for optimal maintenance. Moreover, each kit has a free pre-selected patch to complement your collection. Don’t miss out on this fantastic offer!
Shop now at fnestore.com
*The patches are pre-selected and can not be swapped or substituted.
FN eStore 5651 State Road 93 Eau Claire, Wisconsin 54701
We’ve created a few videos to help you see how MantisX will effectively help you improve your accuracy and will give you real-time feedback for muzzle movement. Get real-time feedback today and take a second look at MantisX.
Mantis X10 Elite – Shooting Performance System
MantisX 2270 US Highway 30 Oswego, Illinois 60543

LIMITED EDITION T
Commemorating the launch of Winchester Life Season 3 debuting on Waypoint TV
We’re rolling out a limited edition T. Be sure to order now before they disappear.

WINCHESTER LIFE COTTON T-SHIRT – Front
Your very own “Winchester Life” T proudly displays its namesake logo on the front along with a compass pointing due north on the back. Made from 100% super-soft ring-spun cotton for the ultimate in comfort, this T features a classic fit,

WINCHESTER LIFE COTTON T-SHIRT – Back
rib collar, taped neck and shoulders for durability and comfort plus a tear away size able. Grab your favorite gear, load up the truck and head off into the wilderness with your Winchester Life T – the legend of Winchester lives on through you wherever you go.
Winchester Ammunition
600 Powder Mill Road
East Alton, IL 62024

The Prodigy™ from Springfield Armory takes the proven 1911 platform and enhances it with double-stack capacity and a performance-driven feature set. Now available with a durable Coyote Brown Cerakote® finish, the Prodigy features a polymer grip mounted to a forged steel frame, offering capacities of 17+1 and 20+1. The double-stack magazine feeds your choice of a 4.25 or 5-inch bull barrel with an 11-degree crown for match-grade accuracy. Optics-ready, the Prodigy utilizes AOS (Agency Optic System) plates with an integrated rear sight, allowing for proper sight alignment and an intuitive sight picture. Each Prodigy ships with a HEX™ Dragonfly-compatible plate, while additional optic-specific plates are available for purchase.

The Coyote Brown Cerakote® finish on the Prodigy enhances durability and performance but also offers significant benefits in terms of longevity and ease of care, making it an invaluable asset in the world of firearm technology.
1911 DS Prodigy™ 4.25″ AOS 9mm – Coyote Brown
MFG# PH9117AOSCB / UPC# 706397974022
1911 DS Prodigy™ AOS 9mm – Coyote Brown
MFG# PH9119AOSCB / UPC# 706397974046
1911 DS Prodigy™ 4.25″ AOS 9mm – Coyote Brown, Low Capacity
MFG# PH9117AOSCBLC / UPC# 706397974039
1911 DS Prodigy™ AOS 9mm – Coyote Brown, Low Capacity
MFG# PH9119AOSCBLC / UPC# 70639797053
HANDS-ON REVIEW: COYOTE BROWN 1911 DS PRODIGY
I am going to venture that, while many of the readers of The Armory Life may be truly “tactical” in training and experience, the vast majority of us could be better described as “practical” in our lives and our gear. Whether the intended purpose is competition, hunting or self-defense, firearms are an important part of that gear.

Springfield Armory, 650 Weber Drive, Geneseo, IL 61254, USA, 800-680-6866
If you are having trouble reading this email, read the online version.

Lena Miculek Breaks Records at USPSA Multi-Gun National Championship
NEWINGTON, N.H., (July 24, 2024) – SIG SAUER, Inc. congratulates Team SIG professional shooter Lena Miculek on her remarkable achievements at the 2024 USPSA Multi-Gun Nationals including a record-breaking, highest-ever finish by a female in National Multi-Gun competition, in addition to defending her High Lady title.

