Fix It Sticks Introduces Four Must Have Firearms Tool Kit Components

Chicago, IL– Fix It Sticks, the industry innovator of modular firearms maintenance tools and torque limiters has introduced a Brass Pin Punch Set, Extended Action Bits, a Brass Hammer Head bit and 140 Inch Pound Torque Limiter.  These new items significantly increase the functionality of any Fix It Sticks tool system as well as perform as stand-alone products.

Brass Pin Punch Set

The Brass Pin Punch Set is indispensable for any firearms tool kit.  These are perfect for drifting sights, removing trigger group pins, or any other disassembly or assembly of firearms or equipment requiring pin removal and reinstallation.  Pin Punches are in the following sizes: 1/16″, 3/32″, 1/8″, 5/32″, 3/16″ and 1/4″.  Machined form solid bar stock, the Brass Pin Punches have steel inserts in the base to work with magnetic drivers .  The Brass Pin Punch Set works with the Fix It Sticks system as well as any other ¼ hex driver and has an MSRP of $30.00

Extended Action Bits

Action screws can be difficult to reach depending on trigger guards, magazine wells, etc.  The new Fix It Sticks Extended Action Bits are designed to work with these hard to reach screws.  Made with a ball end hex head to allow maximum access to screws, the Extended Action Bits are available in  3/16″ for Remington 700, AICS and similar, 5/32″ for Ruger 10/22 V-Block and similar, 1/8″ for KIDD, and T30 for numerous Precision Rifles (T30 is not a Ball End).  These integrate with the Fix It Sticks tool system as well as work with any ¼” hex driver and have an MSRP of $8.00 each.

Brass Hammer Head

A small hammer can be indispensable when out in the field, but is seldom if ever something on hand when needed.  Fix It Sticks solves this issue with the Brass Hammer Head.  Designed with a steel insert to work with magnetic drivers, the Brass Hammer Head is perfect for those firearms related tasks that require tapping and light hammer strikes.  The Brass Hammer Head is now available with an MSRP of $8.00

140 Inch Pound Torque Limiter

For fasteners requiring substantial torque, Fix It Sticks now offers a 140 Inch Pound Torque Limiter.  The preset torque limiters also use ¼” bits and tighten to the specified inch/lbs at which point they spin freely. Fix It Sticks torque limiters will work with any ¼” bit driver.  The 140 Inch Pound Torque Limiter is now available with an MSRP of $45.00

About Fix It Sticks:  Fix It Sticks is a highly modular multi-tool system featuring a variety of specialty tools and torque limiters, along with standard 1/4″ bits, to keep your gear running at the range and in the field.  Unlike other multi-tools out there, which compromise function for portability, Fix It Sticks uses a T-handle concept to give you the best of both worlds: shop level function, paired with light weight and portability.