“Lena crushed Multi-Gun Nationals, there’s just no other way to say it,” said Robby Johnson, Chief Marketing Officer, SIG SAUER, Inc. “She is a force to be reckoned with, not just in the female divisions, but amongst all competitors. To achieve this level of success, it is a life commitment; Lena lives this day in and day out and all her glory is the result of preparation, training, and the absolute hardest work – nothing is given. On behalf of everyone at SIG SAUER words cannot express how proud we are of her and how excited we are to see what comes next. Congratulations, Lena.”
At the 2024 USPSA Multi-Gun National Championship, Miculek easily defended her High Lady title through eight field courses and four speed shoots using a SIG M400 with ROSE features and a TANGO6T riflescope, a P320-DH3 pistol with ROSE features and a ROMEO1 Pro optic, and SIG SAUER Match Elite competition ammunition.

Lena Miculek, Team SIG Professional shooter added, “this year’s competition was the most accuracy-intensive Multi-Gun Nationals I have ever competed at. Thankfully, I made the switch to the fastest growing Modified Division where I could utilize a red dot on my pistol, a bipod on my rifle, and thirteen shells to start in shotgun. The equipment changes, combined with my training, support of my team, and the backing of SIG SAUER led me to first place and my best overall results to date.”
The M400 prototype ROSE rifle Miculek used at the 2024 Multi-Gun Nationals is currently in development and is a variant of the SIG SAUER M400 series.
The 2024 USPSA Multi-Gun Nationals was held at the Forest Lakes Sportsman’s Club in Forest Lake, Minnesota, July 19 – 21, 2024. Miculek will compete next at the International Practical Shooting Competition (IPSC) Rifle World Shoot on the U.S. Ladies Open Team beginning August 4, 2024 at Ruutikangas Shooting Center in Liminka, Finland.
For more information about the SIG SAUER equipment used by Team SIG Professional Shooter Lena Miculek visit sigsauer.com.
About SIG SAUER, Inc.
SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: sigsauer.com.

FIREARMS • AMMUNITION • ELECTRO-OPTICS • SUPPRESSORS • AIRGUNS • TRAINING
![]()
July 23, 2024![]()
SAAMI Auction Raises Funds for NSSF’s Project ChildSafe

WASHINGTON, D.C. — At its recent annual board and committee meetings in Salt Lake City, the Sporting Arms and Ammunition Manufacturers’ Institute® auctioned many generously donated products from industry to raise $10,000 in support of Project ChildSafe®, the firearm safety program of NSSF®, The Firearm Industry Trade Association.
SAAMI® is the organization at the forefront of promoting firearm safety by creating standards that ensure safety, reliability and interchangeability of firearms, ammunition, and components.
“Promoting firearm safety has long been a top priority for SAAMI and NSSF, and so it’s appropriate for SAAMI to help support NSSF’s Project ChildSafe, the national’s largest firearm safety program,” said SAAMI President and CEO Joe Bartozzi, who also is NSSF’s President and CEO and Chairman of the Project ChildSafe Foundation. “This donation will help Project ChildSafe reach more people with their firearm safety reminders and resources to help prevent firearm-related accidents, suicides and thefts.”
SAAMI’s $10,000 donation was made to the Project ChildSafe Foundation, a 501(c)(3) charity that helps the Project ChildSafe program meet the high demand for its firearm safety resources. The Project ChildSafe Foundation accepts donations year-round here and is helping Project ChildSafe reach its 25th anniversary goal of raising $250,000 to reach more firearm owners with the message of “Own It? Respect It. Secure It.”
Project ChildSafe promotes securely storing firearms when they’re not in use through the distribution of free gun locks and educational materials. Now in its 25th year of promoting safety in all 50 states and the five U.S. territories, Project ChildSafe has partnered with more than 15,000 law enforcement departments to distribute 41 million firearm safety kits that include a gun lock and safety booklet.
Industry sponsors of the SAAMI auction were Ammo-Up USA, B5 Systems, Beretta, Browning, Colt Manufacturing, Douglas Barrels, Fiocchi of America, Glock, Henry Repeating Arms, Hodgdon Powder, Hornady Manufacturing, Kahr Firearms Group, Kent Cartridge, Kinsey Rhea, Lyman Products, MCR Safety, North American Arms, Nosler, NSSF, O.F. Mossberg, Olin Corp./Winchester Div., Smith & Wesson, St. Mark’s Powder, Ruger, Taurus, The Kinetic Group, True Velocity Ammunition, X-Vision Optics and New River Energetics.
About SAAMI
The Sporting Arms and Ammunition Manufacturers’ Institute, founded in 1926 at the request of the federal government, is dedicated to creating and promulgating technical, performance and safety standards for firearms, ammunition and components, and is committed to being the preeminent global resource for the safe and responsible design, manufacture, transportation, storage and use of these products.
SAAMI | 6 Corporate Drive | Shelton, CT 06484 US

Don’t compromise on quality for your smaller firearms. The GMT Sling’s 1.00″ option delivers the same durability in a streamlined package.
Get the Blue Force Gear® ULoop™ and Install in Seconds
1-386-888-6230 | Text: “FREE” to get FREE SHIPPING for subscribing to our SMS text updates
Corporate Office – 166 Pine Barren Rd. Pooler, GA 31322
Blue Force Gear, Inc.
We hope you join us at 2024 Emerging Technologies for Defense Conference & Exhibition. You will be able to take part in specific Chem Bio Defense-related activities and collaborate with experts to advance the use of emerging technologies for chem-bio defense missions.
Don’t Miss These Panels
EUCOM / AFRICOM ENDURING CHALLENGES PANEL
Featuring:
Matthew Bush, Strategy Program Manager, U.S. European Command J5
Dr. Kevin Cohen, Deputy Commander, Special Advisor, U.S. European Command
Fred Gregory, Chief, Strategic Capabilities Division, U.S. Africa Command
SCIENCE AND EMERGING TECHNOLOGIES
Featuring:
Chris Manning, Deputy Assistant Secretary of the Army for Research and Technology
RADM Kurt Rothenhaus, USN Chief of Naval Research, Office of Naval Research
Kristen Baldwin, Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering, Office of the Assistant Secretary of the Air Force (Acquisition, Technology, and Logistics)
Col Dr. Benjamin “Bach” Bishop, USAF (Ret), Deputy Director, Adaptive Capabilities Office DARPA
GAMECHANGERS – BIOTECHNOLOGY
Featuring:
Dr. Peter Emanuel, Senior Research Scientist for Bioengineering, U.S. Army Combat Capabilities Development Command Chemical Biological Center
Plus, more than 100 technology leaders, 1-on-1 “speed pitches” to government customers, Exhibit Hall, Breakout tracks, and technical presentations!!!
Join us at NDIA’s Emerging Technologies Conference to
Find new partnership opportunities for your organization
Learn about ongoing and upcoming government initiatives
Discover game-changing emerging technology developments
Network with government and industry peers
Thank you to our Sponsors
_2834557.jpg)
Contact Allison H. Carpenter at ahcarpenter@NDIA.org to secure your exhibit space and sponsorship today.
What is Emerging Technologies Institute (ETI)?
NDIA’s Emerging Technologies Institute (ETI) is a non-partisan institute focused on technologies that are critical to the future of national defense. ETI provides research and analyses to inform the development and integration of emerging technologies into the defense industrial base. For more information on ETI activities, visit our YouTube page.
![]()
Date
August 7 – 9, 2024
![]()
Location
Walter E. Washington
Convention Center
801 Allen Y. Lew Place NW, Washington, DC 20001
![]()
Contact
Undral Dalai
Meeting Manager
udalai@NDIA.org
National Defense Industrial Association
2101 Wilson Boulevard, Suite 700
Arlington, VA 22201
Click here to unsubscribe.